How to replace the inlet oil cooler hose on Buick Rendezvous?

To replace the oil cooler inlet line, empty the engine coolant from the cooling system and then lift and support the vehicle. Unplug the knock sensor electronic connector and take out the Oil Filter. Now, take off the hose connected to the oil cooler outlet and the oil cooler connector. Stop the hose clamp on the top of the oil cooler and get rid of the oil cooler, remove the hose clamp on the port then remove the Oil Cooler Hose from the oil cooler fitting on the hose. If necessary, remove the Oil Cooler Hose connection. For repair, if the Oil Cooler Hose fitting were to be removed, insert it and tighten to 19 nm (14ft. Lbs.). Secure the oil cooler hose with a hose clamp and ensure the oil cooler is properly seated. Install the oil cooler connector and fasten to 50 nm (37 ft. Lbs.), and connect the oil cooler outlet hose to the oil cooler. Replace the Oil Filter, reconnect the knock sensor electrical connector, drop the vehicle, and fill the cooling system with engine coolant. Top up on engine oil where needed and check the oil cooler for leaks.

OEM Buick Oil Cooler Hose

Oil Cooler Line

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

72 Oil Cooler Hoses found

View related parts
Buick Hose Part Number: 24504912
$10.55 MSRP: $18.83
You Save: $8.28 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose-Throttle Body Heater Inlet; Multi Purpose Hose; Cooling Hose; Hose, Throttle Body Coolant Supply; Hose, Engine Oil Cooler
Fits the following Buick Models:
- Rendezvous | 2002-2005 | CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS
View related parts
Buick Inlet Pipe Part Number: 12790785
$39.43 MSRP: $62.59
You Save: $23.16 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe, Engine Oil Cooler; Oil Cooler Assembly Tube
Fits the following Buick Models:
- Regal | 2011-2013 | CXL, GS, Premium | 4 Cyl 2.0 L FLEX
View related parts
Buick Oil Inlet Tube Part Number: 13394457
$40.45 MSRP: $68.86
You Save: $28.41 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe, Transmission Oil Cooler
Fits the following Buick Models:
- Cascada | 2016-2019 | Base, Premium, Sport Touring | 4 Cyl 1.6 L GAS
View related parts
Buick Cooler Line, Lower Part Number: 25660782
$28.45 MSRP: $46.86
You Save: $18.41 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Transmission Oil Cooler Lower; Transmission Oil Cooler Line; Cooler Pipe; Line; Pipe; Pipe, Transmission Oil Cooler
- Position: Lower
Fits the following Buick Models:
- LeSabre | 1997-1999, 1994-1995 | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick Inlet Pipe Part Number: 84350786
$22.65 MSRP: $37.90
You Save: $15.25 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Transmission Fluid Cooler; Transmission Oil Cooler Line; Cooler Pipe; Pipe, Transmission Oil Cooler
- Replaces: 23205070
Fits the following Buick Models:
- Enclave | 2018 | Avenir, Base, Essence, Premium | 6 Cyl 3.6 L GAS
View related parts
Buick Cooler Line Part Number: 60004634
$49.05 MSRP: $77.88
You Save: $28.83 (38%)
ADD TO CART
Product Specifications
- Other Name: Pipe, Transmission Oil Cooler; Hose & Tube Assembly; Line
- Replaces: 60009116
Fits the following Buick Models:
- Encore GX | 2020-2024 | Avenir, Essence, Preferred, Select, Sport Touring | 3 Cyl 1.3 L GAS
View related parts
Buick Hoses Part Number: 95443007
$83.63 MSRP: $132.79
You Save: $49.16 (38%)
ADD TO CART
Product Specifications
- Other Name: Pipe, Transmission Oil Cooler; Transmission Oil Cooler Hose; Transmission Oil Cooler Line
Fits the following Buick Models:
- Encore | 2016-2017 | Essence, Preferred II, Premium, Sport Touring | 4 Cyl 1.4 L GAS
View related parts
Buick Cooler Line Part Number: 10290000
$16.75 MSRP: $27.59
You Save: $10.84 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Transmission Oil Cooler; Transmission Oil Cooler Line; Lower Hose; Cooler Pipe
- Replaces: 10273667, 10248869
Fits the following Buick Models:
- Regal | 1991-1996 | Custom, Gran Sport, Limited, Olympic Gold Edition | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Connector Hose Part Number: 24295870
$12.25 MSRP: $20.17
You Save: $7.92 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Automatic Transmission Fluid Cooling Heat Exchanger; Transmission Oil Cooler Line; Inlet Hose; Hose, Transmission Oil Cooler
Fits the following Buick Models:
- Envision | 2021-2023 | Avenir, Essence, Preferred | 4 Cyl 2.0 L GAS
View related parts
Buick Cooler Pipe Part Number: 95090431
$30.30 MSRP: $49.91
You Save: $19.61 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe, Transmission Oil Cooler; Transmission Oil Cooler Hose; Transmission Oil Cooler Line; Line; Hoses
Fits the following Buick Models:
- Encore | 2013-2020 | Base, Convenience, Essence, Leather, Preferred, Preferred II, Premium, Sport Touring | 4 Cyl 1.4 L GAS
View related parts
Buick Inlet Hose Part Number: 60005756
$31.14 MSRP: $49.42
You Save: $18.28 (37%)
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Transmission Fluid Cooler Inlet; Line; Pipe, Transmission Oil Cooler
- Replaces: 60004635
Fits the following Buick Models:
- Encore GX | 2020-2024 | Essence, Preferred, Select | 3 Cyl 1.2 L GAS
View related parts
Buick Hoses Part Number: 24294041
$10.49 MSRP: $17.28
You Save: $6.79 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Automatic Transmission Fluid Cooling Heat Exchanger Ot; Transmission Oil Cooler Line; Hose, Transmission Oil Cooler
Fits the following Buick Models:
- Encore GX | 2020-2023 | Essence, Preferred, Select | 3 Cyl 1.2 L GAS, 3 Cyl 1.3 L GAS
View related parts
Buick Cooler Pipe Part Number: 13311082
$16.19 MSRP: $26.67
You Save: $10.48 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Pipe, Transmission Oil Cooler; Transmission Oil Cooler Line
Fits the following Buick Models:
- Verano | 2013-2016 | Premium, Turbo | 4 Cyl 2.0 L GAS
View related parts
Buick Cooler Pipe, Lower Part Number: 25624176
$21.16 MSRP: $34.85
You Save: $13.69 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Transmission Oil Cooler Lower; Transmission Oil Cooler Line; Line; Pipe; Pipe, Transmission Oil Cooler
- Position: Lower
Fits the following Buick Models:
- LeSabre | 1997 | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick Inlet Hose Part Number: 23249577
$37.35 MSRP: $59.31
You Save: $21.96 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Transmission Fluid Cooler Inlet; Line; Pipe, Transmission Oil Cooler
Fits the following Buick Models:
- Envision | 2016-2020 | Base, Essence, Preferred, Premium, Premium II | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
View related parts
Buick Inlet Hose Part Number: 55487351
$13.88 MSRP: $22.02
You Save: $8.14 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Engine Oil Cooler Coolant Inlet; Oil Cooler Hose; Hose, Engine Oil Cooler
Fits the following Buick Models:
- Envision | 2021 | Avenir, Essence, Preferred | 4 Cyl 2.0 L GAS
View related parts
Buick Oil Line Part Number: 12706072
$317.99 MSRP: $523.86
You Save: $205.87 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe, Engine Oil Cooler; Pipe Assembly; Oil Cooler Pipe; Pipe
Fits the following Buick Models:
- Encore GX | 2020-2024 | Avenir, Essence, Preferred, Select, Sport Touring | 3 Cyl 1.3 L GAS
View related parts
Buick Cooling Pipe Part Number: 25195782
$33.99 MSRP: $56.01
You Save: $22.02 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe, Engine Oil Cooler; Coolant Pipe
Fits the following Buick Models:
- Encore | 2013-2020 | Base, Convenience, Essence, Leather, Preferred, Preferred II, Premium, Sport Touring | 4 Cyl 1.4 L GAS
View related parts
Buick Hoses Part Number: 55501081
$5.96 MSRP: $9.33
You Save: $3.37 (37%)
ADD TO CART
Product Specifications
- Other Name: Hose-Engine Oil Cooler Coolant Inlet; Hose, Engine Oil Cooler
- Replaces: 55487841
Fits the following Buick Models:
- Envision | 2021 | Avenir, Essence, Preferred | 4 Cyl 2.0 L GAS
View related parts
Buick Cooler Pipe Part Number: 22952310
$41.03 MSRP: $64.23
You Save: $23.20 (37%)
Product Specifications
- Other Name: Pipe, Transmission Oil Cooler; Transmission Oil Cooler Line
Fits the following Buick Models:
- Verano | 2013-2016 | Premium, Turbo | 4 Cyl 2.0 L GAS

| Page 1 of 4 |Next >

1-20 of 72 Results

Buick Oil Cooler Hose

Choose OEM Oil Cooler Hose, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Buick's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Buick Oil Cooler Hose. You can shop at highly competitive prices and protect your budget. All our genuine Buick parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Buick Oil Cooler Hose is designed to sustain stable temperatures of engine oil that gives prolonged power and safety. Buick began making cars in 1903 and it did not take long to establish a reputation for smooth and confident drive. The company combines 100 years of tradition and technology such as quiet tuning that silences the sound of wind and bumps. Drivers observe the calmness of the cabin, reactive steering, and fashionable style without any trend but still appearing up to date. The Wildcat EV signals bold shapes and all-electric push without discomfort are some of the new ideas. Combining tradition with progressive thought, the badge provides families and commuters with something classy but not too prestigious. Quality is illustrated on the real world quiet roads and low warranty claims rather than flashy slogans. The range of products, starting with sedans up to crossovers, is designed to be a compromise between luxury pricing and cost-cutting. The long journeys appear to be relaxing as there is no problem with the seats and the cabin quietness. Oil Cooler Hose paths are passages carrying pressurized lubricant through the engine block to cooler fins and back, and dissipate heat rapidly, maintaining the appropriate viscosity level in city crawling, freeway bursts, and hot summer idling. Designed to conform in both engine and transmission circuit, exact diameter and length prevent swelling, abrasion, and leaks. Oil Cooler Hose is made of layered rubber with reinforced crimps that shrug off vibration. Proper fit ensures uniform pressure and prevents foaming and allows all violating actions to be sliding rather than scraping. The Buick engines have the lasting power of miles of work with this long-term line. No mixing of coolants, no untidy warnings on the dashboard.

Buick Oil Cooler Hose Parts and Q&A

Hose
24504912
Q: How to replace the inlet oil cooler hose on Buick Rendezvous?
A:
To replace the oil cooler inlet line, empty the engine coolant from the cooling system and then lift and support the vehicle. Unplug the knock sensor electronic connector and take out the Oil Filter. Now, take off the hose connected to the oil cooler outlet and the oil cooler connector. Stop the hose clamp on the top of the oil cooler and get rid of the oil cooler, remove the hose clamp on the port then remove the Oil Cooler Hose from the oil cooler fitting on the hose. If necessary, remove the Oil Cooler Hose connection. For repair, if the Oil Cooler Hose fitting were to be removed, insert it and tighten to 19 nm (14ft. Lbs.). Secure the oil cooler hose with a hose clamp and ensure the oil cooler is properly seated. Install the oil cooler connector and fasten to 50 nm (37 ft. Lbs.), and connect the oil cooler outlet hose to the oil cooler. Replace the Oil Filter, reconnect the knock sensor electrical connector, drop the vehicle, and fill the cooling system with engine coolant. Top up on engine oil where needed and check the oil cooler for leaks.