How to replace the ABS Control Module on 2007 Cadillac SRX?

Turn ignition off. Raise vehicle; remove air deflector and wheelhouse liner, detaching but not removing washer container bracket. Clean area, unlock and disconnect ABS connector, remove four screws, separate module from BPMV. Install new module, torque to 5 N·m, reconnect, reassemble, lower vehicle, program, clear DTCs, run ABS diagnostic.

OEM 2007 Cadillac SRX ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 ABS Control Module found

View related parts
2007 Cadillac SRX Control Module Part Number: 19153350
Product Specifications
- Other Name: Module Kit, Electronic Brake & Traction Control; ABS Control Module; ABS Control Unit; Module Kit, Electronic Brake Control
- Replaces: 19245474
- Item Weight: 3.10 Pounds
- Item Dimensions: 7.1 x 6.3 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19153350
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS

2007 Cadillac SRX ABS Control Module

With a comprehensive array of OEM 2007 Cadillac SRX ABS Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Cadillac SRX ABS Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Cadillac SRX ABS Control Module Parts and Q&A

Q: How to replace the ABS Control Module on 2007 Cadillac SRX?
A: Turn ignition off. Raise vehicle; remove air deflector and wheelhouse liner, detaching but not removing washer container bracket. Clean area, unlock and disconnect ABS connector, remove four screws, separate module from BPMV. Install new module, torque to 5 N·m, reconnect, reassemble, lower vehicle, program, clear DTCs, run ABS diagnostic.