How to replace the liftgate hinges on Cadillac SRX?

Mark the position of the liftgate hinges with a grease pencil before you open the liftgate to start replacing them. Take off the upper right vehicle body grommet, disconnect its electrical connector and washer hose before doing the same on the upper left side and disconnecting both electrical connectors. Keep the liftgate open while disconnecting its assist rods from the top ball studs. Open the access panel doors in the header trim panel and take off the nuts that hold the liftgate hinge to the vehicle. With help raise the liftgate off the vehicle while you disconnect bolts between the hinges and liftgate. You should install the new liftgate hinges by setting them exactly at the vehicle location marks then bolt them to the liftgate and tighten the nuts to 25 N.m (20 lb ft). A partner holds the liftgate while you connect the vehicle mounting nuts before slamming the access doors in the header trim panel and fitting the liftgate support rods to the upper holder stud. Reconnect two electrical connectors at the upper left corner then install the grommet while placing the liftgate support. Afterward, link the electrical connector and washer hose at the upper right corner and set the grommet there before returning the liftgate to its place.

OEM Cadillac SRX Liftgate Hinge

Luggage Compartment Door Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Liftgate Hinges found

View related parts
Cadillac SRX Hinge, Passenger Side Part Number: 25771997
Product Specifications
- Other Name: Hinge Assembly-Lift Gate (Lift Gate Side); Liftgate Hinge; Door Hinge; Hinge, Rear Compartment Lid
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
Cadillac SRX Hinge, Driver Side Part Number: 25771996
Product Specifications
- Other Name: Hinge Assembly-Lift Gate (Lift Gate Side); Liftgate Hinge; Door Hinge; Hinge, Rear Compartment Lid
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
Cadillac SRX Hinge Part Number: 20824425
$66.21 MSRP: $98.55
You Save: $32.34 (33%)
Product Specifications
- Other Name: Liftgate Hinge; Door Hinge; Hinge, Rear Compartment Lid And End Gate
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2016 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS

Cadillac SRX Liftgate Hinge

Want to cut long-term maintenance and repair costs? Choose OEM Liftgate Hinge. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Cadillac SRX parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Cadillac SRX Liftgate Hinge includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Cadillac SRX Liftgate Hinge exists as a vital element which improves Cadillac SRX safety features while providing superior functionality to its recognized midsize luxury SUV model. The essential part enables smooth rear storage compartment operation so drivers can easily retrieve tools or luggage and maintains a strong liftgate support when doors are open. Over time exposure and normal wear degrade the Cadillac SRX Liftgate Hinge thus replacement at the right time becomes essential for effective operation of the vehicle. The various designs of Liftgate Hinges applied in Cadillac SRX models require matching the specific requirements of each vehicle's weight characteristics and structure. Selection of replacement parts for the Cadillac SRX must use the specific model information consisting of year and make along with model number plus trim level. The car Liftgate Hinge captivates the market because its durable construction along with user-friendly installation enhances vehicle safety and performance. The car Liftgate Hinge maintains reliability standards that elevate user fulfillment and intensifies vehicle durability which positions it as an essential component of the automaker model models.

Cadillac SRX Liftgate Hinge Parts and Q&A

Hinge, Passenger Side
25771997
Q: How to replace the liftgate hinges on Cadillac SRX?
A:
Mark the position of the liftgate hinges with a grease pencil before you open the liftgate to start replacing them. Take off the upper right vehicle body grommet, disconnect its electrical connector and washer hose before doing the same on the upper left side and disconnecting both electrical connectors. Keep the liftgate open while disconnecting its assist rods from the top ball studs. Open the access panel doors in the header trim panel and take off the nuts that hold the liftgate hinge to the vehicle. With help raise the liftgate off the vehicle while you disconnect bolts between the hinges and liftgate. You should install the new liftgate hinges by setting them exactly at the vehicle location marks then bolt them to the liftgate and tighten the nuts to 25 N.m (20 lb ft). A partner holds the liftgate while you connect the vehicle mounting nuts before slamming the access doors in the header trim panel and fitting the liftgate support rods to the upper holder stud. Reconnect two electrical connectors at the upper left corner then install the grommet while placing the liftgate support. Afterward, link the electrical connector and washer hose at the upper right corner and set the grommet there before returning the liftgate to its place.