How to replace an emblem or nameplate on 2009 Cadillac STS?

Before you install a new emblem/nameplate stick tape on the mounting surface and use other tape to create alignment marks. Set the J 25070 (Heat Gun) over the emblem/nameplate surface for 30 seconds with a circular motion while keeping it 152 mm apart to reach the appropriate temperature. Stay careful to prevent harm to the panel's outside surface. Your plastic flat scraper will safely pop off the emblem/nameplate from its plastic panel mounting spot. Use the 3M(TM) Scotch Brite model adhesive removed disk P/N 07501 to extract residue from body panels while a Varnish Makers and Painters cloth dipped in naphtha or a mixture of isopropyl alcohol and water efficiently cleans plastic panels. Clean the replacement area on your emblem/nameplate without any dust particles present. Clean the application area using the same lint-free cloth dipped in cleaning solution and let it air dry before starting. Place tape on the surface to show where you should install the emblem/nameplate when you do not have marks. To properly position the replacement emblem/nameplate press the J 25070 Heat Gun against the mounting surface keeping it at 80-105°F and verify that the emblem/nameplate stays near 85-90°F without touching its adhesive backing. Stick the nameplate onto the chosen area following the installed marks. Press it gently onto the surface using equal force across the entire label. Take away the covering tape from the mounting area.

OEM 2009 Cadillac STS Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Emblems found

View related parts
2009 Cadillac STS Emblem, Front Part Number: 15263150
$78.69 MSRP: $117.12
You Save: $38.43 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.3 x 4.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15263150
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac STS Center Cap, Black Part Number: 9596629
$47.99 MSRP: $68.66
You Save: $20.67 (31%)
ADD TO CART
Product Specifications
- Other Name: Cap-Hub Polished 19" Wheels *Black Backgr; Wheel Center Cap; Hub Cap; Emblem; Emblem, Wheel Cover Appearance; Cap, Wheel - Front And Rear; Cap, Wheel Trim
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.8 x 4.7 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9596629
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac STS Submodels:
- V | 8 Cyl 4.4 L GAS
View related parts
2009 Cadillac STS Emblem Part Number: 84689784
$11.42 MSRP: $17.00
You Save: $5.58 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Front Side Door; Decal; Nameplate; Emblem, Cab, Load Carrier, Rear End, Door, Quarter Panel, Fender, Rocker Panel, Side Step.
- Replaces: 15223483, 15223484
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84689784
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2009 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac STS Nameplate Part Number: 89045021
$84.71 MSRP: $141.21
You Save: $56.50 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Instrument Panel
- Item Weight: 0.50 Pounds
- Item Dimensions: 17.9 x 2.0 x 0.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89045021
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac STS Submodels:
- Base, Platinum | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac STS Emblem, Front Part Number: 10376727
Product Specifications
- Other Name: Emblem Assembly-Front Bumper Fascia; Emblem, Bumper/Fascia
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.3 x 5.6 x 0.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10376727
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac STS Submodels:
- V | 8 Cyl 4.4 L GAS
View related parts
2009 Cadillac STS Nameplate, Rear Part Number: 10387855
Product Specifications
- Other Name: Plate, Rear End Panel And Tailgate; Emblem, End Gate And Rear Door Decoration; Emblem,Rear End Panel And Tailgate; Plate,Rear End Panel And Tailgate
- Position: Rear
- Replaces: 10372469, 25739124, 25762472
- Item Weight: 0.30 Pounds
- Item Dimensions: 4.9 x 1.6 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10387855
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac STS Emblem Part Number: 25767582
Product Specifications
- Other Name: Emblem, High Mount Stop Lamp; Emblem, Tail Lamp
- Replaces: 25739126
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.4 x 1.8 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25767582
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac STS Emblem Part Number: 25767581
Product Specifications
- Other Name: Emblem, Tail Lamp
- Replaces: 25739125
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.1 x 3.0 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25767581
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac STS Emblem, Front Part Number: 15851892
$94.51 MSRP: $140.66
You Save: $46.15 (33%)
Product Specifications
- Other Name: Emblem, Front Fender Name; Nameplate; Emblem,Rear End Panel And Tailgate; Plate,Rear End Panel And Tailgate; Emblem, Front Side Door
- Position: Front
- Replaces: 25754866
- Item Weight: 0.30 Pounds
- Item Dimensions: 4.9 x 1.6 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15851892
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac STS Submodels:
- V | 8 Cyl 4.4 L GAS
View related parts
2009 Cadillac STS Nameplate, Front Part Number: 15810646
$63.71 MSRP: $94.82
You Save: $31.11 (33%)
Product Specifications
- Other Name: Emblem, Front Side Door
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 14.6 x 1.1 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15810646
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac STS Submodels:
- V | 8 Cyl 4.4 L GAS
View related parts
2009 Cadillac STS Spacer, Front Part Number: 25786165
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.0 x 6.3 x 0.9 inches
- Condition: New
- SKU: 25786165
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac STS Nameplate Part Number: 89045020
Product Specifications
- Other Name: Emblem, Instrument Panel
- Item Weight: 0.50 Pounds
- Item Dimensions: 18.3 x 2.0 x 0.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89045020
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac STS Submodels:
- Base, Platinum | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac STS Nameplate Part Number: 89045022
Product Specifications
- Other Name: Emblem, Instrument Panel
- Item Weight: 0.50 Pounds
- Item Dimensions: 17.7 x 2.0 x 0.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89045022
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac STS Submodels:
- Base, Platinum | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac STS Nameplate, Rear Part Number: 10334040
Product Specifications
- Other Name: Plate, Rear End Panel And Tailgate; Plate,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.30 Pounds
- Item Dimensions: 5.3 x 1.3 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10334040
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac STS Submodels:
- Base, Platinum | 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac STS Emblem, Front Part Number: 25791152
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.8 x 6.5 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25791152
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS

2009 Cadillac STS Emblem

With a comprehensive array of OEM 2009 Cadillac STS Emblem, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Cadillac STS Emblem are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Cadillac STS Emblem Parts and Q&A

Q: How to replace an emblem or nameplate on 2009 Cadillac STS?
A: Before you install a new emblem/nameplate stick tape on the mounting surface and use other tape to create alignment marks. Set the J 25070 (Heat Gun) over the emblem/nameplate surface for 30 seconds with a circular motion while keeping it 152 mm apart to reach the appropriate temperature. Stay careful to prevent harm to the panel's outside surface. Your plastic flat scraper will safely pop off the emblem/nameplate from its plastic panel mounting spot. Use the 3M(TM) Scotch Brite model adhesive removed disk P/N 07501 to extract residue from body panels while a Varnish Makers and Painters cloth dipped in naphtha or a mixture of isopropyl alcohol and water efficiently cleans plastic panels. Clean the replacement area on your emblem/nameplate without any dust particles present. Clean the application area using the same lint-free cloth dipped in cleaning solution and let it air dry before starting. Place tape on the surface to show where you should install the emblem/nameplate when you do not have marks. To properly position the replacement emblem/nameplate press the J 25070 Heat Gun against the mounting surface keeping it at 80-105°F and verify that the emblem/nameplate stays near 85-90°F without touching its adhesive backing. Stick the nameplate onto the chosen area following the installed marks. Press it gently onto the surface using equal force across the entire label. Take away the covering tape from the mounting area.