OEM 2009 Chevrolet Cobalt Brake Caliper Bracket

2009 Chevrolet Cobalt Brake Caliper Bracket Parts and Q&A

• Q: How to replace the front brake caliper bracket on 2009 Chevrolet Cobalt?

  A: Before removing the bracket, place the brake caliper on top of the car using mechanic's wire to protect the connected hydraulic hose from damage. Take out the brake pads and the Brake Pad retainers from the bracket by removing the brake caliper unit. You need to wipe away all contaminants from the pad mating surfaces before using the bracket again. Check if disc Brake Pad retainers show damaged mounting tabs or rust buildup plus side-to-side movement when placed within the mounting bracket and over the disc brake pads; replace all parts when problems appear. To detach the bracket from the Steering Knuckle, you need to remove all the brake caliper mounting bolts first. Check the caliper bracket for structural issues that make replacement necessary. Assess guide pin freedom and boot condition on the brake caliper (1, 4). Fix any issues by replacing guide pins and boots that show problems of movement restriction, wear, and tear. To install the Steering Knuckle mount, position the Brake Caliper Bracket without thread locking compounds or standard taps. Fasten the bracket with bolts tightened to 115 nm (85 lb ft) of torque. Spread high-temperature brake lubricant thinly on pad parts where they join hardware while cleaning the pad attachment spots on retaining components. Fit the Brake Pad retainers first and insert the brake pads afterward by placing the sensor-equipped disc Brake Pad with its wear sensor facing the rotor. Finally, push away the support and move the brake caliper onto the mounting bracket with the brake pads inside.