How to replace the knock sensor on 2007 Chevrolet Cobalt?

The replacement process starts by removing the Starter followed by disconnecting the Knock Sensor (KS) harness connector. The ks retaining bolt needs removing to complete the upcoming steps of ks extraction. Check that the ks threaded surfaces are free from debri before you install them. Replace the Knock Sensor and torque the retaining bolt to a value of 25 n.m (18 lb ft). You should connect the Knock Sensor harness connector following the Starter installation.

OEM 2007 Chevrolet Cobalt Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2007 Chevrolet Cobalt Knock Sensor Part Number: 12567711
$28.40 MSRP: $53.34
You Save: $24.94 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor)
- Replaces: 12589373, 24577244, 12615500
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.2 x 7.0 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12567711
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

2007 Chevrolet Cobalt Knock Sensor

With a comprehensive array of OEM 2007 Chevrolet Cobalt Knock Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Cobalt Knock Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Cobalt Knock Sensor Parts and Q&A

Q: How to replace the knock sensor on 2007 Chevrolet Cobalt?
A: The replacement process starts by removing the Starter followed by disconnecting the Knock Sensor (KS) harness connector. The ks retaining bolt needs removing to complete the upcoming steps of ks extraction. Check that the ks threaded surfaces are free from debri before you install them. Replace the Knock Sensor and torque the retaining bolt to a value of 25 n.m (18 lb ft). You should connect the Knock Sensor harness connector following the Starter installation.