How to replace the lower control arm bushings on Cadillac Catera?

To change the Control Arm bushings, first position the vehicle with jack stands on the opposite side of where parts are being removed to minimize any potential damage or risk of injury. Take the lower Control Arm off first. Press out the horizontal bushing by inserting the end of j 42092-1 and j 42092-2 into a specially designed hole and use j 21474-18, j 21474-5, j 42112-4 and j 21474-19 to remove thevertical bushing. Insert the j 21474-18, j 21474-5 and j 21474-19 to force the vertical bushing into the lower Control Arm until it is completely seated. Then, insert the j 42091-1 and j 42092-2 to drive the horizontal bushing into the lower Control Arm, followed by reassembly of the lower Control Arm.

How to service and repair the control arm bushing on Cadillac Eldorado?

To service and repair the Control Arm Bushing, start by lifting and supporting the vehicle and then dismount the tire and wheel assemblies. Then, pull off brake bracket retainer screw and remove the road sensing suspension position sensor and bracket from the shock tower. In order to replace the right side bushing, you may need to lower the exhaust system and heat shield. Mount a screw jack under the rear suspension support forward arm, then unscrew the forward arm nuts & bolts, tracking the brakes calipers, hoses & pipes movements to avoid getting damaged. Lower the forward arm down slowly almost 5 inches to achieve the necessary tool clearance and then push the bushing set (J21474-01) into the forward arm flanges. Coat the screw assembly (J21474-19) threads with high pressure lubricant and prevent screw assembly from damage that occur during the process and install the bushing set (J21474-01), bushing receiver (J21474-5), long nut (J21474-18), and screw assembly (J21474-19). Extract the bushing from the forward arm using the nut by tightening it. For installation, orient the new bushing on the forward arm by having the notches in the bushing flange align with the 12 o'clock and 6 o'clock positions from the outboard side, having the bushing drawn inward. Insert again the bushing set j21474-01, coat the threads of screw assembly j21474-19 with high pressure lubricant, and install the bushing set (J21474-01), bushing receiver (J21474-5), long nut (J21474-18) and screw assembly (J21474-19) to pull the bushing in the forward arm till the flange seats firmly. Check upper suspension support insulators positioning, then try to raise slowly suspension support aligning it with the body. Make sure the direction of the forward arm bolts is right with the nuts on the right and the cup-shaped washer should only be used on the left forward arm bolt. Mount the suspension support forward arm bolts, nuts and washers, and the upper mounting bolts in and insulators, then tighten the right side suspension support forward arm nut to 63 nm (46 ft. Lbs.), and the left side forward arm bolt to 102 nm (75 ft. Lbs.), and the upper mounting bolts to 102 nm (75 ft. Lbs.). Lastly take off the screw jacks bring back the heat shield exhaling system, reconnect the sink-road bushing place and bracket place back the brake bracket retainer screw, position the tire and wheel assemblies back on and lower the vehicle.

OEM Cadillac Control Arm Bushing

Suspension Arm Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

56 Control Arm Bushings found

View related parts
Cadillac Control Arm Bushing, Front Upper Part Number: 371793
$7.94 MSRP: $12.44
You Save: $4.50 (37%)
ADD TO CART
Product Specifications
- Other Name: Bushing Assembly-Front Upper Control Arm; Axle Pivot Bushing; Axle Beam Mount; Upper Control Arm Bushing; Upper Bushing; Bushing; Bushings; Bushing, Steering Knuckle Upper Control Arm
- Position: Front Upper
- Replaced by: 14020223
Fits the following Cadillac Models:
- Brougham | 1992 | Base, d'Elegance | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- DeVille | 1984 | Base, Cabriolet, d'Elegance | 8 Cyl 4.1 L GAS, 8 Cyl 5.7 L DIESEL
- Fleetwood | 1993-1996, 1990, 1984 | 60 Special, Base, Brougham, Brougham d'Elegance, Formal | 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
View More
View related parts
Cadillac Lower Control Arm Bushing, Front Part Number: 15687205
$26.25 MSRP: $41.70
You Save: $15.45 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Front Lower Control Arm; Control Arm Bushing; Axle Pivot Bushing; Lower Control Arm Front Bushing; Bushings; Bushing, Steering Knuckle Lower Control Arm
- Position: Front Lower
Fits the following Cadillac Models:
- Escalade | 1999 | Base | 8 Cyl 5.7 L GAS
View related parts
Cadillac Control Arm Bushing, Lower Part Number: 351286
$13.11
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing Assembly-Front Lower Control Arm; Axle Pivot Bushing; Lower Control Arm Bushing; Front Bushing; Lower Bushing; Steering Knuckle Bushing.
- Position: Lower
Fits the following Cadillac Models:
- Brougham | 1992 | Base, d'Elegance | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- DeVille | 1984 | Base, Cabriolet, d'Elegance | 8 Cyl 4.1 L GAS, 8 Cyl 5.7 L DIESEL
- Fleetwood | 1993-1996, 1990, 1984 | 60 Special, Base, Brougham, Brougham d'Elegance | 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View More
View related parts
Cadillac Axle Bushing, Green, Rear Part Number: 10150338
$17.48 MSRP: $35.74
You Save: $18.26 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Rear Axle Control Arm; Axle Support Bushing; Crossmember Bushing; Axle Pivot Bushing; Axle Beam Mount; Axle Beam Bushing; Bushing
- Position: Rear
Fits the following Cadillac Models:
- Cimarron | 1984-1988 | Base, d'Oro | 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
View related parts
Cadillac Lower Control Arm Bushing, Rear Upper Part Number: 527593
$30.39 MSRP: $77.41
You Save: $47.02 (61%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing Assembly-Rear Axle Upper Control Arm; Suspension Control Arm Bushing; Axle Support Bushing; Axle Beam Mount.; Bushing, Rear Axle Control Arm
- Position: Rear Upper
Fits the following Cadillac Models:
- Fleetwood | 1993-1994 | Base, Brougham | 8 Cyl 5.7 L GAS
View related parts
Cadillac Bushings Part Number: 15739983
$17.40 MSRP: $28.68
You Save: $11.28 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Steering Knuckle Arm; Bushing, Steering Knuckle King Pinion
- Replaces: 15522033
Fits the following Cadillac Models:
- Escalade | 1999-2000 | Base | 8 Cyl 5.7 L GAS
View related parts
Cadillac Control Arm Bushing, Upper Part Number: 14020223
$7.94 MSRP: $12.44
You Save: $4.50 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Steering Knuckle Upper Control Arm; Suspension Control Arm Bushing; Axle Pivot Bushing; Axle Beam Mount; Upper Control Arm Bushing; Upper Bushing; Control Arm Bushings; Upper Control Arm Shaft Bushing.
- Position: Upper
- Replaces: 00371793, 371793
Fits the following Cadillac Models:
- Brougham | 1992 | Base, d'Elegance | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- DeVille | 1984 | Base, Cabriolet, d'Elegance | 8 Cyl 4.1 L GAS, 8 Cyl 5.7 L DIESEL
- Fleetwood | 1993-1996, 1990, 1984 | 60 Special, Base, Brougham, Brougham d'Elegance, Formal | 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
View More
View related parts
Cadillac Lower Control Arm Rear Bushing Part Number: 22934679
$26.70 MSRP: $42.37
You Save: $15.67 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Rear Axle Control Arm; Axle Support; Control Arm; Crossmember; Pivot; Beam Mount; Suspension Crossmember Rear Bushing
- Position: Rear
- Replaces: 20910699
Fits the following Cadillac Models:
- XTS | 2013-2019 | Base, Livery, Luxury, Platinum, Premium, Premium Luxury, Vsport Platinum, Vsport Premium, Vsport Premium Luxury | 6 Cyl 3.6 L GAS
View related parts
Cadillac Crossmember Bushing, Rear Part Number: 20755812
$34.30 MSRP: $56.50
You Save: $22.20 (40%)
ADD TO CART
Product Specifications
- Other Name: Bushing, Rear Axle Control Arm; Axle Support Bushing; Control Arm Bushing; Axle Pivot Bushing; Axle Beam Mount; Suspension Crossmember Lower Bushing; Steering Knuckle Lower Control Arm Bushing.
- Position: Rear
Fits the following Cadillac Models:
- ATS | 2013-2017 | Base, Luxury, Performance, Premium, Premium Luxury, Premium Performance | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
- CT4 | 2020-2024 | Luxury, Premium Luxury, Sport, V | 4 Cyl 2.0 L GAS, 4 Cyl 2.7 L GAS
- CT5 | 2020-2024 | Luxury, Premium Luxury, Sport, V, V Blackwing | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS, 8 Cyl 6.2 L GAS
- CTS | 2014-2019 | Base, Luxury, Performance, Premium, Premium Luxury, V, Vsport, Vsport Premium, Vsport Premium Luxury | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View More
View related parts
Cadillac Bushing Insulator, Blue, Lower Part Number: 22528801
Product Specifications
- Other Name: Insulator, Steering Knuckle Lower Control Arm; Control Arm Bushing; Axle Pivot Bushing; Lower Control Arm Front Bushing; Lower Control Arm Insulator; Insulator; Bushings
- Position: Lower
Fits the following Cadillac Models:
- Allante | 1987-1993 | Base, Indianapolis 500 Pace Car, Value Leader | 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 4.6 L GAS
- DeVille | 1994-1996 | Base, Concours, d'Elegance | 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
- Eldorado | 1986-1996 | Base, Biarritz, ETC, Sport, Spring Edition, Touring | 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
- Seville | 1986-1996 | Base, Elegante, SLS, STS | 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
View More
View related parts
Cadillac Control Arm Bushing, Front Lower Part Number: 14041609
Product Specifications
- Other Name: Bushing Assembly-Steering Knuckle Lower Control Arm Front; Suspension Control Arm Bushing; Axle Pivot Bushing; Lower Control Arm Bushing; Rear & Front Bushings; Steering Knuckle Bushing.
- Position: Front Lower
Fits the following Cadillac Models:
- Brougham | 1992 | Base, d'Elegance | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- DeVille | 1984 | Base, Cabriolet, d'Elegance | 8 Cyl 4.1 L GAS, 8 Cyl 5.7 L DIESEL
- Fleetwood | 1993-1996, 1990, 1984 | 60 Special, Base, Brougham, Brougham d'Elegance | 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View More
View related parts
Cadillac Outer Bushing, Rear Part Number: 13239621
Product Specifications
- Other Name: Bushing, Rear Axle Control Arm; Control Arm Bushing; Inner Bushing; Rear Upper Control Arm Inner Bushing; Rear Upper Control Arm Outer Bushing
- Position: Rear
Fits the following Cadillac Models:
- XTS | 2013-2019 | Base, Livery, Luxury, Platinum, Premium, Premium Luxury, Vsport Platinum, Vsport Premium, Vsport Premium Luxury | 6 Cyl 3.6 L GAS
View related parts
Cadillac Lower Control Arm Bushing, Front Part Number: 15153953
Product Specifications
- Other Name: Bushing, Front Lower Control Arm; Suspension Control Arm Bushing; Control Arm Bushing; Axle Pivot Bushing; Lower Control Arm Rear Bushing; Bushings
- Position: Front Lower
Fits the following Cadillac Models:
- Escalade | 2002-2004 | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Cadillac Carrier Housing Bushing, Rear Part Number: 19121910
Product Specifications
- Other Name: Bushing, Rear Axle Control Arm
- Position: Rear
Fits the following Cadillac Models:
- STS | 2005-2011 | Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
Cadillac Lower Control Arm Bushing, Front Part Number: 15153952
Product Specifications
- Other Name: Bushing, Front Lower Control Arm; Suspension Control Arm Bushing Kit; Axle Pivot Bushing.; Lower Control Arm Rear Bushing; Lower Control Arm Front Bushing; Bushings; Bushing, Steering Knuckle Lower Control Arm
- Position: Front Lower
Fits the following Cadillac Models:
- Escalade | 2002-2006 | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Escalade ESV | 2003-2006 | Base | 8 Cyl 6.0 L GAS
- Escalade EXT | 2002-2006 | Base | 8 Cyl 6.0 L GAS
View More
View related parts
Cadillac Front Bushings, Rear Part Number: 20921465
Product Specifications
- Other Name: Bushing, Rear Axle Control Arm; Control Arm Bushing; Axle Beam Mount; Lower Control Arm Front Bushing; Rear Lower Control Arm Rear Bushing; Lower Control Arm Inner Bushing
- Position: Rear
Fits the following Cadillac Models:
- XTS | 2013-2019 | Base, Livery, Luxury, Platinum, Premium, Premium Luxury, Vsport Platinum, Vsport Premium, Vsport Premium Luxury | 6 Cyl 3.6 L GAS
View related parts
Cadillac Control Arm Bushing, Rear Part Number: 1627757
Product Specifications
- Other Name: Bushing, Rear Suspension Support; Axle Support; Crossmember; Pivot; Sway Bar; Beam Mount; Stabilizer Link Bushing; Insulator; Shaft; Support; Suspension Crossmember; Bar Insulator; Rear Axle Control Arm
- Position: Rear
Fits the following Cadillac Models:
- Allante | 1993 | Base, Indianapolis 500 Pace Car, Value Leader | 8 Cyl 4.6 L GAS
- DeVille | 1994-1999 | Base, Concours, d'Elegance | 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
- Eldorado | 1986-2002 | Base, Biarritz, ESC, ETC, Sport, Spring Edition, Touring | 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
- Seville | 1986-1997 | Base, Elegante, SLS, STS | 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
View More
View related parts
Cadillac Lower Control Arm Bushing, Front Part Number: 15939601
Product Specifications
- Other Name: Bushing Assembly-Front Lower Control Arm; Control Arm Bushing; Axle Pivot Bushing; Bushings; Bushing, Steering Knuckle Lower Control Arm
- Position: Front Lower
Fits the following Cadillac Models:
- DTS | 2006-2011 | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
Cadillac Lower Control Arm Front Bushing, Blue Part Number: 22528799
$14.57 MSRP: $22.83
You Save: $8.26 (37%)
Product Specifications
- Other Name: Insulator, Steering Knuckle Lower Control Arm; Control Arm Bushing; Axle Pivot Bushing; Lower Control Arm Insulator; Insulator; Bushings
- Position: Lower
Fits the following Cadillac Models:
- Allante | 1987-1992 | Base, Value Leader | 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS
- DeVille | 1994-1996 | Base, Concours, d'Elegance | 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
- Eldorado | 1986-1996 | Base, Biarritz, ETC, Sport, Spring Edition, Touring | 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
- Seville | 1986-1996 | Base, Elegante, SLS, STS | 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
View More
View related parts
Cadillac Lower Control Arm Rear Bushing, Front Part Number: 15990218
Product Specifications
- Other Name: Bushing, Front Lower Control Arm; Control Arm Bushing; Axle Pivot Bushing; Bushings; Bushing, Steering Knuckle Lower Control Arm
- Position: Front Lower
Fits the following Cadillac Models:
- Escalade | 1999-2000 | Base | 8 Cyl 5.7 L GAS

| Page 1 of 3 |Next >

1-20 of 56 Results

Cadillac Control Arm Bushing

Choose OEM Control Arm Bushing, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Cadillac's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Cadillac Control Arm Bushing. You can shop at highly competitive prices and protect your budget. All our genuine Cadillac parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Cadillac Control Arm Bushing Parts and Q&A

Lower Control Arm Bushing
90576775
Q: How to replace the lower control arm bushings on Cadillac Catera?
A:
To change the Control Arm bushings, first position the vehicle with jack stands on the opposite side of where parts are being removed to minimize any potential damage or risk of injury. Take the lower Control Arm off first. Press out the horizontal bushing by inserting the end of j 42092-1 and j 42092-2 into a specially designed hole and use j 21474-18, j 21474-5, j 42112-4 and j 21474-19 to remove thevertical bushing. Insert the j 21474-18, j 21474-5 and j 21474-19 to force the vertical bushing into the lower Control Arm until it is completely seated. Then, insert the j 42091-1 and j 42092-2 to drive the horizontal bushing into the lower Control Arm, followed by reassembly of the lower Control Arm.
Control Arm Bushing, Rear
1627757
Q: How to service and repair the control arm bushing on Cadillac Eldorado?
A:
To service and repair the Control Arm Bushing, start by lifting and supporting the vehicle and then dismount the tire and wheel assemblies. Then, pull off brake bracket retainer screw and remove the road sensing suspension position sensor and bracket from the shock tower. In order to replace the right side bushing, you may need to lower the exhaust system and heat shield. Mount a screw jack under the rear suspension support forward arm, then unscrew the forward arm nuts & bolts, tracking the brakes calipers, hoses & pipes movements to avoid getting damaged. Lower the forward arm down slowly almost 5 inches to achieve the necessary tool clearance and then push the bushing set (J21474-01) into the forward arm flanges. Coat the screw assembly (J21474-19) threads with high pressure lubricant and prevent screw assembly from damage that occur during the process and install the bushing set (J21474-01), bushing receiver (J21474-5), long nut (J21474-18), and screw assembly (J21474-19). Extract the bushing from the forward arm using the nut by tightening it. For installation, orient the new bushing on the forward arm by having the notches in the bushing flange align with the 12 o'clock and 6 o'clock positions from the outboard side, having the bushing drawn inward. Insert again the bushing set j21474-01, coat the threads of screw assembly j21474-19 with high pressure lubricant, and install the bushing set (J21474-01), bushing receiver (J21474-5), long nut (J21474-18) and screw assembly (J21474-19) to pull the bushing in the forward arm till the flange seats firmly. Check upper suspension support insulators positioning, then try to raise slowly suspension support aligning it with the body. Make sure the direction of the forward arm bolts is right with the nuts on the right and the cup-shaped washer should only be used on the left forward arm bolt. Mount the suspension support forward arm bolts, nuts and washers, and the upper mounting bolts in and insulators, then tighten the right side suspension support forward arm nut to 63 nm (46 ft. Lbs.), and the left side forward arm bolt to 102 nm (75 ft. Lbs.), and the upper mounting bolts to 102 nm (75 ft. Lbs.). Lastly take off the screw jacks bring back the heat shield exhaling system, reconnect the sink-road bushing place and bracket place back the brake bracket retainer screw, position the tire and wheel assemblies back on and lower the vehicle.