How to replace the front side door window regulator in a sedan or wagon on 2010 Cadillac CTS?

Beginning the front side door Window Regulator replacement for sedans and wagons requires first opening the window to maximum height then removing the door trim panel. You must then remove the water deflector before taping the window to remain at full up. The door trim panel wiring harness connection occurs after you use the inner door panel access holes to loosen the window clamp fasteners by 4 revolutions. Betray the Window Regulator until it rests at 3/4 of its total range and then remove the electrical connector from the motor. Remove fasteners 1, 2, 3, 4, 5 to extract the Window Regulator from the door opening. Before installing the Window Regulator take it into the door panel while maintaining fastener safety instructions. Secure the Window Regulator fasteners (1, 2, 3, 4, 5) by torquing them to 9 nm (80 lb in). Lower the window using the tape until glass reaches its maximum rearward point inside the window channel. Start the vehicle while connecting the power Window Motor electrical connector to obtain peak power that helps the Window Motor position itself correctly. Raising the window to its maximum height enables you to tighten the window clamp fasteners to 11 nm (98 lb in). Drive the vehicle while verifying proper operation and tight sealing of the window before turning off the engine. The installation concludes by fitting the water deflector along with the door trim panel.

OEM 2010 Cadillac CTS Window Regulator

Electric Power Window Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Window Regulators found

View related parts
2010 Cadillac CTS Window Regulator, Rear Passenger Side Part Number: 22777912
$119.25 MSRP: $223.94
You Save: $104.69 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator, Rear Door Window Regulator
- Position: Rear Passenger Side
- Replaces: 25955406, 20921740, 25949776, 25920404
- Item Weight: 4.00 Pounds
- Item Dimensions: 8.1 x 25.2 x 16.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22777912
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac CTS Submodels:
- Base, Luxury, Performance, Premium, V, Vsport, Vsport Premium | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
2010 Cadillac CTS Window Regulator, Front Driver Side Part Number: 20888397
$151.21 MSRP: $271.22
You Save: $120.01 (45%)
Product Specifications
- Other Name: Regulator, Front Door Window Regulator; Window Motor; Regulator, Door Lock Remote Control
- Position: Front Driver Side
- Replaces: 15237525, 20849250, 25949773
- Item Weight: 4.30 Pounds
- Item Dimensions: 8.1 x 25.0 x 16.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20888397
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac CTS Submodels:
- Base, Luxury, Performance, Premium, V, Vsport, Vsport Premium | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
2010 Cadillac CTS Window Regulator, Rear Driver Side Part Number: 22777911
$123.83 MSRP: $222.11
You Save: $98.28 (45%)
Product Specifications
- Other Name: Regulator, Rear Door Window Regulator
- Position: Rear Driver Side
- Replaces: 20921739, 25955405, 25920403, 25949775
- Item Weight: 3.70 Pounds
- Item Dimensions: 24.6 x 16.3 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22777911
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac CTS Submodels:
- Base, Luxury, Performance, Premium, V, Vsport, Vsport Premium | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
2010 Cadillac CTS Window Regulator, Front Passenger Side Part Number: 20888398
$146.01 MSRP: $261.90
You Save: $115.89 (45%)
Product Specifications
- Other Name: Regulator, Front Door Window Regulator; Window Motor; Regulator, Door Lock Remote Control
- Position: Front Passenger Side
- Replaces: 15237524, 20849251, 25949774
- Item Weight: 4.40 Pounds
- Item Dimensions: 8.4 x 24.7 x 16.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20888398
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac CTS Submodels:
- Base, Luxury, Performance, Premium, V, Vsport, Vsport Premium | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS

2010 Cadillac CTS Window Regulator

With a comprehensive array of OEM 2010 Cadillac CTS Window Regulator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Cadillac CTS Window Regulator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Cadillac CTS Window Regulator Parts and Q&A

Q: How to replace the front side door window regulator in a sedan or wagon on 2010 Cadillac CTS?
A: Beginning the front side door Window Regulator replacement for sedans and wagons requires first opening the window to maximum height then removing the door trim panel. You must then remove the water deflector before taping the window to remain at full up. The door trim panel wiring harness connection occurs after you use the inner door panel access holes to loosen the window clamp fasteners by 4 revolutions. Betray the Window Regulator until it rests at 3/4 of its total range and then remove the electrical connector from the motor. Remove fasteners 1, 2, 3, 4, 5 to extract the Window Regulator from the door opening. Before installing the Window Regulator take it into the door panel while maintaining fastener safety instructions. Secure the Window Regulator fasteners (1, 2, 3, 4, 5) by torquing them to 9 nm (80 lb in). Lower the window using the tape until glass reaches its maximum rearward point inside the window channel. Start the vehicle while connecting the power Window Motor electrical connector to obtain peak power that helps the Window Motor position itself correctly. Raising the window to its maximum height enables you to tighten the window clamp fasteners to 11 nm (98 lb in). Drive the vehicle while verifying proper operation and tight sealing of the window before turning off the engine. The installation concludes by fitting the water deflector along with the door trim panel.