How to replace the front drive shaft on 2008 Chevrolet Silverado 1500?

Start the front propeller shaft replacement process by collecting two important tools which are the clamp pliers - narrow jaw (J 43218) along with other essential items. All driveline elements such as propeller shafts and wheel drive shafts and pinion flanges and output shafts require precise relation markings before breaking down the system. Lift the vehicle after which use a flat-bladed tool to pry up the exposed end of the Transfer Case clamp before removal. Use caution when making marks on the propeller shaft-pinion yoke connection because hitting the yoke ears is forbidden as well as inserting tools near the Universal Joint that may damage the seal embedding. Uninstall the front axle pinion yoke bolts and its retainers while protecting the bearing cap assemblies from damage. Position the bearing caps underneath protective tape before disconnection of the propeller shaft from the front axle pinion yoke. Entire the output shaft groove boot and then push the propeller shaft ahead to break the shaft connection with the output shaft. Start by taking away the boot clamp if needed before extracting both the boot and clamp. Check if the Transfer Case output shaft splines have enough lubrication since a lack of lubricant requires application of gm p/n 12345879 (Canadian P/N 10953511) or equivalent gm specification 9985830 lubricant. Reinstall the propeller shaft boot while attaching its clamp afterward before you guide the splines into the Transfer Case output shaft. The propeller shaft needs reinstallation on the front axle pinion yoke while carefully aligning the reference marks which were used during removal. Place yoke retainers on the castings and bolt them in position while torquing yoke retainers to 25 n.m (18 lb ft). Media lock the boot onto the Transfer Case output shaft by inserting it into the groove then crimp both clamps using the clamp pliers - narrow jaw (J 43218) while lowering the vehicle.

OEM 2008 Chevrolet Silverado 1500 Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Drive Shafts found

View related parts
2008 Chevrolet Silverado 1500 Drive Shaft Part Number: 20912697
$1216.48 MSRP: $1572.71
You Save: $356.23 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Replaces: 15794277
- Item Weight: 17.10 Pounds
- Item Dimensions: 80.4 x 4.3 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20912697
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2008 Chevrolet Silverado 1500 Drive Shaft Part Number: 20912702
$1598.35 MSRP: $2235.31
You Save: $636.96 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Replaces: 15791188, 15940304, 20877203
- Item Weight: 23.40 Pounds
- Item Dimensions: 94.4 x 5.6 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20912702
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2008 Chevrolet Silverado 1500 Drive Shaft Part Number: 15791187
$72.59 MSRP: $486.62
You Save: $414.03 (86%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Item Weight: 18.20 Pounds
- Item Dimensions: 84.0 x 3.6 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15791187
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Silverado 1500 Submodels:
- LS, LT, LTZ, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2008 Chevrolet Silverado 1500 Drive Shaft Part Number: 20912712
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Replaces: 25784251
- Item Weight: 21.20 Pounds
- Item Dimensions: 95.2 x 5.8 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20912712
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Silverado 1500 Submodels:
- LS, LT, LTZ, WT, XFE | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
2008 Chevrolet Silverado 1500 Drive Shaft Assembly Part Number: 15711948
Product Specifications
- Other Name: Shaft, Propeller; Driveshaft
- Item Dimensions: 71.5 x 3.8 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15711948
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2008 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2008 Chevrolet Silverado 1500 Drive Shaft, Front Part Number: 22845694
Product Specifications
- Other Name: Shaft Assembly-Front Axle Propeller; Driveshaft; Shaft, Propeller
- Position: Front
- Replaces: 15902927
- Item Weight: 15.70 Pounds
- Item Dimensions: 38.5 x 4.2 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22845694
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2008 Chevrolet Silverado 1500 Drive Shaft Part Number: 15286091
Product Specifications
- Other Name: Shaft Assembly-Front & Rear Propeller; Driveshaft; Shaft, Propeller
- Position: Front and Rear
- Item Weight: 42.80 Pounds
- Item Dimensions: 108.7 x 2.7 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15286091
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Silverado 1500 Submodels:
- LS, LT, LTZ, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2008 Chevrolet Silverado 1500 Drive Shaft Part Number: 20912708
Product Specifications
- Other Name: Shaft Assembly-Propeller; Slip Yoke; Shaft, Propeller
- Replaces: 15791185, 20877205
- Item Dimensions: 83.4 x 5.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20912708
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2008 Chevrolet Silverado 1500 Drive Shaft Part Number: 20912694
$445.81 MSRP: $704.62
You Save: $258.81 (37%)
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Replaces: 15794276, 15791190
- Item Weight: 17.70 Pounds
- Item Dimensions: 80.0 x 5.1 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20912694
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX

2008 Chevrolet Silverado 1500 Drive Shaft

With a comprehensive array of OEM 2008 Chevrolet Silverado 1500 Drive Shaft, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Silverado 1500 Drive Shaft are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Silverado 1500 Drive Shaft Parts and Q&A

Q: How to replace the front drive shaft on 2008 Chevrolet Silverado 1500?
A: Start the front propeller shaft replacement process by collecting two important tools which are the clamp pliers - narrow jaw (J 43218) along with other essential items. All driveline elements such as propeller shafts and wheel drive shafts and pinion flanges and output shafts require precise relation markings before breaking down the system. Lift the vehicle after which use a flat-bladed tool to pry up the exposed end of the Transfer Case clamp before removal. Use caution when making marks on the propeller shaft-pinion yoke connection because hitting the yoke ears is forbidden as well as inserting tools near the Universal Joint that may damage the seal embedding. Uninstall the front axle pinion yoke bolts and its retainers while protecting the bearing cap assemblies from damage. Position the bearing caps underneath protective tape before disconnection of the propeller shaft from the front axle pinion yoke. Entire the output shaft groove boot and then push the propeller shaft ahead to break the shaft connection with the output shaft. Start by taking away the boot clamp if needed before extracting both the boot and clamp. Check if the Transfer Case output shaft splines have enough lubrication since a lack of lubricant requires application of gm p/n 12345879 (Canadian P/N 10953511) or equivalent gm specification 9985830 lubricant. Reinstall the propeller shaft boot while attaching its clamp afterward before you guide the splines into the Transfer Case output shaft. The propeller shaft needs reinstallation on the front axle pinion yoke while carefully aligning the reference marks which were used during removal. Place yoke retainers on the castings and bolt them in position while torquing yoke retainers to 25 n.m (18 lb ft). Media lock the boot onto the Transfer Case output shaft by inserting it into the groove then crimp both clamps using the clamp pliers - narrow jaw (J 43218) while lowering the vehicle.