How to replace the exhaust heat shield for the center bearing on 2009 Cadillac SRX?

The replacement of the Exhaust Heat Shield for the center bearing begins by supporting the vehicle during elevation. Detach the bolts which fasten the center bearing heat shield to its mounting location on the center bearing. Once the heat shield is tilted to one side you can gently pull it free from the body and Drive Shaft center bearing while also avoiding the exhaust pipes before extraction. Install the new heat shield by placing it between the car body and Drive Shaft center bearing and exhaust pipes so that holes on the shield match those on the bearing. Catch the center bearing heat shield bolts in position through the center bearing before torquing them to 8 nm (71 lb in). Finally, lower the vehicle.

OEM 2009 Cadillac SRX Exhaust Heat Shield

Heat Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Exhaust Heat Shields found

View related parts
2009 Cadillac SRX Heat Shield, Driver Side Part Number: 12607338
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Position: Driver Side
- Replaces: 12567838
- Item Weight: 1.30 Pounds
- Item Dimensions: 20.2 x 11.9 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12607338
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac SRX Submodels:
- Base | 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac SRX Heat Shield, Passenger Side Part Number: 12576372
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Position: Passenger Side
- Item Weight: 2.50 Pounds
- Item Dimensions: 23.9 x 8.4 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12576372
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac SRX Submodels:
- Base | 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac SRX Heat Shield Part Number: 12617267
Product Specifications
- Other Name: Shield, Exhaust Manifold; Exhaust Heat Shield
- Replaces: 12580707
- Item Weight: 2.10 Pounds
- Item Dimensions: 14.6 x 8.0 x 7.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12617267
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS
View related parts
2009 Cadillac SRX Heat Shield Part Number: 12580706
Product Specifications
- Other Name: Shield, Exhaust Manifold; Exhaust Heat Shield
- Item Weight: 2.00 Pounds
- Item Dimensions: 13.5 x 6.7 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12580706
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS

2009 Cadillac SRX Exhaust Heat Shield

With a comprehensive array of OEM 2009 Cadillac SRX Exhaust Heat Shield, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Cadillac SRX Exhaust Heat Shield are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Cadillac SRX Exhaust Heat Shield Parts and Q&A

Q: How to replace the exhaust heat shield for the center bearing on 2009 Cadillac SRX?
A: The replacement of the Exhaust Heat Shield for the center bearing begins by supporting the vehicle during elevation. Detach the bolts which fasten the center bearing heat shield to its mounting location on the center bearing. Once the heat shield is tilted to one side you can gently pull it free from the body and Drive Shaft center bearing while also avoiding the exhaust pipes before extraction. Install the new heat shield by placing it between the car body and Drive Shaft center bearing and exhaust pipes so that holes on the shield match those on the bearing. Catch the center bearing heat shield bolts in position through the center bearing before torquing them to 8 nm (71 lb in). Finally, lower the vehicle.