Make sure this part fits

GM 12709178
Water Pump

2004-2024 GM

Customer Questions & Expert Answers (12)
GM 12709178 Water Pump
  • Part Description
    Pump Kit-Water
  • Replaced By
    12739553
  • Replaces
    12645176, 12637479, 12618472, 12657499
  • Manufacturer
    General Motors
Make sure this part fits
$192.45 MSRP: $380.82
You Save: $188.37 (50%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2008-2024 Buick EnclaveAvenir, Base, Convenience, CX, CXL, Essence, Leather, Preferred, Premium6 Cyl 3.6 L GAS
    2010-2016, 2008 Buick LaCrosseBase, Convenience, CX, CXL, CXS, Leather, Premium, Sport Touring, Touring6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
    2013-2019 Cadillac ATSLuxury, Performance, Premium, V6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
    2008-2017 Cadillac CTSBase, Luxury, Performance, Premium, Vsport, Vsport Premium, Vsport Premium Luxury6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
    2004-2016 Cadillac SRXBase, Luxury, Performance, Premium6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
    2008-2011 Cadillac STSBase, Platinum6 Cyl 3.6 L GAS
    2013-2019 Cadillac XTSBase, Livery, Luxury, Platinum, Premium, Premium Luxury, Vsport Platinum, Vsport Premium, Vsport Premium Luxury6 Cyl 3.6 L GAS
    2010-2015 Chevrolet CamaroLS, LT6 Cyl 3.6 L GAS
    2012-2017 Chevrolet CapricePPV6 Cyl 3.6 L FLEX
    2012 Chevrolet Captiva SportLT, LTZ6 Cyl 3.0 L FLEX
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12709178 designed for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 12709178 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What is the next step after retaining the water pump pulley for the 2010 Buick Enclave? Posted by Customer
    A:
    Remove the water pump pulley bolts and the pulley itself.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Water Pump
    Q:
    What should be removed after draining the cooling system for the 2008 Buick LaCrosse? Posted by Customer
    A:
    Remove the generator drive belt.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Water Pump
    Q:
    What is the torque specification for tightening the water pump bolts for the 2008 Cadillac CTS? Posted by Customer
    A:
    Tighten the water pump bolts to 10 N.m (89 lb in).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Water Pump
    Q:
    What tool is used to retain the water pump pulley for the 2009 Cadillac STS? Posted by Customer
    A:
    Use the EN 46104 (Water Pump Pulley Holding Tool).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Water Pump
    Q:
    What should be reinstalled after the water pump pulley for the 2007 Cadillac SRX? Posted by Customer
    A:
    Reinstall the drive belt tensioner and the water pump drive belt, followed by the cooling fan.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Water Pump
    Q:
    Which hoses need to be disconnected from the water pump for the 2010 Chevrolet Camaro? Posted by Customer
    A:
    Disconnect the radiator inlet hose, radiator outlet hose, and heater inlet and outlet hoses.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Water Pump
    Q:
    What is the torque specification for the inner water pump sprocket bolts for the 2010 Chevrolet Equinox? Posted by Customer
    A:
    Tighten them to 25 Nm (18 lb ft).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Water Pump
    Q:
    What is the procedure for positioning the water pump against the engine block for the 2008 Chevrolet Malibu? Posted by Customer
    A:
    Position the water pump against the engine block and hand tighten the bolts.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Water Pump
    Q:
    What should be done before installing a new water pump for the 2010 Chevrolet Traverse? Posted by Customer
    A:
    Clean the sealing surfaces of the water pump carefully before installing a new water pump seal and the water pump.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Water Pump
    Q:
    What is the procedure for installing the water pump pulley for the 2007 GMC Acadia? Posted by Customer
    A:
    Install the water pump pulley and its bolts, using the EN 46104 Water Pump Pulley Holding Tool (EN 46104) to retain the pulley while tightening the bolts to 10 N.m (89 lb in).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Water Pump
    Q:
    What bolts need to be removed to take out the water pump for the 2010 GMC Terrain? Posted by Customer
    A:
    Remove the three inner water pump sprocket to water pump bolts, followed by the two water pump bolts and the rear two water pump bolts.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Water Pump
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Water Pump 12709178 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12709178 Water Pump is available in the market under the name GM Water Pump. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12709178 Water Pump fits certain Chevrolet Colorado, Malibu, Camaro models, as well as GMC Acadia, Canyon, Terrain. Additionally, it is compatible with Cadillac CTS, ATS, SRX and Buick Enclave, LaCrosse models.
The original GM component designated by Manufacturer Part Number 12709178 maintains top performance when functioning as the Pump Kit-Water unit. The component 12709178 is constructed from durable material while weighing 5.30 Pounds. The component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Water Pump Assembly; Pump Kit, Engine Coolant. The part 12709178 has available replacement options listed under 12739553 or 12645176, 12637479, 12618472, 12657499. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.