How to service and repair the Pushrod on Buick LeSabre?

Service or repair of the push rod begins by first removing both the left valve Rocker Arm cover and then the right valve Rocker Arm cover. Remove the valve Rocker Arm pedestal retaining bolts before taking out the pedestal which should be placed on a clean surface for safe storage. Start by removing the Rocker Arm assembly with all pushrods intact. Then clean the valve rocker arms and pushrods as well as pedestal bolts in suitable solutions while checking for any signs of wear. Remove all thread adhesive from the bolts prior to their installation. You require the torque angle meter (J 36660-A) when performing this operation. The technician must start assembly by installing the pushrods and valve Rocker Arm assembly followed by the pedestal. The threads of the valve Rocker Arm bolts need gm p/n 12345493 threadlocker compound or equivalent before you install the valve Rocker Arm pedestal retaining bolts. Seal the valve Rocker Arm bolts by tightening them to 15 nm (11 ft. Lbs.) + 90 degrees while using a torque angle meter (J 36660-A). During the last step of installation place on both the left and right valve Rocker Arm covers while listening for any valve train sounds.

How to service and repair the Pushrod on Buick Regal?

Your first step to repair the push rod starts with removing the valve Rocker Arm covers and the Rocker Arm bolts and setting aside each part on a clean area until reinstallation. Begin service by taking off the valve Rocker Arm(s) followed by the push rod guide plate(s) when all rocker arms are removed before placing the push rods(s). Clean all push rods and valve rocker arms and guide plates and bolts in a suitable solution while ensuring all valve Rocker Arm bolts have no remaining thread adhesive. The installation process requires the electronic torque angle meter (J36660-A) to use compressed air for blowing oil out of the Cylinder Head tapped holes. Clean engine oil should be applied to both ends of push rod(s) before their installation into their original positions which should be followed by push rod guide plate(s) and valve Rocker Arm(s). The threadlocker gm p/n 12345493 or an equivalent product should be applied to the Rocker Arm bolt threads before installing the valve Rocker Arm bolts with j36660-a tool usage. Tighten the bolts to 15 nm (11 ft. Lbs.) before using the j36660-a to rotate them by another 90 degrees. As the last step install the valve Rocker Arm cover(s) before inspecting the valve train for any unwanted sounds.

OEM Buick Pushrod

Valve Push Rod

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

28 Pushrods found

View related parts
Buick Push Rods Part Number: 14095256
$16.83 MSRP: $26.37
You Save: $9.54 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod, Engine Valve Push Rod; Pushrod; Rod, Engine Valve Push
Fits the following Buick Models:
- Regal | 1986-1987, 1984 | Base, Grand National, Limited, T-Type | 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS
View related parts
Buick Push Rods Part Number: 10238852
$18.77 MSRP: $30.90
You Save: $12.13 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod, Valve Push; Pushrod; Rod, Engine Valve Push Rod
Fits the following Buick Models:
- LaCrosse | 2008-2009 | Super | 8 Cyl 5.3 L GAS
- Rainier | 2004-2007 | CXL, CXL Plus | 8 Cyl 5.3 L GAS
View related parts
Buick Push Rods Part Number: 12577693
$15.43 MSRP: $25.42
You Save: $9.99 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod, Engine Valve Push Rod; Pushrod
Fits the following Buick Models:
- Lucerne | 2009-2011 | CX, CXL, CXL Special Edition | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
- Terraza | 2006-2007 | CX, CXL | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Buick Push Rods Part Number: 12577692
$9.82 MSRP: $15.39
You Save: $5.57 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod, Engine Valve Push Rod; Pushrod
Fits the following Buick Models:
- Lucerne | 2009-2011 | CX, CXL, CXL Special Edition | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
- Terraza | 2006-2007 | CX, CXL | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Buick Push Rods Part Number: 10241740
$14.96 MSRP: $23.75
You Save: $8.79 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod, Engine Valve Push Rod; Pushrod
Fits the following Buick Models:
- Roadmaster | 1996 | Collector's Edition, Estate Wagon Collector's Edition, Limited Collector's Edition | 8 Cyl 5.7 L GAS
View related parts
Buick Push Rods Part Number: 10040235
$13.11
ADD TO CART
Product Specifications
- Other Name: Rod, Engine Valve Push Rod; Pushrod
Fits the following Buick Models:
- Century | 1987-1992 | Custom, Estate Wagon, Limited, Special | 4 Cyl 2.5 L GAS
- Skylark | 1987-1991 | Base, Custom, Gran Sport, Limited, Luxury Edition | 4 Cyl 2.5 L GAS
- Somerset | 1987 | Custom, Limited | 4 Cyl 2.5 L GAS
View More
View related parts
Buick Push Rods Part Number: 10046173
$12.10 MSRP: $19.20
You Save: $7.10 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod, Valve Push; Pushrod; Rod, Engine Valve Push Rod
Fits the following Buick Models:
- Roadmaster | 1991-1995 | Base, Estate Wagon, Limited | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Buick Push Rods Part Number: 24504406
$10.77 MSRP: $17.74
You Save: $6.97 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod, Engine Valve Push Rod; Pushrod
Fits the following Buick Models:
- LaCrosse | 2005-2009 | CX, CXL | 6 Cyl 3.8 L GAS
- LeSabre | 1995-2005 | Custom, Limited | 6 Cyl 3.8 L GAS
- Lucerne | 2006-2008 | CX, CXL | 6 Cyl 3.8 L GAS
- Park Avenue | 1995-2005 | Base, Ultra | 6 Cyl 3.8 L GAS
- Regal | 1996-2004 | 25th Anniversary Edition, Custom, Gran Sport, GS, GSE, Limited, LS, LSE, Olympic Gold Edition | 6 Cyl 3.8 L GAS
- Riviera | 1995-1999 | Base | 6 Cyl 3.8 L GAS
View More
View related parts
Buick Push Rods Part Number: 14102522
$13.11
ADD TO CART
Product Specifications
- Other Name: Rod Assembly-Inlet Push; Pushrod; Rod, Engine Valve Push Rod
Fits the following Buick Models:
- Century | 1987-1989 | Custom, Estate Wagon, Limited | 6 Cyl 2.8 L GAS
- Regal | 1988-1993 | Custom, Gran Sport, Limited | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
View related parts
Buick Push Rods Part Number: 10166355
$3.95 MSRP: $6.20
You Save: $2.25 (37%)
Product Specifications
- Other Name: Rod, Engine Valve Push Rod; Pushrod; Exhaust Push Rod
Fits the following Buick Models:
- Century | 1994-2005 | Custom, Limited, Special, Special Edition | 6 Cyl 3.1 L GAS
- Regal | 1994-2004 | 25th Anniversary Edition, Custom, GS, GSE, LS, LSE | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
- Rendezvous | 2002-2007 | CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
- Skylark | 1994-1998 | Custom, Gran Sport, Limited, Olympic Gold Edition | 6 Cyl 3.1 L GAS
- Terraza | 2005-2006 | CX, CXL | 6 Cyl 3.5 L GAS
View More
View related parts
Buick Push Rods Part Number: 10166354
$4.00 MSRP: $6.27
You Save: $2.27 (37%)
Product Specifications
- Other Name: Rod, Engine Valve Push Rod; Pushrod; Intake Push Rod
Fits the following Buick Models:
- Century | 1994-2005 | Custom, Limited, Special, Special Edition | 6 Cyl 3.1 L GAS
- Regal | 1994-2004 | 25th Anniversary Edition, Custom, GS, GSE, LS, LSE | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
- Rendezvous | 2002-2007 | CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
- Skylark | 1994-1998 | Custom, Gran Sport, Limited, Olympic Gold Edition | 6 Cyl 3.1 L GAS
- Terraza | 2005-2006 | CX, CXL | 6 Cyl 3.5 L GAS
View More
View related parts
Buick Push Rods Part Number: 10198813
Product Specifications
- Other Name: Rod, Valve Push; Pushrod; Rod, Engine Valve Push Rod
Fits the following Buick Models:
- Century | 1994-1996 | Custom, Limited, Special | 4 Cyl 2.2 L GAS
View related parts
Buick Push Rods Part Number: 22505582
Product Specifications
- Other Name: Pushrod
Fits the following Buick Models:
- Electra | 1984 | Estate Wagon, Limited, Park Avenue | 8 Cyl 5.0 L GAS
- LeSabre | 1984 | Custom, Limited | 8 Cyl 5.0 L GAS
- Riviera | 1984 | Base, Luxury | 8 Cyl 5.0 L GAS
View More
View related parts
Buick Push Rods Part Number: 22533631
Product Specifications
- Other Name: Rod, Engine Valve Push Rod; Pushrod
Fits the following Buick Models:
- Electra | 1989, 1985-1987 | Estate Wagon | 8 Cyl 5.0 L GAS
- LeSabre | 1985-1990 | Collector's Edition, Custom, Estate Wagon, Limited | 8 Cyl 5.0 L GAS
- Regal | 1986-1987 | Base, Limited | 8 Cyl 5.0 L GAS
View More
View related parts
Buick Valve Cover Gasket Part Number: 10028055
Product Specifications
- Other Name: Rod, Engine Valve Push Rod; Pushrod; Push Rods
Fits the following Buick Models:
- Century | 1985-1986 | Custom, Estate Wagon, Limited | 4 Cyl 2.5 L GAS
- Skylark | 1986 | Custom, Limited | 4 Cyl 2.5 L GAS
- Somerset | 1986 | Custom, Limited, T-Type | 4 Cyl 2.5 L GAS
- Somerset Regal | 1985 | Base, Limited | 4 Cyl 2.5 L GAS
View More
View related parts
Buick Push Rods Part Number: 14090057
Product Specifications
- Other Name: Rod, Engine Valve Push Rod; Pushrod
Fits the following Buick Models:
- Century | 1993 | Custom, Limited, Special | 4 Cyl 2.2 L GAS
- Skyhawk | 1987-1989 | Custom, Limited, SE, Sport, T-Type | 4 Cyl 2.0 L GAS
View related parts
Buick Push Rods Part Number: 25518766
Product Specifications
- Other Name: Rod, Engine Valve Push Rod; Pushrod
Fits the following Buick Models:
- LeSabre | 1986 | Custom, Limited | 6 Cyl 3.0 L GAS
- Skylark | 1986-1988 | Custom, Limited | 6 Cyl 3.0 L GAS
- Somerset | 1986-1987 | Custom, Limited, T-Type | 6 Cyl 3.0 L GAS
- Somerset Regal | 1985 | Base, Limited | 6 Cyl 3.0 L GAS
View More
View related parts
Buick Push Rods Part Number: 25524317
Product Specifications
- Other Name: Pushrod; Rod, Engine Valve Push Rod
Fits the following Buick Models:
- Century | 1986 | Custom, Estate Wagon, Limited, T-Type | 6 Cyl 3.8 L GAS
- Electra | 1986 | Limited, Park Avenue, T-Type | 6 Cyl 3.8 L GAS
- LeSabre | 1986 | Custom | 6 Cyl 3.8 L GAS
- Riviera | 1986 | Luxury, T-Type | 6 Cyl 3.8 L GAS
View More
View related parts
Buick Push Rods Part Number: 14018769
Product Specifications
- Other Name: Rod, Engine Valve Push Rod; Pushrod
Fits the following Buick Models:
- Skyhawk | 1984-1986 | Custom, Limited, Sport | 4 Cyl 2.0 L GAS
View related parts
Buick Push Rods Part Number: 24504923
Product Specifications
- Other Name: Rod, Engine Valve Push Rod; Pushrod
Fits the following Buick Models:
- Regal | 1993-1995 | Custom, Gran Sport, Limited | 6 Cyl 3.8 L GAS

| Page 1 of 2 |Next >

1-20 of 28 Results

Buick Pushrod

Choose OEM Pushrod, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Buick's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Buick Pushrod. You can shop at highly competitive prices and protect your budget. All our genuine Buick parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Buick Pushrod connects the cam motion to valves in order to have sharp combustion and solid steadfastness. Buick has been striking a balance between long-road comfort and a tradition of introducing new ideas with each generation since 1903. The drivers are aware that the cabins remain peaceful on account of silent tuning as the suspensions take the bumps like a boxer taking the punches of a heavyweight. The Wildcat EV concept of the company demonstrates that the style and electric punch may coexist under the same shaped badge without abandoning the traditional grille. Since time immemorial of these early touring cars to the modern day SULEV-rated sedans, the brand has upheld one thing: smooth ride, easy control, no fuss. Over decades Buick has remained the travel companion your grandparents could count on and your playlist now reflects. Heritage is good, but the logo continues to lean towards the future using lighter materials, more defined lines, and a constant wink at independence. Pushrod shafts within the V-shape engine block ride over cam lobes and rocker arms in an exact time valve lift of milliseconds, ensuring that the fuel and air mix perfectly and leave the engine without any drama, avoiding misfires, stems that are bent, and the wallet-shredding mayhem those failures create on the open road. A steel body that is hardened does not flex, oil paths inside the contacts are bathed and heat treatment enables the rod to disregard extreme RPM changes. With clearance drifts, audible tapping gives the driver plenty of time to intake full breathing authority before actual damage is inflicted. This Pushrod design is lightweight, compatible with established overhead valve designs, and provides high power at low revolutions in the rev range where daily traffic jam occurs.

Buick Pushrod Parts and Q&A

Push Rods
24504406
Q: How to service and repair the Pushrod on Buick LeSabre?
A:
Service or repair of the push rod begins by first removing both the left valve Rocker Arm cover and then the right valve Rocker Arm cover. Remove the valve Rocker Arm pedestal retaining bolts before taking out the pedestal which should be placed on a clean surface for safe storage. Start by removing the Rocker Arm assembly with all pushrods intact. Then clean the valve rocker arms and pushrods as well as pedestal bolts in suitable solutions while checking for any signs of wear. Remove all thread adhesive from the bolts prior to their installation. You require the torque angle meter (J 36660-A) when performing this operation. The technician must start assembly by installing the pushrods and valve Rocker Arm assembly followed by the pedestal. The threads of the valve Rocker Arm bolts need gm p/n 12345493 threadlocker compound or equivalent before you install the valve Rocker Arm pedestal retaining bolts. Seal the valve Rocker Arm bolts by tightening them to 15 nm (11 ft. Lbs.) + 90 degrees while using a torque angle meter (J 36660-A). During the last step of installation place on both the left and right valve Rocker Arm covers while listening for any valve train sounds.
Push Rods
10166355
Q: How to service and repair the Pushrod on Buick Regal?
A:
Your first step to repair the push rod starts with removing the valve Rocker Arm covers and the Rocker Arm bolts and setting aside each part on a clean area until reinstallation. Begin service by taking off the valve Rocker Arm(s) followed by the push rod guide plate(s) when all rocker arms are removed before placing the push rods(s). Clean all push rods and valve rocker arms and guide plates and bolts in a suitable solution while ensuring all valve Rocker Arm bolts have no remaining thread adhesive. The installation process requires the electronic torque angle meter (J36660-A) to use compressed air for blowing oil out of the Cylinder Head tapped holes. Clean engine oil should be applied to both ends of push rod(s) before their installation into their original positions which should be followed by push rod guide plate(s) and valve Rocker Arm(s). The threadlocker gm p/n 12345493 or an equivalent product should be applied to the Rocker Arm bolt threads before installing the valve Rocker Arm bolts with j36660-a tool usage. Tighten the bolts to 15 nm (11 ft. Lbs.) before using the j36660-a to rotate them by another 90 degrees. As the last step install the valve Rocker Arm cover(s) before inspecting the valve train for any unwanted sounds.