ChevyParts
My Garage
My Account
Cart
OEM 2008 Buick Lucerne Alternator
Generator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Alternators found
2008 Buick Lucerne Alternator Part Number: 84009366
$412.12 MSRP: $818.02You Save: $405.90 (50%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Generator Assembly; Generator, Engine Electrical
- Replaces: 20843302
- Item Weight: 13.70 Pounds
- Item Dimensions: 9.5 x 8.3 x 8.5 inches
- Condition: New
- SKU: 84009366
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2008 Buick Lucerne Alternator Part Number: 84009382
$206.43 MSRP: $409.73You Save: $203.30 (50%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Generator Assembly
- Replaced by: 19433415
- Item Weight: 14.60 Pounds
- Item Dimensions: 9.4 x 8.0 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84009382
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2008 Buick Lucerne Alternator
With a comprehensive array of OEM 2008 Buick Lucerne Alternator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Buick Lucerne Alternator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2008 Buick Lucerne Alternator Parts and Q&A
- Q: How to replace the alternator (RPO L26/3.8L) on 2008 Buick Lucerne?A: Begin generator replacement by disconnecting the negative Battery Cable (RPO L26/3.8L). After removing the intake manifold cover you should also remove the Drive Belt. Begin by removing the generator brace bolt and nut then proceed to remove the generator brace. The engine harness electrical connector needs unattachment from the generator then follow by relocation of the starter cable boot before removing the generator terminal nut and starter cable from the generator. Follow this sequence to uninstall the generator: remove the generator's front bolt, rear bolt and stud. To install the generator you must position it on the engine then install the generator front bolt. Secure the generator rear stud and bolt by torquing them to 50 n.m (37 lb ft). Fasten the starter cable to the generator before tightening the generator terminal nut to 20 n.m using (15 lb ft) torque specification. The installation process requires fitting the starter cable boot followed by connecting the engine harness electrical connector to the generator while mounting the generator brace along with its bolt and nut. Tighten the bolt to 25 n.m (18 lb ft) and the nut to 50 n.m (37 lb ft). The last installation steps include the Drive Belt and intake manifold cover before reattaching the negative Battery Cable.
