How to replace the trailing arm on 2007 Cadillac SRX?

To replace the Trailing Arm lift up and support the vehicle with the tire and the wheel. Unbolt the automatic level control link from the top Control Arm, brake pipe bracket retaining nuts, and remove the brake pipe bracket from the mounting studs. Support the lower Control Arm with an appropriate jack then unknap nut and bolt the leading link to knuckle. After removing the jack, put the frame on a suitable jack and take out the front bolts of the frame in order to bring down the front of the rear frame. Then, remove the trailing link to the frame nut and bolt and pull the trailing link out of the vehicle. Instead for installation, start by disjointing the loosely installation of the trailing link to the vehicle but also disjointing the trailing link to frame bolt and nut. Lift the frame using a suitable jack and bolt the front bolts to the frame, making sure to tighten (265 N.m [195 lb ft]), it. Take off the jack and support the lower Control Arm using an appropriate jack for the alignment of the trailing link and the knuckle. Mount the trailing link to knuckle bolt and nut, tightening the trailing link to frame nut to 150 n.m (111 lb ft) and the trailing link to knuckle mounting bolt to 170 n.m (125 lb ft). Reinstall the brake pipe mounting bracket onto the mounting studs and fixture with the retaining nuts tightening them with a torque of 10 n.m (89 lb in). Finally, connect the automatic level control link to the upper Control Arm, re-install the tyre and wheel, and bring the vehicle down.

OEM 2007 Cadillac SRX Trailing Arm

Trailing Control Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Trailing Arms found

View related parts
2007 Cadillac SRX Upper Control Arm, Rear Driver Side Part Number: 15267619
$121.39 MSRP: $199.96
You Save: $78.57 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Rear Axle Control Arm; Suspension Control Arm and Ball Joint Assembly; Control Arm Assembly; Control Arm
- Position: Rear Driver Side
- Replaces: 25766117
- Item Weight: 9.40 Pounds
- Item Dimensions: 5.6 x 19.2 x 17.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15267619
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2007 Cadillac SRX Upper Control Arm, Rear Passenger Side Part Number: 15267620
$124.73 MSRP: $198.03
You Save: $73.30 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Rear Axle Control Arm; Suspension Control Arm and Ball Joint Assembly; Control Arm Assembly; Control Arm
- Position: Rear Passenger Side
- Replaces: 25766118
- Item Weight: 8.90 Pounds
- Item Dimensions: 4.5 x 16.9 x 16.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15267620
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2007 Cadillac SRX Lower Control Arm, Rear Passenger Side Part Number: 25768321
Product Specifications
- Other Name: Arm, Rear Axle Control Arm; Control Arm
- Position: Rear Passenger Side
- Item Weight: 3.70 Pounds
- Item Dimensions: 21.3 x 10.6 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25768321
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2007 Cadillac SRX Trailing Arm, Rear Driver Side Part Number: 25716358
Product Specifications
- Other Name: Arm, Rear Suspension Trailing; Arm, Rear Axle Control Arm
- Position: Rear Driver Side
- Item Weight: 5.00 Pounds
- Item Dimensions: 24.6 x 2.9 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25716358
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2007 Cadillac SRX Trailing Arm, Rear Passenger Side Part Number: 25721399
Product Specifications
- Other Name: Arm, Rear Suspension Trailing; Arm, Rear Axle Control Arm
- Position: Rear Passenger Side
- Item Weight: 4.80 Pounds
- Item Dimensions: 23.9 x 2.8 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25721399
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2007 Cadillac SRX Lower Control Arm, Rear Driver Side Part Number: 25768320
Product Specifications
- Other Name: Arm, Rear Axle Control Arm; Control Arm
- Position: Rear Driver Side
- Item Weight: 2.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25768320
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS

2007 Cadillac SRX Trailing Arm

With a comprehensive array of OEM 2007 Cadillac SRX Trailing Arm, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Cadillac SRX Trailing Arm are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Cadillac SRX Trailing Arm Parts and Q&A

Q: How to replace the trailing arm on 2007 Cadillac SRX?
A: To replace the Trailing Arm lift up and support the vehicle with the tire and the wheel. Unbolt the automatic level control link from the top Control Arm, brake pipe bracket retaining nuts, and remove the brake pipe bracket from the mounting studs. Support the lower Control Arm with an appropriate jack then unknap nut and bolt the leading link to knuckle. After removing the jack, put the frame on a suitable jack and take out the front bolts of the frame in order to bring down the front of the rear frame. Then, remove the trailing link to the frame nut and bolt and pull the trailing link out of the vehicle. Instead for installation, start by disjointing the loosely installation of the trailing link to the vehicle but also disjointing the trailing link to frame bolt and nut. Lift the frame using a suitable jack and bolt the front bolts to the frame, making sure to tighten (265 N.m [195 lb ft]), it. Take off the jack and support the lower Control Arm using an appropriate jack for the alignment of the trailing link and the knuckle. Mount the trailing link to knuckle bolt and nut, tightening the trailing link to frame nut to 150 n.m (111 lb ft) and the trailing link to knuckle mounting bolt to 170 n.m (125 lb ft). Reinstall the brake pipe mounting bracket onto the mounting studs and fixture with the retaining nuts tightening them with a torque of 10 n.m (89 lb in). Finally, connect the automatic level control link to the upper Control Arm, re-install the tyre and wheel, and bring the vehicle down.