How to replace the auxiliary water pump on a 4.6L (LH2) with RPOs V03/V92 on 2007 Cadillac SRX?

A vehicle owner must drain engine coolant before starting the auxiliary water pump replacement task. You can remove the hose from the auxiliary water pump by sliding the hose clamp down using hose clamp pliers part number J 38185. Pull the hose clamp towards the hose and then disconnect the hose from the auxiliary water pump. Detach the auxiliary water pump electricity link before removing both pump nuts and finally removing the pump hardware. Position the new auxiliary water pump while putting the nuts in place then tighten them to 9 N.m (80 lb in). Push the hose onto the auxiliary water pump and secure it properly by sliding the hose clamp back using Hose Clamp Pliers J 38185. Position the new auxiliary water pump onto threads after linking the second hose and tightening the hose clamp with Hose Clamp Pliers (J 38185). Finally, fill the coolant.

OEM 2007 Cadillac SRX Water Pump

H2O Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Water Pumps found

View related parts
2007 Cadillac SRX Water Pump Part Number: 12595614
$151.34 MSRP: $284.20
You Save: $132.86 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump, Water; Pump, Engine Coolant
- Replaces: 12563631
- Item Weight: 1.20 Pounds
- Item Dimensions: 6.8 x 6.8 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12595614
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac SRX Submodels:
- Base | 8 Cyl 4.6 L GAS
View related parts
2007 Cadillac SRX Auxiliary Pump Part Number: 25746579
$130.56 MSRP: $236.30
You Save: $105.74 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump, Engine Coolant; Water Pump
- Item Weight: 1.40 Pounds
- Item Dimensions: 14.5 x 7.9 x 7.0 inches
- Condition: New
- SKU: 25746579
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2007 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2007 Cadillac SRX Water Pump Part Number: 12709178
$192.45 MSRP: $380.82
You Save: $188.37 (50%)
ADD TO CART
Product Specifications
- Other Name: Pump Kit-Water; Water Pump Assembly; Pump Kit, Engine Coolant
- Replaced by: 12739553
- Replaces: 12645176, 12637479, 12618472, 12657499
- Item Weight: 5.30 Pounds
- Condition: New
- SKU: 12709178
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac SRX Submodels:
- Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
2007 Cadillac SRX Water Pump Part Number: 12566029
Product Specifications
- Other Name: Pump, Water; Oil Pump
- Condition: New
- SKU: 12566029
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2007 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS

2007 Cadillac SRX Water Pump

With a comprehensive array of OEM 2007 Cadillac SRX Water Pump, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Cadillac SRX Water Pump are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Cadillac SRX Water Pump Parts and Q&A

Q: How to replace the auxiliary water pump on a 4.6L (LH2) with RPOs V03/V92 on 2007 Cadillac SRX?
A: A vehicle owner must drain engine coolant before starting the auxiliary water pump replacement task. You can remove the hose from the auxiliary water pump by sliding the hose clamp down using hose clamp pliers part number J 38185. Pull the hose clamp towards the hose and then disconnect the hose from the auxiliary water pump. Detach the auxiliary water pump electricity link before removing both pump nuts and finally removing the pump hardware. Position the new auxiliary water pump while putting the nuts in place then tighten them to 9 N.m (80 lb in). Push the hose onto the auxiliary water pump and secure it properly by sliding the hose clamp back using Hose Clamp Pliers J 38185. Position the new auxiliary water pump onto threads after linking the second hose and tightening the hose clamp with Hose Clamp Pliers (J 38185). Finally, fill the coolant.