Other Name: Latch, Rear Compartment Lid Or Tail Gate Latch; Trunk Latch; Door Lock; Latch; Latch, Rear Compartment Lid Release Or Ajar; Latch, Rear Compartment Lid
Position: Rear
Replaces: 25705649, 15898978, 25771898
Fits the following Cadillac Models:
CTS | 2003-2007 | Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
STS | 2005-2011 | Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
Other Name: Lock Assembly, Rear Compartment Lid Or Tail Gate Latch; Trunk Latch; Door Lock; Lock, Rear Compartment Lid Or Tail Gate Latch; Lock, Rear Compartment Lid
Position: Rear
Fits the following Cadillac Models:
Brougham | 1987-1992 | Base, d'Elegance | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
DeVille | 1984-1987 | Base, Cabriolet, d'Elegance, Touring | 8 Cyl 4.1 L GAS, 8 Cyl 5.7 L DIESEL
Eldorado | 1984-1985 | Base, Biarritz | 8 Cyl 4.1 L GAS, 8 Cyl 5.7 L DIESEL
Fleetwood | 1990, 1984-1986 | Base, Brougham, Brougham d'Elegance, Formal | 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 6.0 L GAS
Seville | 1984-1985 | Base, Elegante | 8 Cyl 4.1 L GAS, 8 Cyl 5.7 L DIESEL
Other Name: Actuator, Door Electric And Vacuum Locks; Door Lock Actuator Motor; Door Lock Actuator; Power Actuator; Latch Actuator; Lock Solenoid; Lock; Actuator; Actuator, Door And End Gate Electrical
Position: Front
Replaces: 22020256, 22049686
Fits the following Cadillac Models:
Brougham | 1987-1992 | Base, d'Elegance | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
Cimarron | 1984-1988 | Base, d'Oro | 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
DeVille | 1984-1992 | Base, Cabriolet, d'Elegance, Spring Edition, Touring | 6 Cyl 4.3 L DIESEL, 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 4.9 L GAS, 8 Cyl 5.7 L DIESEL
Eldorado | 1984-1991 | Base, Biarritz, Cabriolet, Spring Edition, Touring | 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 4.9 L GAS, 8 Cyl 5.7 L DIESEL
Escalade | 1999-2000 | Base | 8 Cyl 5.7 L GAS
Fleetwood | 1984-1991 | 60 Special, 75, 75 Formal, Base, Brougham, Brougham d'Elegance, d'Elegance, Formal | 6 Cyl 4.3 L DIESEL, 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 4.9 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 6.0 L GAS
Seville | 1985-1991 | Base, Elegante, STS | 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 4.9 L GAS
Other Name: Latch Assembly-End Gate *Marked Print; Trunk Latch; Door Lock; Latch; Latch, End Gate Lock
Position: Passenger Side
Replaces: 15960866
Fits the following Cadillac Models:
Escalade | 1999-2000 | Base | 8 Cyl 5.7 L GAS
| Page 1 of 3 |Next >
1-20 of 44 Results
Cadillac Tailgate Latch
Choose OEM Tailgate Latch, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Cadillac's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Cadillac Tailgate Latch. You can shop at highly competitive prices and protect your budget. All our genuine Cadillac parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.
Q: How to replace the tailgate latch on Cadillac Escalade?
A:
Begin by lowering the endgate next to step by step bolt loosening on the handle followed by raising the endgate. Move the handle bezel through careful pressure on the upper tabs until the linkage rods detach. Support the gate downwards before you take out the cables that pass through the bolt which holds the latch assembly and the side panel cable retainer bolts. Pull the linkage rod off the latch assembly before taking out the latch assembly from the endgate. Installation requires engagements of the linkage rod to the latch assembly followed by latch installation to the vehicle while observing Fastener Notice in Service Precautions. Fasten the latch assembly bolts at 25 N.m (18 lb ft) torque. Attach endgate cable links to side panel retainer bolts while engaging the linkage rods then hoist the endgate into position afterward placing the bezel and torqueing handle bolts to 25 N.m (18 lb ft).
Q: How to replace the tailgate latch on Cadillac Escalade ESV?
A:
Begin by lowering the endgate while loosening the handle bolts before raising the endgate. Start by prying gently on the upper retainer tabs of the handle bezel to disengage both linkage rods. First support the endgate when lowered before removing the cables from their bolts securing the side panel cable retainers and the latch assembly bolt. Remove the endgate's latch assembly by taking away the linkage rod that connects to this assembly. Follow Service Precautions Fastener Notice during vehicle assembly to engage the linkage rod with the latch assembly then place the assembly on the vehicle. Secure the latch assembly bolts at a torque setting of 25 N.m (18 lb ft). Attach endgate cables to side panel cable retainer bolts while linking rods to the rear and lift the endgate up to install its handle bezel which must fully plug into position before tightening bolts to 25 N.m (18 lb ft). Tighten the handle bolts to 25 N.m (18 lb ft) torque specifications.