How to replace the Power Steering Hose from the cooler to the power steering reservoir on 2008 Cadillac XLR?

The first steps in changing the power steering cooler pipe/hose start with removing the air cleaner assembly along with the fuel injector sight shield. The clamp needs to be compressed first followed by disconnecting the power steering cooler pipe/hose from the Power Steering Reservoir. A vehicle lift enables workers to remove the retaining clip which lets them disconnect the power steering cooler pipe/hose from the cooler while 2 power steering pipe/hose routing bolts enable them to extract the cooler pipe/hose from the vehicle. Install the new power steering cooler pipe/hose by placing it into position and secure it with the 2 routing bolts which should be tightened to 11 n.m (97 lb in). Secure the power steering cooler pipe/hose to the cooler and use the retaining clip for attachment after which you can lower the vehicle. After setting the clamp compression you should connect the power steering cooler pipe/hose to the Power Steering Reservoir and then replace the fuel injector sight shield and the air cleaner assembly. As the last step you need to perform a power steering system fill and bleed process.

OEM 2008 Cadillac XLR Power Steering Hose

Power Steering Pressure Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Power Steering Hoses found

View related parts
2008 Cadillac XLR Power Steering Pressure Hose Part Number: 15859803
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Steering Gear Oil Pressure
- Replaces: 10350667, 15143860
- Item Weight: 1.90 Pounds
- Item Dimensions: 31.5 x 13.1 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15859803
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac XLR Submodels:
- Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac XLR Power Steering Return Hose Part Number: 15240032
Product Specifications
- Other Name: Hose-Power Steering Fluid Reservoir Inlet; Power Steering Hose; Inlet Hose; Reservoir Hose; Hose, Steering Gear Oil Return
- Replaces: 10348969
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.3 x 4.0 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15240032
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac XLR Submodels:
- Base, Platinum | 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac XLR Power Steering Cooler Part Number: 19122265
Product Specifications
- Other Name: Pipe, Steering Gear Oil Return
- Replaces: 10345599, 10371822, 15145599, 26024352
- Item Weight: 0.90 Pounds
- Item Dimensions: 31.9 x 14.2 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19122265
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac XLR Submodels:
- Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac XLR Cooler Pipe Part Number: 15274939
Product Specifications
- Other Name: Hose Assembly-Power Steering Fluid Cooling; Hose, Steering Fluid Cooler
- Item Weight: 0.70 Pounds
- Item Dimensions: 15.1 x 7.5 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15274939
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac XLR Submodels:
- Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac XLR Power Steering Return Hose Part Number: 15143863
Product Specifications
- Other Name: Hose-Power Steering Fluid Reservoir Inlet; Power Steering Hose; Inlet Hose; Hose, Steering Gear Oil Return
- Item Weight: 0.50 Pounds
- Item Dimensions: 9.9 x 3.6 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15143863
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac XLR Submodels:
- V | 8 Cyl 4.4 L GAS
View related parts
2008 Cadillac XLR Inlet Tube Part Number: 19133697
Product Specifications
- Other Name: Tube Kit, Steering Gear Oil Return; Power Steering Hose
- Item Weight: 0.60 Pounds
- Item Dimensions: 10.3 x 6.3 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19133697
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac XLR Submodels:
- V | 8 Cyl 4.4 L GAS
View related parts
2008 Cadillac XLR Inlet Tube Part Number: 19133668
Product Specifications
- Other Name: Tube Kit, Steering Gear Oil Return; Power Steering Hose
- Replaces: 88955554
- Item Weight: 0.70 Pounds
- Item Dimensions: 6.0 x 5.4 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19133668
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac XLR Submodels:
- Base, Platinum | 8 Cyl 4.6 L GAS

2008 Cadillac XLR Power Steering Hose

With a comprehensive array of OEM 2008 Cadillac XLR Power Steering Hose, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Cadillac XLR Power Steering Hose are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Cadillac XLR Power Steering Hose Parts and Q&A

Q: How to replace the Power Steering Hose from the cooler to the power steering reservoir on 2008 Cadillac XLR?
A: The first steps in changing the power steering cooler pipe/hose start with removing the air cleaner assembly along with the fuel injector sight shield. The clamp needs to be compressed first followed by disconnecting the power steering cooler pipe/hose from the Power Steering Reservoir. A vehicle lift enables workers to remove the retaining clip which lets them disconnect the power steering cooler pipe/hose from the cooler while 2 power steering pipe/hose routing bolts enable them to extract the cooler pipe/hose from the vehicle. Install the new power steering cooler pipe/hose by placing it into position and secure it with the 2 routing bolts which should be tightened to 11 n.m (97 lb in). Secure the power steering cooler pipe/hose to the cooler and use the retaining clip for attachment after which you can lower the vehicle. After setting the clamp compression you should connect the power steering cooler pipe/hose to the Power Steering Reservoir and then replace the fuel injector sight shield and the air cleaner assembly. As the last step you need to perform a power steering system fill and bleed process.