How to replace the control arm bushing in the rear suspension on 2008 Chevrolet Uplander?

The replacement process for Control Arm bushings in the rear suspension begins with car elevation and support installation. A utility stand must support the Control Arm by resting in front of the coil spring. Before you can access the Control Arm Bushing you must first detach the rear axle bolts holding the Control Arm and lower the axle. Tag down the correct direction of the Control Arm Bushing when installed in the lower Control Arm. To properly remove and install the Control Arm Bushing use the j 28685 rear suspension bushing remover/installer (J 28685) together with the j 9519-e ball joint remover/installer kit (J 9519-E). During installation position the flat bushing edge at a 90-degree angle toward the fluid axis located 9 degrees off the Control Arm center line. Install the Control Arm Bushing using the j 28685 (J 28685) and j 9519-e (J 9519-E) tools, ensuring it reaches a position 30 mm (1.18 in) beyond the Control Arm. The j 28685 (J 28685) shows proper bushing installation because its end matches the indicator line. Raise the rear axle using a utility stand before installing the Control Arm Bolt to the rear axle and dropping the vehicle.

OEM 2008 Chevrolet Uplander Control Arm Bushing

Suspension Arm Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Control Arm Bushings found

View related parts
2008 Chevrolet Uplander Axle Beam Bushing, Rear Part Number: 15829134
$15.84 MSRP: $26.09
You Save: $10.25 (40%)
ADD TO CART
Product Specifications
- Other Name: Bushing, Rear Axle Control Arm; Axle Support Bushing; Crossmember Bushing; Axle Pivot Bushing; Bushing, Rear Axle Support And Control Arm
- Position: Rear
- Replaces: 10239185, 10341351, 15219518
- Item Weight: 1.20 Pounds
- Item Dimensions: 3.2 x 3.2 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15829134
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2008 Chevrolet Uplander Lower Control Arm Front Bushing Part Number: 10412124
$22.91 MSRP: $37.72
You Save: $14.81 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing Assembly-Front Lower Control Arm; Suspension Control Arm Bushing; Control Arm Bushing; Axle Pivot Bushing; Bushings; Bushing, Steering Knuckle Lower Control Arm
- Position: Front Lower
- Replaces: 10393215, 10255029
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.2 x 3.1 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10412124
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2008 Chevrolet Uplander Lower Control Arm Bushing, Front Part Number: 10260991
Product Specifications
- Other Name: Bushing Assembly-Front Lower Control Arm; Suspension Control Arm Bushing; Control Arm Bushing; Axle Pivot Bushing; Lower Control Arm Rear Bushing; Bushings; Bushing, Steering Knuckle Lower Control Arm
- Position: Front Lower
- Replaces: 10264395
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.0 x 2.6 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10260991
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2008 Chevrolet Uplander Control Arm Bushing

With a comprehensive array of OEM 2008 Chevrolet Uplander Control Arm Bushing, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Uplander Control Arm Bushing are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Uplander Control Arm Bushing Parts and Q&A

Q: How to replace the control arm bushing in the rear suspension on 2008 Chevrolet Uplander?
A: The replacement process for Control Arm bushings in the rear suspension begins with car elevation and support installation. A utility stand must support the Control Arm by resting in front of the coil spring. Before you can access the Control Arm Bushing you must first detach the rear axle bolts holding the Control Arm and lower the axle. Tag down the correct direction of the Control Arm Bushing when installed in the lower Control Arm. To properly remove and install the Control Arm Bushing use the j 28685 rear suspension bushing remover/installer (J 28685) together with the j 9519-e ball joint remover/installer kit (J 9519-E). During installation position the flat bushing edge at a 90-degree angle toward the fluid axis located 9 degrees off the Control Arm center line. Install the Control Arm Bushing using the j 28685 (J 28685) and j 9519-e (J 9519-E) tools, ensuring it reaches a position 30 mm (1.18 in) beyond the Control Arm. The j 28685 (J 28685) shows proper bushing installation because its end matches the indicator line. Raise the rear axle using a utility stand before installing the Control Arm Bolt to the rear axle and dropping the vehicle.