OEM Buick LeSabre Steering Angle Sensor

Buick LeSabre Steering Angle Sensor Parts and Q&A

• Position Sensor
  15231652
  Q: How to service the Steering Angle Sensor on Buick LeSabre?

  A:

  Start by determining the sensor type from available visuals before you begin sensor removal processes. Sensor connector placement begins from the right side marking the front position. The current sensor does not require centering operations prior to its removal for reuse. First disconnect the connector from the sensor and separate the sensor from its adapter and bearing assembly. Before sensor installation check that the sensor's front displays a foam ring together with a pin hole for centering alongside a flush rotor flange cuff. When reinstalling a reused sensor it's necessary to make an alignment mark on the rotor flange cuff prior to removal to prevent alignment issues. A fresh sensor delivery includes a built-in pin which must not be removed before installation. Keep the pin installed until you successfully position the sensor inside its mount. Put the sensor in alignment with the steering shaft before inserting it into the adapter and bearing assembly and attaching the sensor. A pin aperture on the sensor front surface resides together with a raised rotor flange cuff and an alignment reference point. The existing sensor requires its alignment marks on the raised rotor flange cuff to match before installing the sensor components. Each sensor requires the same alignment setup following installation including careful documentation of critical features and specific alignment points.