To replace the headlamp bulb, the front grille has to be removed followed by removing the headlamp retainer pins, after which the headlamp assembly can be exerted to reach the electrical connector and disconnect it. Then, remove the rubber cup to access the headlamp bulbs and pull out the bulbs. When fitting the new bulbs, remember to replace a high beam bulb with another high beam bulb which has a red gasket and the low beam bulb another low beam bulb that has a gray tip and yellow gasket on its base. Place rubber cup back, reconnect the electrical connector to the lamp assembly, reinstall the lamp assembly into the vehicle, and secure headlamp assembly with the retainer pins, and finally reinstall the front grille.