ChevyParts
My Garage
My Account
Cart
OEM 2006 Chevrolet HHR Oxygen Sensor
Oxygen O2 Sensor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Oxygen Sensors found
2006 Chevrolet HHR Oxygen Sensor Part Number: 12578576
$84.49 MSRP: $171.60You Save: $87.11 (51%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Sensor, Computer Control Sensors; Rear Oxygen Sensor
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.4 x 3.4 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12578576
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2006 Chevrolet HHR Oxygen Sensor Part Number: 12602047
$43.51 MSRP: $135.76You Save: $92.25 (68%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Sensor Assembly-Heated Oxygen (Position 1); Front Oxygen Sensor; Sensor, Computer Control Sensors
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.4 x 3.1 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12602047
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2006 Chevrolet HHR Oxygen Sensor Part Number: 12580827
$65.84 MSRP: $133.72You Save: $67.88 (51%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Sensor Assembly-Heated Oxygen (Position 1); Front Oxygen Sensor; Sensor, Computer Control Sensors
- Item Weight: 1.70 Pounds
- Item Dimensions: 8.4 x 3.3 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12580827
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2006 Chevrolet HHR Oxygen Sensor
With a comprehensive array of OEM 2006 Chevrolet HHR Oxygen Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet HHR Oxygen Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2006 Chevrolet HHR Oxygen Sensor Parts and Q&A
- Q: How to replace the heated oxygen sensor (HO2S) at Position 1 on 2006 Chevrolet HHR?A: The first step to replace a heated Oxygen Sensor (HO2S) at position 1 requires the removal of the exhaust manifold heat shield. Automatic transaxle owners need to remove their connector position assurance (CPA) retainer before disconnecting the engine harness electrical connector which serves the ho2s. Individuals with manual transaxles should both detach the cpa retainer along with removing the engine harness electrical connector from the ho2s. First disconnect the ho2s electrical connector clip at the Thermostat Housing before unscrewing the ho2s itself and removing it. Installation of the ho2s requires the application of anti-seize compound gm p/n 12377953 or equivalent to threads when reinstalling an aged sensor to improve future sensor removal. Tighten the installed ho2s to 42 n.m (31 lb ft). Connect the ho2s to the engine harness electrical connector for manual transaxles and then attach the cpa retainer. Automatic transaxle users must attach the engine harness electrical connector to an ho2s then put in the cpa retainer. As a final step, attach the ho2s electrical connector clip to the Thermostat Housing before putting back the exhaust manifold heat shield.
Related 2006 Chevrolet HHR Parts
2006 Chevrolet HHR Camshaft Position Sensor
2006 Chevrolet HHR Crankshaft Position Sensor
2006 Chevrolet HHR Coolant Temperature Sensor
2006 Chevrolet HHR Engine Control Module
2006 Chevrolet HHR Igniter
2006 Chevrolet HHR Ignition Coil
2006 Chevrolet HHR Ignition Coil Boot
2006 Chevrolet HHR Ignition Control Module
2006 Chevrolet HHR MAP Sensor
2006 Chevrolet HHR Spark Plug
2006 Chevrolet HHR Vehicle Speed Sensor
2006 Chevrolet HHR Wheel Speed Sensor