How to service the Steering Angle Sensor on 2007 Chevrolet Malibu?

Removal to service the Steering Angle Sensor: Before removing the sensor, determine the type of sensor. Un-attach the sensor and take it out of the assembly. In the event of reuse, place an alignment mark on the rotor flange cuff. In case of new sensors, never take out the pin before it is seated. Before installation, ensure that everything is aligned.

OEM 2007 Chevrolet Malibu Steering Angle Sensor

Steering Column Angle Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Steering Angle Sensor found

View related parts
2007 Chevrolet Malibu Position Sensor Part Number: 15260309
$112.18 MSRP: $192.65
You Save: $80.47 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Steering Column; Steering Wheel Speed Sensor
- Item Weight: 0.40 Pounds
- Item Dimensions: 5.2 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15260309
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Malibu Submodels:
- LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS

2007 Chevrolet Malibu Steering Angle Sensor

With a comprehensive array of OEM 2007 Chevrolet Malibu Steering Angle Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Malibu Steering Angle Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Malibu Steering Angle Sensor Parts and Q&A

Q: How to service the Steering Angle Sensor on 2007 Chevrolet Malibu?
A: Removal to service the Steering Angle Sensor: Before removing the sensor, determine the type of sensor. Un-attach the sensor and take it out of the assembly. In the event of reuse, place an alignment mark on the rotor flange cuff. In case of new sensors, never take out the pin before it is seated. Before installation, ensure that everything is aligned.