How to Replace a Coolant Temperature Sensor on 2008 Cadillac XLR?

In order to change the engine Coolant Temperature Sensor, begin by turning off the ignition then drain the coolant such that it is below the sensor ect. Next dismount the supercharger assembly and disconnect the ect sensor harness connector. Then, take off the ect sensor that is fixed on the right-hand Cylinder Head. When repairing the new ect sensor seal the threads of the sensor with sealer and install the ect sensor, tightening it to 20 n.m (15 lb ft). Reconnect the ect sensor harness connector and replace the supercharger assembly. Finally, refill the coolant system. Make sure all the replacement components are the right part number for application, adhere to the specified torque specifications, and do not cause any harm.

OEM 2008 Cadillac XLR Coolant Temperature Sensor

Coolant Water Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Temperature Sensor found

View related parts
2008 Cadillac XLR Coolant Temperature Sensor Part Number: 15326386
$24.96 MSRP: $46.88
You Save: $21.92 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Engine Coolant Temperature; Air Charge Temperature Sensor; Intake Air Temperature Sensor.; Temperature Sensor; Manifold Pressure Sensor; Oil Pressure Unit; Fan Switch; Other Sensors
- Replaces: 12146312, 25036979
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.0 x 1.2 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15326386
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac XLR Submodels:
- Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS

2008 Cadillac XLR Coolant Temperature Sensor

With a comprehensive array of OEM 2008 Cadillac XLR Coolant Temperature Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Cadillac XLR Coolant Temperature Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Cadillac XLR Coolant Temperature Sensor Parts and Q&A

Q: How to Replace a Coolant Temperature Sensor on 2008 Cadillac XLR?
A: In order to change the engine Coolant Temperature Sensor, begin by turning off the ignition then drain the coolant such that it is below the sensor ect. Next dismount the supercharger assembly and disconnect the ect sensor harness connector. Then, take off the ect sensor that is fixed on the right-hand Cylinder Head. When repairing the new ect sensor seal the threads of the sensor with sealer and install the ect sensor, tightening it to 20 n.m (15 lb ft). Reconnect the ect sensor harness connector and replace the supercharger assembly. Finally, refill the coolant system. Make sure all the replacement components are the right part number for application, adhere to the specified torque specifications, and do not cause any harm.