How to service and repair the ignition coil on Buick Rendezvous?

In order to service and repair the Ignition Coil, remove the Spark Plug Wires, not forgetting their positions. Next, you should then unlock the 2 screws holding Ignition Coil to the Ignition Control Module and take off the Ignition Coil. For installation, install Ignition Coil to position and attach it by 2 attaching screws and tighten it to 4.5 n.m (40 lb in) refer the fastener notice of service precautions. Finally, join the Spark Plug Wires.

How to replace the ignition coil on Buick Rendezvous?

The Ignition Coil replacement process begins by removing the Intake Manifold cover then detaching the Brake Booster Vacuum Hose at the Intake Manifold. Begin by removing the Ignition Coil's two connectors: engine harness electrical connector and Spark Plug Wires (2, 4 and 6 and 1, 3 and 5). The Ignition Coil procedure begins with removing the engine harness clip along with the heated oxygen sensor (HO2S) clip from the Ignition Coil bracket. Then tighten the Ignition Coil bolts/nuts before extracting the Ignition Coil. Remove the Ignition Coil studs only when needed. The installation requires the Ignition Coil studs to be fitted before securing them with a torque of 25 n.m (18 lb ft). The installation requires fitting of the Ignition Coil followed by securing it with its bolts/nuts which should be tightened to 25 n.m (18 lb ft). Reinstall the ho2s and engine harness clips on the Ignition Coil bracket followed by connecting the Spark Plug Wires (1,3,5) then (2,4,6) to the Ignition Coil. Attaching the engine harness electrical connector and Brake Booster Vacuum Hose to the Intake Manifold completes the process for reinstalling the Intake Manifold cover.

OEM Buick Rendezvous Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Ignition Coils found

View related parts
Buick Rendezvous Spark Plug Part Number: 19418102
$83.97 MSRP: $172.56
You Save: $88.59 (52%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Coil Assembly, Ignition; Ignition Coil; Coil, Ignition Coil
- Replaces: 12583514, 12613057, 12629037
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2006 Buick Rendezvous | CX, CXL, CXL Plus, Ultra | 6 Cyl 3.6 L GAS
View related parts
Buick Rendezvous Ignition Coil Part Number: 19432144
$104.03 MSRP: $185.76
You Save: $81.73 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assembly, Ignition; Ignition Module; Coil, Ignition Coil
- Replaces: 12587153, 12595088, 12568185
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Buick Rendezvous | CX, CXL | 6 Cyl 3.5 L GAS
View related parts
Buick Rendezvous Ignition Coil Part Number: 19418991
$52.41 MSRP: $107.70
You Save: $55.29 (52%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Coil Assembly, Ignition; Coil Assembly; Coil; Coil, Ignition Coil
- Replaces: 10472401, 10482928, 19353734
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS

Buick Rendezvous Ignition Coil

Want to cut long-term maintenance and repair costs? Choose OEM Ignition Coil. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick Rendezvous parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick Rendezvous Ignition Coil includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Buick Rendezvous Ignition Coil is an essential part that points to the steadiness and power of the Buick Rendezvous which is a mid-size crossover SUV that was manufactured between 2002 and 2007. It is the function of this Ignition Coil to transform a low voltage from the battery to high voltage required in the ignition of air/fuel mixture in the cylinders of the engine to enable efficiency. The Buick Rendezvous possesses a powerful V6 engine; thus, the Ignition Coil significantly affects the engine's performance, fuel economy, and, most importantly, safety. It fits virtually all models of Rendezvous and is cut out for each model depending on whether it has a distributor or a coil-on-plug system. The function of the Buick Rendezvous Ignition Coil is the elimination of frequent troubles like difficult starting of the engine or rough running, which makes the significance of the part's maintenance a primary factor. Moreover, Ignition Coil- being built with some sturdy material and commonly encased in a plastic or epoxy shell- further increases its lifetime and dependability- something that differentiates it from the other automotive elements. As a clearly built luxury vehicle for daily use with sophisticated engineering technology, the Buick Rendezvous by a quality Ignition Coil is still popular among many families seeking comfort and excellent performance from their automobiles. In conclusion, Buick Rendezvous Ignition Coil is one of the major accessaries that make this model to be up to the expectation of the current drivers and hence maintains this spectacular brand of SUVs.

Buick Rendezvous Ignition Coil Parts and Q&A

Ignition Coil
19418991
Q: How to service and repair the ignition coil on Buick Rendezvous?
A:
In order to service and repair the Ignition Coil, remove the Spark Plug Wires, not forgetting their positions. Next, you should then unlock the 2 screws holding Ignition Coil to the Ignition Control Module and take off the Ignition Coil. For installation, install Ignition Coil to position and attach it by 2 attaching screws and tighten it to 4.5 n.m (40 lb in) refer the fastener notice of service precautions. Finally, join the Spark Plug Wires.
Ignition Coil
19432144
Q: How to replace the ignition coil on Buick Rendezvous?
A:
The Ignition Coil replacement process begins by removing the Intake Manifold cover then detaching the Brake Booster Vacuum Hose at the Intake Manifold. Begin by removing the Ignition Coil's two connectors: engine harness electrical connector and Spark Plug Wires (2, 4 and 6 and 1, 3 and 5). The Ignition Coil procedure begins with removing the engine harness clip along with the heated oxygen sensor (HO2S) clip from the Ignition Coil bracket. Then tighten the Ignition Coil bolts/nuts before extracting the Ignition Coil. Remove the Ignition Coil studs only when needed. The installation requires the Ignition Coil studs to be fitted before securing them with a torque of 25 n.m (18 lb ft). The installation requires fitting of the Ignition Coil followed by securing it with its bolts/nuts which should be tightened to 25 n.m (18 lb ft). Reinstall the ho2s and engine harness clips on the Ignition Coil bracket followed by connecting the Spark Plug Wires (1,3,5) then (2,4,6) to the Ignition Coil. Attaching the engine harness electrical connector and Brake Booster Vacuum Hose to the Intake Manifold completes the process for reinstalling the Intake Manifold cover.