How to Replace Coil Springs on 2009 Buick Lucerne?

The first step to replace a coil spring requires vehicle elevation and proper support. Begin by removing the tire as well as the wheel followed by using a suitable jack to hold the Control Arm. Begin by disconnecting the automatic level control sensor link from the Control Arm and finishing by removing the lower shock absorber retaining bolts. Remove the stabilizer link from the Control Arm and unfasten both rear caliper pin bolts. Before you detach the adjustment link retaining nut you should suspend the brake caliper via heavy wire. The suspension specialist uses j 24319-b to detach the adjustment link from the lower Control Arm before slowly lowering the arm until it rests on the support assembly. Start by removing the coil spring along with its insulator via a pry under the spring's lower insulator. This will allow you to separate the lower piece of Control Arm insulator from the coil spring. Begin installation by mounting the upper Coil Spring Insulator to the body while inserting the lower Coil Spring Insulator into the Control Arm. After proper installation insert the insulators correctly before putting in the coil spring. Vehicle structure protection needs to be prioritized while installing fasteners. Lift the lower Control Arm into position while tightening shock absorber retaining bolts to 25 nm (18 lb ft). Fitting the rear brake caliper requires tightening the guide pin bolts at 34 nm or 25 lb in. Use the stabilizer link before you connect the adjustment link to the Control Arm while applying 30 nm (22 lb ft) of torque plus a 180-degree turn. Begin by connecting the automatic level control sensor link to the Control Arm before reinstalling the tire and wheel then finishing by lowering the vehicle.

OEM 2009 Buick Lucerne Coil Springs

Strut Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Coil Springs found

View related parts
2009 Buick Lucerne Coil Spring, Front Part Number: 15781812
$63.88 MSRP: $119.97
You Save: $56.09 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs; Spring
- Position: Front
- Replaces: 15781811
- Item Weight: 8.30 Pounds
- Item Dimensions: 14.8 x 7.3 x 7.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15781812
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Buick Lucerne Coil Spring, Rear Part Number: 25910862
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Replaces: 10390208
- Item Weight: 5.70 Pounds
- Item Dimensions: 13.1 x 6.9 x 6.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25910862
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Buick Lucerne Coil Spring, Rear Part Number: 25901662
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Item Weight: 4.50 Pounds
- Item Dimensions: 11.8 x 6.9 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 25901662
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Buick Lucerne Coil Spring, Rear Part Number: 25910859
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Replaces: 10390205
- Item Weight: 5.70 Pounds
- Item Dimensions: 12.4 x 6.8 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25910859
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Buick Lucerne Coil Spring, Rear Part Number: 25910858
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Replaces: 10390204
- Item Weight: 5.60 Pounds
- Item Dimensions: 15.0 x 7.7 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25910858
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Buick Lucerne Coil Spring, Rear Part Number: 25910861
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Replaces: 10390207
- Item Weight: 4.50 Pounds
- Item Dimensions: 11.9 x 6.9 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25910861
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Buick Lucerne Coil Spring, Rear Part Number: 25910860
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Replaces: 10390206
- Item Weight: 4.70 Pounds
- Item Dimensions: 11.7 x 6.7 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25910860
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Buick Lucerne Coil Spring, Front Part Number: 25857394
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs
- Position: Front
- Item Weight: 6.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25857394
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS

2009 Buick Lucerne Coil Springs

With a comprehensive array of OEM 2009 Buick Lucerne Coil Springs, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Buick Lucerne Coil Springs are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Buick Lucerne Coil Springs Parts and Q&A

Q: How to Replace Coil Springs on 2009 Buick Lucerne?
A: The first step to replace a coil spring requires vehicle elevation and proper support. Begin by removing the tire as well as the wheel followed by using a suitable jack to hold the Control Arm. Begin by disconnecting the automatic level control sensor link from the Control Arm and finishing by removing the lower shock absorber retaining bolts. Remove the stabilizer link from the Control Arm and unfasten both rear caliper pin bolts. Before you detach the adjustment link retaining nut you should suspend the brake caliper via heavy wire. The suspension specialist uses j 24319-b to detach the adjustment link from the lower Control Arm before slowly lowering the arm until it rests on the support assembly. Start by removing the coil spring along with its insulator via a pry under the spring's lower insulator. This will allow you to separate the lower piece of Control Arm insulator from the coil spring. Begin installation by mounting the upper Coil Spring Insulator to the body while inserting the lower Coil Spring Insulator into the Control Arm. After proper installation insert the insulators correctly before putting in the coil spring. Vehicle structure protection needs to be prioritized while installing fasteners. Lift the lower Control Arm into position while tightening shock absorber retaining bolts to 25 nm (18 lb ft). Fitting the rear brake caliper requires tightening the guide pin bolts at 34 nm or 25 lb in. Use the stabilizer link before you connect the adjustment link to the Control Arm while applying 30 nm (22 lb ft) of torque plus a 180-degree turn. Begin by connecting the automatic level control sensor link to the Control Arm before reinstalling the tire and wheel then finishing by lowering the vehicle.