How to replace the lower intermediate steering shaft on Cadillac Escalade EXT?

Begin lower intermediate Steering Shaft replacement by setting front wheels to straight ahead positions while locking the Steering Column to avoid sir coil assembly damage. The Steering Column anti-rotation pin (J 42640) goes into the Steering Column lower access hole and allows you to mark down all necessary intermediate shaft positions before actual installation. Start by disassembling the shaft with initial removal of the upper and lower shaft bolt and then taking away the lower shaft coupler bolt to slide the intermediate shaft assembly towards the dash until the lower shaft coupler clears the steering gear input shaft. First re-fit the lower end of the intermediate shaft into the lower shaft coupler and the upper end of the intermediate shaft into the upper shaft. Maintain the alignment between the noted marks if you plan to use the same shaft. Apply torque of 47 nm (35 ft. Lbs.) through installation of the lower intermediate shaft coupler onto the steering worm shaft followed by tightening the bolt of the lower coupler and upper shaft to 47 nm (35 ft. Lbs.) while securing the pinch bolt to the same torque value. Remove the Steering Column anti-rotation pin (J 42640) from the lower access hole of the Steering Column.

OEM Cadillac Escalade EXT Steering Shaft

Steering Stem Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Steering Shafts found

View related parts
Cadillac Escalade EXT Intermediate Shaft Part Number: 84370714
$107.27 MSRP: $184.22
You Save: $76.95 (42%)
ADD TO CART
Product Specifications
- Other Name: Shaft, Steering Column Intermediate; Steering Shaft; Lower Shaft; Upper Shaft; Intermed Shaft; Coupling
- Position: Upper
- Replaced by: 85104192
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2013 Cadillac Escalade EXT | Base, Luxury, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade EXT Coupling Shaft Part Number: 25958109
$171.69 MSRP: $282.83
You Save: $111.14 (40%)
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Steering Gear Coupling; Steering Shaft; Lower Shaft; Coupling; Shaft, Steering Column Intermediate; Shaft, Steering Column
- Replaced by: 85104193
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Cadillac Escalade EXT | Base | 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade EXT Coupling Shaft Part Number: 19420043
$500.09 MSRP: $823.81
You Save: $323.72 (40%)
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly, Steering Gear Coupling; Lower Shaft; Coupling; Shaft, Steering Column Intermediate; Shaft, Steering Column
- Replaces: 25862789, 15186859, 25979051
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2013 Cadillac Escalade EXT | Base, Luxury, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade EXT Steering Shaft Part Number: 26090770
Product Specifications
- Other Name: Shaft Assembly, Steering; Lower Shaft; Shaft, Steering Column
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Cadillac Escalade EXT | Base | 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade EXT Steering Shaft, Lower Part Number: 26083370
Product Specifications
- Other Name: Shaft, Lower Steering; Lower Shaft; Shaft, Steering Column
- Position: Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002 Cadillac Escalade EXT | Base | 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade EXT Steering Shaft Part Number: 19329330
$95.65 MSRP: $149.83
You Save: $54.18 (37%)
Product Specifications
- Other Name: Shaft, Steering Column Intermediate; Intermediate Shaft; Intermed Shaft
- Position: Upper
- Replaces: 26049343, 26088325, 26104449, 26083324, 26085548, 19149105, 26104447, 88965505, 89060582, 26093694, 88963611, 19153614
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Cadillac Escalade EXT | Base | 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade EXT Steering Shaft Part Number: 26064247
Product Specifications
- Other Name: Shaft, Steering Column; Shaft Assembly; Upper Shaft; Shaft
- Position: Upper
- Replaces: 26036514
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002 Cadillac Escalade EXT | Base | 8 Cyl 6.0 L GAS

Cadillac Escalade EXT Steering Shaft

Want to cut long-term maintenance and repair costs? Choose OEM Steering Shaft. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Cadillac Escalade EXT parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Cadillac Escalade EXT Steering Shaft includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Cadillac Escalade EXT Steering Shaft Parts and Q&A

Steering Shaft
19329330
Q: How to replace the lower intermediate steering shaft on Cadillac Escalade EXT?
A:
Begin lower intermediate Steering Shaft replacement by setting front wheels to straight ahead positions while locking the Steering Column to avoid sir coil assembly damage. The Steering Column anti-rotation pin (J 42640) goes into the Steering Column lower access hole and allows you to mark down all necessary intermediate shaft positions before actual installation. Start by disassembling the shaft with initial removal of the upper and lower shaft bolt and then taking away the lower shaft coupler bolt to slide the intermediate shaft assembly towards the dash until the lower shaft coupler clears the steering gear input shaft. First re-fit the lower end of the intermediate shaft into the lower shaft coupler and the upper end of the intermediate shaft into the upper shaft. Maintain the alignment between the noted marks if you plan to use the same shaft. Apply torque of 47 nm (35 ft. Lbs.) through installation of the lower intermediate shaft coupler onto the steering worm shaft followed by tightening the bolt of the lower coupler and upper shaft to 47 nm (35 ft. Lbs.) while securing the pinch bolt to the same torque value. Remove the Steering Column anti-rotation pin (J 42640) from the lower access hole of the Steering Column.