How to calibrate the Brake Light Switch on 2008 Chevrolet HHR?

In order to set brake pedal position sensor (BPPS), connect a scan tool and make the ignition running and the engine off. Go to Select Diagnostics, select the vehicle, and then Body, and to the Body Control Module. Complete the instructions on the screen to go through the calibration process of the BPPS, which is necessary once servicing the BPPS or the BCM.

OEM 2008 Chevrolet HHR Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2008 Chevrolet HHR Clutch Switch Part Number: 13597428
$9.22 MSRP: $17.32
You Save: $8.10 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Brake Pedal Position; Clutch Pedal Position Switch; Brake Light Switch; Stoplamp Switch; Sensor, Stop Lamp Switch; Sensor, Engine Clutch; Sensor, Brake
- Replaced by: 13549051
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.7 x 3.3 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 13597428
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS

2008 Chevrolet HHR Brake Light Switch

With a comprehensive array of OEM 2008 Chevrolet HHR Brake Light Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet HHR Brake Light Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet HHR Brake Light Switch Parts and Q&A

Q: How to calibrate the Brake Light Switch on 2008 Chevrolet HHR?
A: In order to set brake pedal position sensor (BPPS), connect a scan tool and make the ignition running and the engine off. Go to Select Diagnostics, select the vehicle, and then Body, and to the Body Control Module. Complete the instructions on the screen to go through the calibration process of the BPPS, which is necessary once servicing the BPPS or the BCM.