How to replace the rack and pinion boot and breather tube using the J22610 Service Boot Clamp Installer on Buick LeSabre?

For Rack and Pinion Boot and breather tube replacement off the vehicle make use of j22610 service boot clamp installer. Start your work with the removal of the outer tie rod followed by taking off the hex jam nut from the inner tie rod assembly . Start by removing the tie rod end clamp from the Rack and Pinion Boot. Then use side cutters to remove the boot clamp from the Rack and Pinion Boot while discarding the clamp. It is essential to mark the breather tube position on the gear assembly both before removing the breather tube or Rack and Pinion Boot from the vehicle. The Rack and Pinion Boot and breather tube need removal. When assembling install the boot clamp onto the Rack and Pinion Boot after applying grease to both the inner tie rod assembly and the Rack And Pinion gear assembly . Place the Rack and Pinion Boot onto the inner tie rod assembly . Align the breather tube to its removal mark then to the molded nipple of the Rack and Pinion Boot to achieve proper gear assembly seating without any twisting or puckering of the boot. To install the Rack and Pinion Boot onto the inner tie rod assembly use the j22610 service boot clamp installer to insert and crimp the boot clamp on the Rack and Pinion Boot. You must pinch the pliers together on the Rack and Pinion Boot to install both the tie rod end clamp then the hex jam nut onto the inner tie rod assembly.

OEM Buick LeSabre Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Rack and Pinion Boots found

View related parts
Buick LeSabre Tie Rod Boot Part Number: 26035404
$246.05 MSRP: $390.65
You Save: $144.60 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Kit, Steering Tie Rod; Power Steering Cylinder Boot Kit; Rack and Pinion Boot; Inner Tie Rod Boot; Boot Kit; Dust Seal; Outer Tie Rod Seal; Boots; Boot
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-2005 Buick LeSabre | Base, Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Tie Rod Boot Part Number: 21011025
Product Specifications
- Other Name: Boot Kit, Steering Tie Rod; Power Steering Cylinder; Rack and Pinion Bellows Kit; Rack & Pinion Boot.; Inner Tie Rod Boot; Boot Kit; Boot; Boot Kit, Tie Rod End Dust
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Tie Rod Boot Part Number: 7843190
Product Specifications
- Other Name: Boot Kit, Steering Gear; Power Steering Cylinder Boot Kit; Rack and Pinion Boot; Boot Kit
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1987 Buick LeSabre | Base, Custom, Limited, T-Type | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS

Buick LeSabre Rack and Pinion Boot

Want to cut long-term maintenance and repair costs? Choose OEM Rack and Pinion Boot. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick LeSabre parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick LeSabre Rack and Pinion Boot includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Buick LeSabre Rack and Pinion Boot part is an essential one that draws the ethos of durability and efficiency of the Buick LeSabre model widely known for its durability couple with effectiveness in engineering. This protective rubber boot is applied to protect the rack of the steering from dirt and contamination which may interfere with the working of the rack and pinion. Fitting into the upper and lower ends of the rack, Rack and Pinion Boot also makes a safe cover that helps to protect the mechanism from damages, which is critical for the vehicle's functionality and safety. Complementing the Buick LeSabre model automobiles manufactured between 1959 and 2005, this boot is specifically designed to perfectly fit with the vehicle and improve on its performance. This is because the Rack and Pinion Boot should be regularly checked and replaced if needs be to avoid a bad steering system that is dangerous when driving. Among all Buick LeSabre Rack and Pinion Boot available in auto shops, one can notice the sturdiness and durability of this product, which accurately conveys the idea of 'Quality is the brand's main priority". Through designs that make it possible for the part to last longer and work harder, this part is evidence of the Buick LeSabre's engineering. Therefore the Rack and Pinion Boot because of the role in the driving mechanism, increases the Buick LeSabre efficiency, ensures wellbeing of passengers, so it is vital component in the framework of car manufacturing.

Buick LeSabre Rack and Pinion Boot Parts and Q&A

Tie Rod Boot
26035404
Q: How to replace the rack and pinion boot and breather tube using the J22610 Service Boot Clamp Installer on Buick LeSabre?
A:
For Rack And Pinion Boot and breather tube replacement off the vehicle make use of j22610 service boot clamp installer. Start your work with the removal of the outer tie rod followed by taking off the hex jam nut from the inner tie rod assembly . Start by removing the tie rod end clamp from the Rack and Pinion Boot. Then use side cutters to remove the boot clamp from the Rack and Pinion Boot while discarding the clamp. It is essential to mark the breather tube position on the gear assembly both before removing the breather tube or Rack and Pinion Boot from the vehicle. The Rack and Pinion Boot and breather tube need removal. When assembling install the boot clamp onto the Rack and Pinion Boot after applying grease to both the inner tie rod assembly and the Rack And Pinion gear assembly . Place the Rack and Pinion Boot onto the inner tie rod assembly . Align the breather tube to its removal mark then to the molded nipple of the Rack and Pinion Boot to achieve proper gear assembly seating without any twisting or puckering of the boot. To install the Rack and Pinion Boot onto the inner tie rod assembly use the j22610 service boot clamp installer to insert and crimp the boot clamp on the Rack and Pinion Boot. You must pinch the pliers together on the Rack and Pinion Boot to install both the tie rod end clamp then the hex jam nut onto the inner tie rod assembly.