How to service and repair the pressure plate, clutch drive plate, and clutch driven plate on 2007 Chevrolet HHR?

To replace the clutch parts, loosen the spring pressure by firstly loosening bolts of the transmission and the clutch cover. Install the flywheel assembly, placement will be in line with the Clutch Alignment Arbor and the bolts will be tightened. Do not apply too much lubricant to the input shaft splines, lubricate the bearing and re-assemble the transmission then bleed hydraulic system.

OEM 2007 Chevrolet HHR Pressure Plate

Clutch Pressure Plate

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Pressure Plate found

View related parts
2007 Chevrolet HHR Pressure Plate Part Number: 12582698
$221.73 MSRP: $352.05
You Save: $130.32 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Engine Clutch (Pressure Plate); Clutch Kit; Plate, Engine Clutch(Pressure Plate)
- Item Weight: 9.70 Pounds
- Item Dimensions: 14.4 x 13.8 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12582698
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS

2007 Chevrolet HHR Pressure Plate

With a comprehensive array of OEM 2007 Chevrolet HHR Pressure Plate, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet HHR Pressure Plate are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet HHR Pressure Plate Parts and Q&A

Q: How to service and repair the pressure plate, clutch drive plate, and clutch driven plate on 2007 Chevrolet HHR?
A: To replace the clutch parts, loosen the spring pressure by firstly loosening bolts of the transmission and the clutch cover. Install the flywheel assembly, placement will be in line with the Clutch Alignment Arbor and the bolts will be tightened. Do not apply too much lubricant to the input shaft splines, lubricate the bearing and re-assemble the transmission then bleed hydraulic system.