How to properly remove and install a Drive Shaft on Buick Enclave?

It is vital to create paint markings or scribe lines between the transfer case flange and propeller shaft flange as well as the rear differential drive flange to minimize any imbalance in the driveline system. Ascend the vehicle before making marks that show how the front propeller shaft joins with the transfer case drive flange and the rear propeller shaft connects to the rear differential yoke. Dangerous work requires removing the bolts around the rear differential drive flange together with the propeller shaft bolts before supporting the propeller shaft through the rear differential. First remove the propeller shaft bolts along with each washer round the propeller shaft. The use of a brass drift or punch positioned at the propeller shaft notches in the transfer case drive flange will allow you to remove both the propeller drive shaft from the transfer case drive flange and then from the rear differential drive flange by carefully striking with a hammer. Support the propeller shaft where it connects to the transfer case drive flange then uninstall the bolts that mount the center support. Remove the support-mounted propeller shaft by working jointly with an assistant both on the vehicle and support structures. To minimize driveline system imbalance install the components by lining up the paint or scribe reference marks between the transfer case flange and the propeller shaft flange together with the rear differential drive flange. It is necessary to clean all bolts used for center bearing mounting as well as front and rear propeller shaft drive flanges. The propeller shaft should be positioned with helping hands on the supports before installing several mounting bolts together with washers to secure its position. Centre the reference marks of the front propeller shaft with the transfer case flange while installing the mounting bolt to maintain the center bearing position. Install temporary mounting bolts to the vehicle-based center support bearing before tightening several other mounting bolts into position to fix the propeller shaft. Confirm that the reference marks on the rear propeller shaft track with the rear differential yoke. Put the rest of the bolts and washers between the propeller shaft and transfer case flange into position before tightening them to 35 Nm (25 lb ft). Install all remaining connecting bolts which secure the propeller shaft to the rear differential yoke by torquing them to 50 Nm (37 lb ft). The vehicle descent should begin by removing all vehicle supports.

How to replace the front drive shaft on Buick Rainier?

A vehicle lift followed by removal of the steering gear crossmember constitutes the first step toward front propeller shaft replacement. Make a mark of the propeller shaft position to the front axle pinion yoke before removing yoke retainer bolts and yoke retainers from the front axle pinion yoke. Pounding on yoke ears or placing tools between Universal Joint and yoke during removal will damage injection joints therefore must be avoided. Users must disconnect the propeller shaft from the front axle pinion yoke before extracting the front propeller shaft from the Transfer Case by wrapping bearing caps with tape to avoid losing bearing rollers. To install the propeller shaft connect it to the Transfer Case until the reference marks match and the Slip Yoke engagement produces a distinct snapping sound. The propeller shaft assembly requires mounting of the front axle pinion yoke while fitting yoke retainers and bolts before torquing front propeller shaft yoke clamp bolts to 20 nm (15 ft. Lbs.). End the process by reinstalling the steering gear crossmember followed by lowering the vehicle.

OEM Buick Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

54 Drive Shafts found

View related parts
Buick Axle Shaft, Passenger Side Part Number: 7846164
$48.17 MSRP: $90.46
You Save: $42.29 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Axle; Shaft
- Position: Passenger Side
Fits the following Buick Models:
- Century | 1984-1994 | Custom, Estate Wagon, Limited, Special, T-Type | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL
View related parts
Buick Axle Shaft, Driver Side Part Number: 7846165
$36.43 MSRP: $68.42
You Save: $31.99 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft, Axle; Shaft
- Position: Driver Side
Fits the following Buick Models:
- Century | 1984-1994 | Custom, Estate Wagon, Limited, Special, T-Type | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL
View related parts
Buick Axle Assembly, Front Driver Side Part Number: 84750308
$273.41 MSRP: $450.37
You Save: $176.96 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Front Wheel Drive Half; Axle Shaft
- Position: Front Driver Side
- Replaced by: 85660319
Fits the following Buick Models:
- Enclave | 2018-2021 | Avenir, Base, Essence, Preferred, Premium | 6 Cyl 3.6 L GAS
View related parts
Buick Axle Assembly, Front Driver Side Part Number: 84527909
$411.01 MSRP: $705.87
You Save: $294.86 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Front Wheel Drive Half; Axle Shaft
- Position: Front Driver Side
- Replaced by: 84675882
Fits the following Buick Models:
- Regal Sportback | 2018-2020 | Avenir, Base, Essence, Preferred, Preferred II | 4 Cyl 2.0 L GAS
- Regal TourX | 2018-2020 | Base, Essence, Preferred | 4 Cyl 2.0 L GAS
View related parts
Buick Axle Shafts, Rear Driver Side Part Number: 84853352
$132.44 MSRP: $218.17
You Save: $85.73 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Rear Wheel Drive; Axle Shaft; Axle Assembly
- Position: Rear Driver Side
- Replaced by: 86508787
Fits the following Buick Models:
- Enclave | 2018-2024 | Avenir, Base, Essence, Preferred, Premium | 6 Cyl 3.6 L GAS
View related parts
Buick Axle Assembly, Front Part Number: 84410439
$200.04 MSRP: $317.60
You Save: $117.56 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Front Wheel Drive Half; Axle Shaft
- Position: Front
- Replaced by: 85558611
Fits the following Buick Models:
- Envision | 2017-2018 | Base, Essence, Preferred, Premium | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
View related parts
Buick Axle Assembly, Front Part Number: 60002820
$105.17 MSRP: $173.24
You Save: $68.07 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Front Wheel Drive Half; Axle Shaft
- Position: Front
- Replaced by: 60008700
Fits the following Buick Models:
- Encore GX | 2020-2021 | Essence, Preferred, Select | 3 Cyl 1.2 L GAS, 3 Cyl 1.3 L GAS
View related parts
Buick Axle Assembly, Front Part Number: 60003682
$123.21 MSRP: $202.97
You Save: $79.76 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Front Wheel Drive Half; Axle Shaft
- Position: Front
Fits the following Buick Models:
- Encore GX | 2020 | Essence, Preferred, Select | 3 Cyl 1.2 L GAS, 3 Cyl 1.3 L GAS
View related parts
Buick Axle Assembly, Front Driver Side Part Number: 84675884
$179.85 MSRP: $285.55
You Save: $105.70 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Front Wheel Drive Half; Axle Shaft
- Position: Front Driver Side
- Replaces: 84754487, 84138316
Fits the following Buick Models:
- Regal Sportback | 2018-2020 | GS | 6 Cyl 3.6 L GAS
View related parts
Buick Drive Shaft Part Number: 12562646
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
Fits the following Buick Models:
- Rendezvous | 2002-2006 | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Buick Drive Shaft Part Number: 15036982
Product Specifications
- Other Name: Shaft, Propeller; Driveshaft
- Replaces: 15152332, 15188012
Fits the following Buick Models:
- Rainier | 2004-2007 | CXL, CXL Plus | 6 Cyl 4.2 L GAS
View related parts
Buick Axle Assembly, Driver Side Part Number: 26014998
Product Specifications
- Other Name: Shaft Kit; Axle Shaft
- Position: Driver Side
Fits the following Buick Models:
- Skylark | 1991 | Base, Custom, Gran Sport, Luxury Edition | 4 Cyl 2.5 L GAS
View related parts
Buick Axle Shaft, Front Driver Side Part Number: 26002114
Product Specifications
- Other Name: Shaft, Front Wheel Drive
- Position: Front Driver Side
Fits the following Buick Models:
- Skylark | 1992-1993 | Custom, Gran Sport, Limited | 4 Cyl 2.3 L GAS, 6 Cyl 3.3 L GAS
View related parts
Buick Axle Assembly, Driver Side Part Number: 26000387
Product Specifications
- Other Name: Axle Kit; Axle Shaft; Shaft
- Position: Driver Side
Fits the following Buick Models:
- Century | 1984-1989 | Custom, Estate, Estate Wagon, Limited, Olympia Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL
View related parts
Buick Axle Shaft Assembly, Driver Side Part Number: 26009538
Product Specifications
- Other Name: Halfshaft; Axle Shaft; Axle Assembly
- Position: Driver Side
Fits the following Buick Models:
- Reatta | 1988 | Base | 6 Cyl 3.8 L GAS
- Riviera | 1988 | Luxury, T-Type | 6 Cyl 3.8 L GAS
View related parts
Buick Axle Shaft Assembly, Driver Side Part Number: 26009539
Product Specifications
- Other Name: Half Shift; Axle Shaft; Axle Assembly
- Position: Driver Side
Fits the following Buick Models:
- Reatta | 1988 | Base | 6 Cyl 3.8 L GAS
- Riviera | 1988 | Luxury, T-Type | 6 Cyl 3.8 L GAS
View related parts
Buick Axle Assembly, Passenger Side Part Number: 26015030
Product Specifications
- Other Name: Shaft Kit; Axle Shaft
- Position: Passenger Side
Fits the following Buick Models:
- Skylark | 1991 | Base, Custom, Gran Sport, Luxury Edition | 4 Cyl 2.5 L GAS
View related parts
Buick Axle Shaft Assembly, Passenger Side Part Number: 26015543
Product Specifications
- Other Name: Shaft Assembly; Axle Shaft; Axle Assembly
- Position: Passenger Side
Fits the following Buick Models:
- Reatta | 1988 | Base | 6 Cyl 3.8 L GAS
- Riviera | 1988 | Luxury, T-Type | 6 Cyl 3.8 L GAS
View related parts
Buick Axle Shaft Assembly, Passenger Side Part Number: 26015544
Product Specifications
- Other Name: Shaft Assembly; Axle Shaft; Axle Assembly
- Position: Passenger Side
Fits the following Buick Models:
- Reatta | 1988 | Base | 6 Cyl 3.8 L GAS
- Riviera | 1988 | Luxury, T-Type | 6 Cyl 3.8 L GAS
View related parts
Buick Axle Assembly, Driver Side Part Number: 26073387
Product Specifications
- Other Name: Shaft Kit; CV Axle Assembly; Axle Shaft; CV Axle; Shaft
- Position: Driver Side
Fits the following Buick Models:
- LeSabre | 2000-2005 | Custom, Limited | 6 Cyl 3.8 L GAS

| Page 1 of 3 |Next >

1-20 of 54 Results

Buick Drive Shaft

Choose OEM Drive Shaft, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Buick's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Buick Drive Shaft. You can shop at highly competitive prices and protect your budget. All our genuine Buick parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

The Buick Drive Shaft is clean in transmitting engine torque to wheels and maintains a smooth and confident acceleration over the terrain. In 1903, Buick started and soon earned a reputation of rides that silenced road noise, steering that felt firm as well as comfortable cabins that prevented drivers from having squeaks or rattles even when the road was under control. The marque has amalgamated massive shoulders of chrome with the new technology, installed fingertip infotainment, and just recently teased the all-electric Wildcat concept to demonstrate that it still believes in comfort and in no way the lack of swagger. It is loyal drivers who have to like the brand because it has maintained its pricing at reasonable levels but will never lower the standards to include niceties like heated seats, adaptive cruise, and soft-touch trim that make the trip to the shopping mall a step more civilized. The upshot is a track list that suits both first-time drivers and grandparents that nod their heads, as smooth is smooth no matter what the playlists or paint colors are. The Drive Shaft tolerates severe torsion, glides on splined joints with suspension travel and bends in universal joints such that engine power reaches front or rear wheels without vibration or deadweight that wastes fuel and dead-steers. The balance of steel or aluminum tubes, one-piece to be easier or two-piece to be longer, and coated to scowl rain and road salt are applied by Buick to leave its drivers with no more to worry about but the road. In case the traction changes, the Drive Shaft continues to channel power and keeps the wheels in a straight line, avoiding wheel hop and helping the vehicle follow a straight path in either a highway ramp or through the muddy path of a campground.

Buick Drive Shaft Parts and Q&A

Drive Shaft
25995545
Q: How to properly remove and install a Drive Shaft on Buick Enclave?
A:
It is vital to create paint markings or scribe lines between the transfer case flange and propeller shaft flange as well as the rear differential drive flange to minimize any imbalance in the driveline system. Ascend the vehicle before making marks that show how the front propeller shaft joins with the transfer case drive flange and the rear propeller shaft connects to the rear differential yoke. Dangerous work requires removing the bolts around the rear differential drive flange together with the propeller shaft bolts before supporting the propeller shaft through the rear differential. First remove the propeller shaft bolts along with each washer round the propeller shaft. The use of a brass drift or punch positioned at the propeller shaft notches in the transfer case drive flange will allow you to remove both the propeller drive shaft from the transfer case drive flange and then from the rear differential drive flange by carefully striking with a hammer. Support the propeller shaft where it connects to the transfer case drive flange then uninstall the bolts that mount the center support. Remove the support-mounted propeller shaft by working jointly with an assistant both on the vehicle and support structures. To minimize driveline system imbalance install the components by lining up the paint or scribe reference marks between the transfer case flange and the propeller shaft flange together with the rear differential drive flange. It is necessary to clean all bolts used for center bearing mounting as well as front and rear propeller shaft drive flanges. The propeller shaft should be positioned with helping hands on the supports before installing several mounting bolts together with washers to secure its position. Centre the reference marks of the front propeller shaft with the transfer case flange while installing the mounting bolt to maintain the center bearing position. Install temporary mounting bolts to the vehicle-based center support bearing before tightening several other mounting bolts into position to fix the propeller shaft. Confirm that the reference marks on the rear propeller shaft track with the rear differential yoke. Put the rest of the bolts and washers between the propeller shaft and transfer case flange into position before tightening them to 35 Nm (25 lb ft). Install all remaining connecting bolts which secure the propeller shaft to the rear differential yoke by torquing them to 50 Nm (37 lb ft). The vehicle descent should begin by removing all vehicle supports.
Drive Shaft
15036982
Q: How to replace the front drive shaft on Buick Rainier?
A:
A vehicle lift followed by removal of the steering gear crossmember constitutes the first step toward front propeller shaft replacement. Make a mark of the propeller shaft position to the front axle pinion yoke before removing yoke retainer bolts and yoke retainers from the front axle pinion yoke. Pounding on yoke ears or placing tools between Universal Joint and yoke during removal will damage injection joints therefore must be avoided. Users must disconnect the propeller shaft from the front axle pinion yoke before extracting the front propeller shaft from the Transfer Case by wrapping bearing caps with tape to avoid losing bearing rollers. To install the propeller shaft connect it to the Transfer Case until the reference marks match and the Slip Yoke engagement produces a distinct snapping sound. The propeller shaft assembly requires mounting of the front axle pinion yoke while fitting yoke retainers and bolts before torquing front propeller shaft yoke clamp bolts to 20 nm (15 ft. Lbs.). End the process by reinstalling the steering gear crossmember followed by lowering the vehicle.