How to replace the Electric Cooling Fan Motor on Buick Regal?

The initial step of electric cooling Fan Motor replacement requires the maintenance of safety by staying away from the electric engine coolant fan system while the ignition remains in the on position. The first step requires disconnecting both the cooling fan assembly and cooling fan heat shields. Remove the cooling Fan Blade nut followed by the cooling Fan Blade and disconnect the cooling Fan Motor electrical connectors. Dangerous situations due to imbalance will arise if you continue using a bent or damaged Fan Blade so it needs immediate replacement. During inspection of the cooling fan verify that all blades are intact and probe the mating surfaces for smoothness settling all imperfections through burr removal. You need to dismantle the cooling Fan Motor by removing its bolts followed by extracting the motor itself. Place the cooling Fan Motor in its designated position before installing the cooling Fan Motor bolts and tightening them to 6 nm (53 inch lbs.). After securing the cooling Fan Blade with the blade nut users should tighten it to 6 nm (53 inch lbs.). Proceed by connecting the electrical connectors of the cooling Fan Motor and reinstalling the heat shields then reassemble the entire cooling fan assembly.

How to Service and Replace the Radiator Cooling Fan Motor on Buick LaCrosse?

The replacement of electric cooling Fan Motor ly7 starts with removing the Fan Shroud assembly from the vehicle. Warning should be taken because the electric fan operates spontaneously when the motor is off which creates potential hazards for users. Always check that the ignition key contains the off position or lock setting before you disconnect the negative Battery Cable to protect from live electrical terminals. The ge-47827 (GE-47827) socket enables you to turn the Fan Motor drive plate in an opposite direction to the Fan Blade arrow until complete disengagement. Prevent Fan Blade rotation by holding it securely in place. Regularly check that the cooling Fan Motor has no openings by securing them with tape and dispose of the Fan Blade. Utilize center punching and drilling with a 6.35 mm (0.25 inch) drill bit to remove Fan Motor rivets from their positions before tidying up by taping out the rivets from the Fan Shroud so you can eliminate the Fan Motor. Remove any loose debris afterward and eliminate all discarded tape from the entry points. Install the new engine cooling Fan Motor inside the Fan Shroud by inserting bolts from its front side until the cooling Fan Motor nuts reach 6 nm (53 inch lbs. Of torque). Before putting the new Fan Blade hub into place, heat it in hot tap water reaching at least 49°c (120°F) hot for sixty seconds to stop cracking from forming. Act swiftly to place the heated Fan Blade onto the Fan Motor drive plate through alignment of the ge-47827 (GE-47827) socket for turning the Fan Motor drive plate with arrow orientation on the Fan Blade. The vehicle requires reinstalling of the Fan Shroud assembly after properly rotating the cooling Fan Blade into position.

OEM Buick Fan Motor

Cooling Fan Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

50 Fan Motors found

View related parts
Buick Fan Motor Part Number: 22081940
$91.86 MSRP: $188.78
You Save: $96.92 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Package
- Replaced by: 22137318
Fits the following Buick Models:
- LeSabre | 1989 | Base, Custom, Limited | 6 Cyl 3.8 L GAS
- Reatta | 1989-1991 | Base | 6 Cyl 3.8 L GAS
- Riviera | 1989-1991 | Luxury, T-Type | 6 Cyl 3.8 L GAS
View More
View related parts
Buick Fan Blade Part Number: 22104439
$85.46 MSRP: $175.62
You Save: $90.16 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Motor; Radiator Fan Assembly; Motor; Motor Kit, Engine Air Cooling(Electrical)
Fits the following Buick Models:
- Riviera | 1992-1993 | Luxury | 6 Cyl 3.8 L GAS
View related parts
Buick Fan Motor Part Number: 22092352
$67.27 MSRP: $121.76
You Save: $54.49 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Kit
- Replaced by: 22134671
Fits the following Buick Models:
- Electra | 1990 | Limited, Park Avenue, Park Avenue Ultra, T-Type | 6 Cyl 3.8 L GAS
- LeSabre | 1990-1991 | Base, Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick Fan & Motor Part Number: 23270403
$307.87 MSRP: $578.17
You Save: $270.30 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor, Engine Air Cooling (Electrical); Radiator Fan Assembly; Motor, Engine Air Cooling(Electrical)
Fits the following Buick Models:
- Envision | 2016-2020 | Premium, Premium II | 4 Cyl 2.0 L GAS
View related parts
Buick Fan Motor Part Number: 22092353
$91.86 MSRP: $188.78
You Save: $96.92 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Kit
- Replaced by: 22137318
Fits the following Buick Models:
- Electra | 1990 | Limited, Park Avenue, Park Avenue Ultra, T-Type | 6 Cyl 3.8 L GAS
- LeSabre | 1990-1991 | Base, Custom, Limited | 6 Cyl 3.8 L GAS
- Park Avenue | 1991 | Base, Ultra | 6 Cyl 3.8 L GAS
View More
View related parts
Buick Fan Motor, Passenger Side Part Number: 88890702
$34.97 MSRP: $117.20
You Save: $82.23 (71%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Kit, Engine Coolant Fan; Motor; Motor Kit, Engine Air Cooling(Electrical)
- Position: Passenger Side
- Replaces: 22105177
Fits the following Buick Models:
- LeSabre | 1992-1999 | Custom, Limited | 6 Cyl 3.8 L GAS
- Park Avenue | 1991-1996 | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Fan Motor Part Number: 88958076
$84.40 MSRP: $134.12
You Save: $49.72 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor, Engine Air Cooling (Electrical); Motor, Engine Air Cooling(Electrical)
Fits the following Buick Models:
- Rendezvous | 2004-2006 | CX, CXL, CXL Plus, Ultra | 6 Cyl 3.6 L GAS
View related parts
Buick Fan & Motor Part Number: 88890701
Product Specifications
- Other Name: Motor Assembly, Engine Coolant Fan; Fan Motor; Motor; Motor Kit, Engine Air Cooling(Electrical); Fan Kit, Engine Air Cooling(Electrical)
- Replaces: 22088783, 22137319, 22088785
Fits the following Buick Models:
- LeSabre | 1986 | Custom, Limited | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
- Regal | 1990-1993 | Custom, Gran Sport, Limited | 6 Cyl 3.8 L GAS
- Riviera | 1995-1999 | Base | 6 Cyl 3.8 L GAS
- Skyhawk | 1987 | Custom, Limited, Sport, T-Type | 4 Cyl 2.0 L GAS
- Skylark | 1990-1991 | Base, Custom, Gran Sport, Luxury Edition | 6 Cyl 3.3 L GAS
View More
View related parts
Buick Fan Motor Part Number: 88890705
Product Specifications
- Other Name: Motor Kit, Engine Coolant Fan; Motor; Motor Kit, Engine Air Cooling(Electrical)
- Replaces: 22099170
Fits the following Buick Models:
- Century | 1994-1996 | Custom, Limited, Special | 4 Cyl 2.2 L GAS, 6 Cyl 3.1 L GAS
- Reatta | 1988-1991 | Base | 6 Cyl 3.8 L GAS
- Riviera | 1986-1993 | Luxury, T-Type | 6 Cyl 3.8 L GAS
View More
View related parts
Buick Fan Motor, Passenger Side Part Number: 12368637
Product Specifications
- Other Name: Motor Kit, Engine Air Cooling (Electrical); Motor; Motor Kit, Engine Air Cooling(Electrical)
- Position: Passenger Side
- Replaces: 22137036, 12367231
Fits the following Buick Models:
- Century | 1995-1996 | Custom, Limited, Special | 4 Cyl 2.2 L GAS, 6 Cyl 3.1 L GAS
View related parts
Buick Fan & Motor, Passenger Side Part Number: 13300195
Product Specifications
- Other Name: Fan, Engine Air Cooling (Electrical); Radiator Fan Assembly; Cooling Fan Assembly
- Position: Passenger Side
- Replaces: 13241734
Fits the following Buick Models:
- Regal | 2011 | CXL | 4 Cyl 2.0 L FLEX
View related parts
Buick Fan Motor Part Number: 88890704
Product Specifications
- Other Name: Motor Kit, Engine Coolant Fan; Motor; Motor Kit, Engine Air Cooling(Electrical)
- Replaces: 22054181, 22088780
Fits the following Buick Models:
- Skyhawk | 1984-1987 | Custom, Limited, Sport, T-Type | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
View related parts
Buick Fan Motor Part Number: 88890706
Product Specifications
- Other Name: Motor Kit, Engine Coolant Fan; Motor Kit, Engine Air Cooling(Electrical)
- Replaces: 22136984, 12368629
Fits the following Buick Models:
- Regal | 1994-1996 | Custom, Gran Sport, Limited, Olympic Gold Edition | 6 Cyl 3.8 L GAS
View related parts
Buick Fan Motor, Passenger Side Part Number: 10427838
Product Specifications
- Other Name: Motor, Engine Air Cooling (Electrical); Motor; Motor, Engine Air Cooling(Electrical)
- Position: Passenger Side
Fits the following Buick Models:
- Rendezvous | 2002-2007 | CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
Buick Fan Motor Part Number: 22035556
Product Specifications
- Other Name: Elec Cooling M; Motor
Fits the following Buick Models:
- Century | 1984-1985 | Custom, Estate, Estate Wagon, Limited, Olympia Limited | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS
- Skylark | 1984-1985 | Custom, Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS
View related parts
Buick Fan & Motor Part Number: 22074969
Product Specifications
- Other Name: Motor Assembly; Fan Motor; Motor; Motor Kit, Engine Air Cooling(Electrical)
Fits the following Buick Models:
- Century | 1984-1985 | Custom, Estate Wagon, Limited | 6 Cyl 2.8 L GAS
- Electra | 1985-1987 | Limited, Park Avenue, T-Type | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL
- LeSabre | 1986 | Custom, Limited | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
- Skyhawk | 1984-1987 | Custom, Limited, Sport, T-Type | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
- Skylark | 1985 | Custom, Limited | 4 Cyl 2.5 L GAS
- Somerset Regal | 1985 | Base, Limited | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View More
View related parts
Buick Fan Motor Part Number: 22040881
Product Specifications
- Other Name: Motor Package; Motor
- Replaced by: 22123801
Fits the following Buick Models:
- Century | 1984-1985 | Custom, Estate, Estate Wagon, Limited, Olympia Limited, T-Type | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Fan Motor, Passenger Side Part Number: 10427858
Product Specifications
- Other Name: Motor, Engine Air Cooling (Electrical); Motor; Motor, Engine Air Cooling(Electrical)
- Position: Passenger Side
Fits the following Buick Models:
- Rendezvous | 2002-2007 | CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
Buick Fan Motor Part Number: 22134672
Product Specifications
- Other Name: Motor Kit, Cooling Fan; Motor; Motor Kit, Engine Air Cooling(Electrical)
Fits the following Buick Models:
- Century | 1984-1986 | Custom, Estate Wagon, Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL
- Skylark | 1984-1985 | Custom, Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS
View related parts
Buick Fan Motor Part Number: 88958078
Product Specifications
- Other Name: Motor, Engine Air Cooling (Electrical); Motor, Engine Air Cooling(Electrical)
Fits the following Buick Models:
- Rendezvous | 2004-2006 | CX, CXL, CXL Plus, Ultra | 6 Cyl 3.6 L GAS

| Page 1 of 3 |Next >

1-20 of 50 Results

Buick Fan Motor

Choose OEM Fan Motor, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Buick's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Buick Fan Motor. You can shop at highly competitive prices and protect your budget. All our genuine Buick parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Buick Fan Motor is a proactive controller of engine temperature which safeguards powertrains on each drive. Buick cars have been distinguished by their heritage and forward-thinking nature and with their ride being smooth and quiet courtesy of the innovations such as quiet tuning, refined suspensions, and technology that is centered on the driver, thus making trips in them comfortable and stress free. With the cabins, the passengers are put in comfort and easy seating that is easy to understand and infotainments that are soft and warm bring the luxurious value right at the fingertips as the exterior design of the car sends signals of confidence to all roads. Buick is also future-facing and presents some bold ideas like the Wildcat EV that previews a thrilling electric future and demonstrates that the brand is not standing still. All these features make the car models that are moderate in terms of tradition and modern needs, providing families and commuters with a reliable and stylish option. In this range, the Fan Motor has a key role in ensuring that all the models are cool and efficient. A Fan Motor will engage the cooling fan on the sensing of an increase in heat, and it will rapidly circulate the air in the radiator to maintain the coolant at the optimal temperature, which in turn keeps the performance, fuel efficiency, and safety constant. Since the Buick engineering philosophy attaches importance to reliability throughout its line, the Fan Motor is built on stable materials and intelligent control logic to provide consistent operation in city traffic or on long highways. Motorists will have an easy time knowing that this small part is quietly protecting the engine and helps to increase the general life of their cars.

Buick Fan Motor Parts and Q&A

Fan Motor
22136414
Q: How to replace the Electric Cooling Fan Motor on Buick Regal?
A:
The initial step of electric cooling Fan Motor replacement requires the maintenance of safety by staying away from the electric engine coolant fan system while the ignition remains in the on position. The first step requires disconnecting both the cooling fan assembly and cooling fan heat shields. Remove the cooling Fan Blade nut followed by the cooling Fan Blade and disconnect the cooling Fan Motor electrical connectors. Dangerous situations due to imbalance will arise if you continue using a bent or damaged Fan Blade so it needs immediate replacement. During inspection of the cooling fan verify that all blades are intact and probe the mating surfaces for smoothness settling all imperfections through burr removal. You need to dismantle the cooling Fan Motor by removing its bolts followed by extracting the motor itself. Place the cooling Fan Motor in its designated position before installing the cooling Fan Motor bolts and tightening them to 6 nm (53 inch lbs.). After securing the cooling Fan Blade with the blade nut users should tighten it to 6 nm (53 inch lbs.). Proceed by connecting the electrical connectors of the cooling Fan Motor and reinstalling the heat shields then reassemble the entire cooling fan assembly.
Fan & Motor
22137318
Q: How to Service and Replace the Radiator Cooling Fan Motor on Buick LaCrosse?
A:
The replacement of electric cooling Fan Motor ly7 starts with removing the Fan Shroud assembly from the vehicle. Warning should be taken because the electric fan operates spontaneously when the motor is off which creates potential hazards for users. Always check that the ignition key contains the off position or lock setting before you disconnect the negative Battery Cable to protect from live electrical terminals. The ge-47827 (GE-47827) socket enables you to turn the Fan Motor drive plate in an opposite direction to the Fan Blade arrow until complete disengagement. Prevent Fan Blade rotation by holding it securely in place. Regularly check that the cooling Fan Motor has no openings by securing them with tape and dispose of the Fan Blade. Utilize center punching and drilling with a 6.35 mm (0.25 inch) drill bit to remove Fan Motor rivets from their positions before tidying up by taping out the rivets from the Fan Shroud so you can eliminate the Fan Motor. Remove any loose debris afterward and eliminate all discarded tape from the entry points. Install the new engine cooling Fan Motor inside the Fan Shroud by inserting bolts from its front side until the cooling Fan Motor nuts reach 6 nm (53 inch lbs. Of torque). Before putting the new Fan Blade hub into place, heat it in hot tap water reaching at least 49°c (120°F) hot for sixty seconds to stop cracking from forming. Act swiftly to place the heated Fan Blade onto the Fan Motor drive plate through alignment of the ge-47827 (GE-47827) socket for turning the Fan Motor drive plate with arrow orientation on the Fan Blade. The vehicle requires reinstalling of the Fan Shroud assembly after properly rotating the cooling Fan Blade into position.