How to replace the front door hinge on 2006 Chevrolet Impala?

The first step to replace front door hinges involves swinging open the front door then providing support. You should remove all intermediate hinge bolts from the front door hinge until you can move the door to its maximum limit along the rubber conduit. Mark the mounting locations of the front door hinges by using a suitable marker or grease pencil on both surfaces while cleaning the surfaces with a rag. The next process involves removing the front door side hinge bolts before taking out the door side hinge and then replacing the bolts from the body side hinge to uninstall the body side hinge. Mount the bodyside hinge at the alignment marks before tightening its bolts to 33 N.m (24 lb ft). Position the door side hinge onto the body side hinge. Install and tighten the front door hinge bolts when they are at 33 N.m (24 lb ft). Install the hinge bolts on the door side after tightening them to 33 N.m (24 lb ft) then remove the door support. Inspect the door to evaluate proper operation and alignment as the final step.

OEM 2006 Chevrolet Impala Door Hinge

Interior Door Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Door Hinges found

View related parts
2006 Chevrolet Impala Lower Hinge, Front Driver Side Part Number: 22743769
$89.70 MSRP: $140.41
You Save: $50.71 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge, Front Door Lower Hinge; Door Hinge; Hinge, Rear Side Door Lower Hinge
- Position: Front Lower Driver Side
- Replaces: 10445130
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.8 x 4.6 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22743769
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Impala Lower Hinge, Front Passenger Side Part Number: 22743768
$92.44 MSRP: $137.59
You Save: $45.15 (33%)
Product Specifications
- Other Name: Hinge, Front Door Lower Hinge; Door Hinge; Hinge, Rear Side Door Lower Hinge
- Position: Front Lower Passenger Side
- Replaces: 10445129
- Item Weight: 2.20 Pounds
- Item Dimensions: 4.8 x 4.4 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22743768
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Impala Upper Hinge, Front Passenger Side Part Number: 22743771
Product Specifications
- Other Name: Hinge Assembly-Front Side Door Upper; Door Hinge; Hinge, Rear Side Door Upper Hinge; Hinge, Front Door Upper Hinge
- Position: Front Upper Passenger Side
- Replaces: 10323830, 10445131, 20963243, 25937753, 10419282, 10338711, 25774778
- Item Weight: 2.20 Pounds
- Item Dimensions: 4.8 x 4.6 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22743771
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Impala Upper Hinge, Front Driver Side Part Number: 22743770
$95.84 MSRP: $142.65
You Save: $46.81 (33%)
Product Specifications
- Other Name: Hinge Assembly-Front Side Door Upper; Door Hinge; Hinge, Rear Side Door Upper Hinge; Hinge, Front Door Upper Hinge
- Position: Front Upper Driver Side
- Replaces: 10338712, 10445132, 20963242, 10323831, 10419283, 25937752, 25774777
- Item Weight: 2.20 Pounds
- Item Dimensions: 4.8 x 4.6 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22743770
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2006 Chevrolet Impala Door Hinge

With a comprehensive array of OEM 2006 Chevrolet Impala Door Hinge, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Impala Door Hinge are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Impala Door Hinge Parts and Q&A

Q: How to replace the front door hinge on 2006 Chevrolet Impala?
A: The first step to replace front door hinges involves swinging open the front door then providing support. You should remove all intermediate hinge bolts from the front door hinge until you can move the door to its maximum limit along the rubber conduit. Mark the mounting locations of the front door hinges by using a suitable marker or grease pencil on both surfaces while cleaning the surfaces with a rag. The next process involves removing the front door side hinge bolts before taking out the door side hinge and then replacing the bolts from the body side hinge to uninstall the body side hinge. Mount the bodyside hinge at the alignment marks before tightening its bolts to 33 N.m (24 lb ft). Position the door side hinge onto the body side hinge. Install and tighten the front door hinge bolts when they are at 33 N.m (24 lb ft). Install the hinge bolts on the door side after tightening them to 33 N.m (24 lb ft) then remove the door support. Inspect the door to evaluate proper operation and alignment as the final step.