How to replace the liftgate hinges on Cadillac SRX?

Mark the position of the liftgate hinges with a grease pencil before you open the liftgate to start replacing them. Take off the upper right vehicle body grommet, disconnect its electrical connector and washer hose before doing the same on the upper left side and disconnecting both electrical connectors. Keep the liftgate open while disconnecting its assist rods from the top ball studs. Open the access panel doors in the header trim panel and take off the nuts that hold the liftgate hinge to the vehicle. With help raise the liftgate off the vehicle while you disconnect bolts between the hinges and liftgate. You should install the new liftgate hinges by setting them exactly at the vehicle location marks then bolt them to the liftgate and tighten the nuts to 25 N.m (20 lb ft). A partner holds the liftgate while you connect the vehicle mounting nuts before slamming the access doors in the header trim panel and fitting the liftgate support rods to the upper holder stud. Reconnect two electrical connectors at the upper left corner then install the grommet while placing the liftgate support. Afterward, link the electrical connector and washer hose at the upper right corner and set the grommet there before returning the liftgate to its place.

How to replace the trunk/liftgate hinge on the removable rear panel mid gate on Cadillac Escalade?

Before starting the task push the rear seat down and verify that the rear mid gate is stowed and closed tight. Take out the hinge trim cover from the mid-gate area before removing the hinge attachment nuts and separating the hinge from the vehicle. Fix the hinge to the vehicle while keeping the Fastener Notice from Service Precautions in mind. Install the four retaining nuts and tighten them using a torque value of 25 N.m (18 lb ft). Put the hinge trim cover in position over its opening and raise the rear seatback.

OEM Cadillac Liftgate Hinge

Luggage Compartment Door Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

48 Liftgate Hinges found

View related parts
Cadillac Hinge, Rear Driver Side Part Number: 84844097
$292.06 MSRP: $436.65
You Save: $144.59 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge, Rear Compartment Lid And End Gate; Door Hinge; Hinge, Rear Compartment Lid
- Position: Rear Driver Side
- Replaces: 84721079, 84617930
Fits the following Cadillac Models:
- CT5 | 2020-2024 | Luxury, Premium Luxury, Sport, V, V Blackwing | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
Cadillac Hinge, Passenger Side Part Number: 84256736
$120.09 MSRP: $201.37
You Save: $81.28 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Liftgate Hinge; Door Hinge; Hinge, Rear Compartment Lid And End Gate
- Position: Passenger Side
Fits the following Cadillac Models:
- XT6 | 2020-2024 | Luxury, Premium Luxury, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Cadillac Hinge, Driver Side Part Number: 84256735
$145.50 MSRP: $219.49
You Save: $73.99 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Liftgate Hinge; Door Hinge; Hinge, Rear Compartment Lid And End Gate
- Position: Driver Side
Fits the following Cadillac Models:
- XT6 | 2020-2024 | Luxury, Premium Luxury, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Cadillac Hinge Part Number: 84798262
$26.19 MSRP: $40.99
You Save: $14.80 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge, Rear Compartment Lid And End Gate
- Replaced by: 85812747
Fits the following Cadillac Models:
- LYRIQ | 2023-2024 | Luxury, Sport, Tech | BATTERY EV (EV/BEV)
View related parts
Cadillac Hinge, Rear Passenger Side Part Number: 23350972
$47.91 MSRP: $69.15
You Save: $21.24 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge, Rear Hatch Window; Liftgate Hinge; Door Hinge; Hinge, Rear Compartment Lid And End Gate
- Position: Rear Passenger Side
Fits the following Cadillac Models:
- XT5 | 2017-2023 | Base, Livery, Luxury, Platinum, Premium Luxury, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Cadillac Hinge, Passenger Side Part Number: 23276956
$17.66 MSRP: $27.64
You Save: $9.98 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Liftgate Hinge; Door Hinge; Hinge, Rear Compartment Lid And End Gate
- Position: Passenger Side
Fits the following Cadillac Models:
- XT4 | 2019-2024 | Luxury, Premium Luxury, Sport | 4 Cyl 2.0 L GAS
View related parts
Cadillac Hinge, Rear Driver Side Part Number: 23227800
$59.29 MSRP: $88.25
You Save: $28.96 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge, Rear Compartment Lid And End Gate; Door Hinge
- Position: Rear Driver Side
- Replaces: 23179230
Fits the following Cadillac Models:
- ATS | 2015-2019 | Base, Luxury, Performance, Premium, Premium Luxury, Premium Performance, V | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Cadillac Hinge Part Number: 15134524
Product Specifications
- Other Name: Hinge, End Gate Closing; Liftgate Hinge; Door Hinge
- Replaces: 15767489, 15762178
Fits the following Cadillac Models:
- Escalade | 2002-2006 | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Escalade ESV | 2003-2006 | Base | 8 Cyl 6.0 L GAS
View related parts
Cadillac Lift Cylinder, Rear Driver Side Part Number: 23198275
$87.33 MSRP: $129.98
You Save: $42.65 (33%)
Product Specifications
- Other Name: Hinge, Rear Compartment Lid; Back Glass Lift Support; Liftgate Door Support.; Hinge Assembly
- Position: Rear Driver Side
Fits the following Cadillac Models:
- ELR | 2014-2016 | Base | 4 Cyl 1.4 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Cadillac Hinge, Passenger Side Part Number: 20728028
Product Specifications
- Other Name: Hinge Assembly Rear Compartment Lid; Door Hinge; Hinge, Rear Compartment Lid
- Position: Passenger Side
Fits the following Cadillac Models:
- Eldorado | 1986-1991 | Base, Biarritz, Spring Edition, Touring | 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 4.9 L GAS
- Seville | 1986-1991 | Base, Elegante, STS | 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 4.9 L GAS
View related parts
Cadillac Hinge Part Number: 15645317
Product Specifications
- Other Name: Hinge, End Gate Closing; Liftgate Hinge; Door Hinge
Fits the following Cadillac Models:
- Escalade | 1999-2000 | Base | 8 Cyl 5.7 L GAS
View related parts
Cadillac Hinge Part Number: 15645318
Product Specifications
- Other Name: Hinge, End Gate Closing; Liftgate Hinge; Door Hinge
Fits the following Cadillac Models:
- Escalade | 1999-2000 | Base | 8 Cyl 5.7 L GAS
View related parts
Cadillac Hinge Part Number: 14039220
Product Specifications
- Other Name: Hinge, Hood Panel
Fits the following Cadillac Models:
- Brougham | 1987-1989 | Base, d'Elegance | 8 Cyl 5.0 L GAS
- DeVille | 1984-1988 | Base, Cabriolet, d'Elegance, Touring | 6 Cyl 4.3 L DIESEL, 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 5.7 L DIESEL
- Fleetwood | 1984-1988 | 60 Special, 75, 75 Formal, Base, Brougham, Brougham d'Elegance, d'Elegance, Formal | 6 Cyl 4.3 L DIESEL, 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 6.0 L GAS
View More
View related parts
Cadillac Hinge, Rear Passenger Side Part Number: 20633144
Product Specifications
- Other Name: Hinge, Rear Compartment Lid; Door Hinge
- Position: Rear Passenger Side
Fits the following Cadillac Models:
- DeVille | 1985-1988 | Base, Cabriolet, d'Elegance, Touring | 6 Cyl 4.3 L DIESEL, 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS
- Fleetwood | 1985-1988 | 60 Special, 75, 75 Formal, Base, Brougham, Brougham d'Elegance, d'Elegance | 6 Cyl 4.3 L DIESEL, 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Cadillac Hinge, Rear Passenger Side Part Number: 25543720
Product Specifications
- Other Name: Hinge, Rear Compartment Lid; Door Hinge
- Position: Rear Passenger Side
Fits the following Cadillac Models:
- 60 Special | 1993 | Base | 8 Cyl 4.9 L GAS
- DeVille | 1989-1993 | Base, Spring Edition, Touring | 8 Cyl 4.5 L GAS, 8 Cyl 4.9 L GAS
- Fleetwood | 1989-1993 | 60 Special, Base, Brougham, d'Elegance | 8 Cyl 4.5 L GAS, 8 Cyl 4.9 L GAS, 8 Cyl 5.7 L GAS
View More
View related parts
Cadillac Hinge, Rear Driver Side Part Number: 25543721
Product Specifications
- Other Name: Hinge, Rear Compartment Lid; Door Hinge
- Position: Rear Driver Side
Fits the following Cadillac Models:
- 60 Special | 1993 | Base | 8 Cyl 4.9 L GAS
- DeVille | 1989-1993 | Base, Spring Edition, Touring | 8 Cyl 4.5 L GAS, 8 Cyl 4.9 L GAS
- Fleetwood | 1989-1993 | 60 Special, Base, Brougham, d'Elegance | 8 Cyl 4.5 L GAS, 8 Cyl 4.9 L GAS, 8 Cyl 5.7 L GAS
View More
View related parts
Cadillac Hinge, Rear Passenger Side Part Number: 25697611
Product Specifications
- Other Name: Hinge, Rear Compartment Lid And End Gate; Door Hinge; Hinge, Rear Compartment Lid
- Position: Rear Passenger Side
- Replaces: 25632950
Fits the following Cadillac Models:
- Seville | 1998-2004 | SLS, STS | 8 Cyl 4.6 L GAS
View related parts
Cadillac Hinge Part Number: 15260499
Product Specifications
- Other Name: Liftgate Hinge; Door Hinge; Hinge, End Gate Closing
Fits the following Cadillac Models:
- Escalade | 2009-2013 | Hybrid, Hybrid Platinum | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
View related parts
Cadillac Hinge Assembly, Rear Driver Side Part Number: 20578533
Product Specifications
- Other Name: Hinge, Rear Compartment Lid; Door Hinge; Hinge
- Position: Rear Driver Side
Fits the following Cadillac Models:
- Brougham | 1990-1992, 1988 | Base, d'Elegance | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Cadillac Hinge, Rear Driver Side Part Number: 20166703
Product Specifications
- Other Name: Hinge, Rear Compartment Lid And End Gate; Door Hinge
- Position: Rear Driver Side
Fits the following Cadillac Models:
- Cimarron | 1984-1988 | Base, d'Oro | 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS

| Page 1 of 3 |Next >

1-20 of 48 Results

Cadillac Liftgate Hinge

Choose OEM Liftgate Hinge, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Cadillac's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Cadillac Liftgate Hinge. You can shop at highly competitive prices and protect your budget. All our genuine Cadillac parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Cadillac Liftgate Hinge enhances daily cargo access with smart, confident, and enduring movement. Cadillac represents bold luxury and does not bother with any chest-thumping, but integrates crisp design, strong engines, and cabins full of user-friendly technology that assure drivers that they are proud on the boulevard, comfortable on the road journey without rummaging through boring menu books. Cadillac is also maintaining momentum with electric platforms such as the Celestiq that envelope hand-crafted work with next-gen batteries to demonstrate that heritage can run into the future instead of fading away in nostalgia. Cadillac incorporates the symbols of the past with current safety stacks and smooth dashboards, which provide teens or grandparents with the same motivation to smile when the start button displays blue. Liftgate Hinge incorporates corrosion-resistant alloys and narrow pivot tolerance to ensure that the rear door remains in line, therefore the hatch lifts easily in the winter snow, closes identically in summer heat, and rattles not on washboard gravel. Liftgate Hinge helps frame the weight of the panel evenly among the bracket arms and relieves the latch of all the stress and saves you the two-hand push that is tiresome with the cheap kinds of hinges. Liftgate Hinge hence protects paint, weather seals, and cargo peace by providing reliable motion mile after mile, regardless of whether the vehicle is carrying groceries or camping equipment.

Cadillac Liftgate Hinge Parts and Q&A

Hinge, Passenger Side
25771997
Q: How to replace the liftgate hinges on Cadillac SRX?
A:
Mark the position of the liftgate hinges with a grease pencil before you open the liftgate to start replacing them. Take off the upper right vehicle body grommet, disconnect its electrical connector and washer hose before doing the same on the upper left side and disconnecting both electrical connectors. Keep the liftgate open while disconnecting its assist rods from the top ball studs. Open the access panel doors in the header trim panel and take off the nuts that hold the liftgate hinge to the vehicle. With help raise the liftgate off the vehicle while you disconnect bolts between the hinges and liftgate. You should install the new liftgate hinges by setting them exactly at the vehicle location marks then bolt them to the liftgate and tighten the nuts to 25 N.m (20 lb ft). A partner holds the liftgate while you connect the vehicle mounting nuts before slamming the access doors in the header trim panel and fitting the liftgate support rods to the upper holder stud. Reconnect two electrical connectors at the upper left corner then install the grommet while placing the liftgate support. Afterward, link the electrical connector and washer hose at the upper right corner and set the grommet there before returning the liftgate to its place.
Hinge
15134524
Q: How to replace the trunk/liftgate hinge on the removable rear panel mid gate on Cadillac Escalade?
A:
Before starting the task push the rear seat down and verify that the rear mid gate is stowed and closed tight. Take out the hinge trim cover from the mid-gate area before removing the hinge attachment nuts and separating the hinge from the vehicle. Fix the hinge to the vehicle while keeping the Fastener Notice from Service Precautions in mind. Install the four retaining nuts and tighten them using a torque value of 25 N.m (18 lb ft). Put the hinge trim cover in position over its opening and raise the rear seatback.