How to Replace Coil Springs on 2008 Buick Lucerne?

The procedure for coil spring replacement requires vehicle elevation with proper support. Remove the tire and wheel. First support the Control Arm with a suitable jack and afterward remove the automatic level control sensor link from the Control Arm. Begin by taking off both shock absorber retaining bolts and untethering the stabilizer link from the Control Arm. You should hang the rear brake caliper by using heavy wire after you remove the rear caliper pin bolts. Using a universal steering linkage puller (J 24319-B) to detach the adjustment link from the lower Control Arm you should first remove the adjustment link retaining nut. Hang the lower Control Arm from the support assembly with slow release. Use a pry bar underneath the lower Coil Spring Insulator to release both the coil spring and its insulator before pulling the upper insulator free from the lower Control Arm to separate the insulator from the coil spring. Begin by installing the upper Coil Spring Insulator to the body then attach the lower Coil Spring Insulator into its position within the Control Arm during setup. Position the coil spring inside the control arms while making sure both insulators fit correctly into their proper locations. Fit the shock absorber retaining bolts to the lower Control Arm while torquing them to 25 n.m (18 lb ft). Secure the rear brake caliper to its bracket through caliper guide pin bolts that must be torqued to 34 n.m (25 lb in). Screw in the stabilizer link before you install the adjustment link on the Control Arm by tightening its retaining nut to 30 n.m (22 lb ft) including 180 degrees. Plug the automatic level control sensor into the Control Arm followed by tire and wheel installation before lowering the vehicle.

OEM 2008 Buick Lucerne Coil Springs

Strut Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Coil Springs found

View related parts
2008 Buick Lucerne Coil Spring, Front Part Number: 15781812
$63.88 MSRP: $119.97
You Save: $56.09 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs; Spring
- Position: Front
- Replaces: 15781811
- Item Weight: 8.30 Pounds
- Item Dimensions: 14.8 x 7.3 x 7.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15781812
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Buick Lucerne Coil Spring, Rear Part Number: 25910862
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Replaces: 10390208
- Item Weight: 5.70 Pounds
- Item Dimensions: 13.1 x 6.9 x 6.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25910862
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Buick Lucerne Coil Spring, Rear Part Number: 25901662
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Item Weight: 4.50 Pounds
- Item Dimensions: 11.8 x 6.9 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 25901662
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Buick Lucerne Coil Spring, Rear Part Number: 25910859
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Replaces: 10390205
- Item Weight: 5.70 Pounds
- Item Dimensions: 12.4 x 6.8 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25910859
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Buick Lucerne Coil Spring, Rear Part Number: 25910858
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Replaces: 10390204
- Item Weight: 5.60 Pounds
- Item Dimensions: 15.0 x 7.7 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25910858
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Buick Lucerne Coil Spring, Rear Part Number: 25910861
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Replaces: 10390207
- Item Weight: 4.50 Pounds
- Item Dimensions: 11.9 x 6.9 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25910861
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Buick Lucerne Coil Spring, Rear Part Number: 25910860
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Replaces: 10390206
- Item Weight: 4.70 Pounds
- Item Dimensions: 11.7 x 6.7 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25910860
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Buick Lucerne Coil Spring, Front Part Number: 25857394
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs
- Position: Front
- Item Weight: 6.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25857394
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS

2008 Buick Lucerne Coil Springs

With a comprehensive array of OEM 2008 Buick Lucerne Coil Springs, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Buick Lucerne Coil Springs are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Buick Lucerne Coil Springs Parts and Q&A

Q: How to Replace Coil Springs on 2008 Buick Lucerne?
A: The procedure for coil spring replacement requires vehicle elevation with proper support. Remove the tire and wheel. First support the Control Arm with a suitable jack and afterward remove the automatic level control sensor link from the Control Arm. Begin by taking off both shock absorber retaining bolts and untethering the stabilizer link from the Control Arm. You should hang the rear brake caliper by using heavy wire after you remove the rear caliper pin bolts. Using a universal steering linkage puller (J 24319-B) to detach the adjustment link from the lower Control Arm you should first remove the adjustment link retaining nut. Hang the lower Control Arm from the support assembly with slow release. Use a pry bar underneath the lower Coil Spring Insulator to release both the coil spring and its insulator before pulling the upper insulator free from the lower Control Arm to separate the insulator from the coil spring. Begin by installing the upper Coil Spring Insulator to the body then attach the lower Coil Spring Insulator into its position within the Control Arm during setup. Position the coil spring inside the control arms while making sure both insulators fit correctly into their proper locations. Fit the shock absorber retaining bolts to the lower Control Arm while torquing them to 25 n.m (18 lb ft). Secure the rear brake caliper to its bracket through caliper guide pin bolts that must be torqued to 34 n.m (25 lb in). Screw in the stabilizer link before you install the adjustment link on the Control Arm by tightening its retaining nut to 30 n.m (22 lb ft) including 180 degrees. Plug the automatic level control sensor into the Control Arm followed by tire and wheel installation before lowering the vehicle.