How to replace the Crankshaft Position Sensor on 2006 Chevrolet HHR?

To replace Crankshaft Position (CKP) sensor, you should disconnect the plug connector of CKP sensor, then unfasten the CKP sensor bolt and get the CKP sensor. Prior to installation, check the CKP sensor O-ring against its tightness and then lubricate it with a mineral-based grease. Slightly place the CKP sensor into the block and install the CKP sensor bolt with a torque of 10 N.m (89 lb in). Finally, connect the CKP sensor electrical connector and follow CKP system variation learn procedure.

OEM 2006 Chevrolet HHR Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Position Sensor found

View related parts
2006 Chevrolet HHR Crankshaft Position Sensor, Green Line Part Number: 12588992
$33.33 MSRP: $62.60
You Save: $29.27 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor
- Replaced by: 12674703
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.1 x 2.3 x 1.1 inches
- Condition: New
- SKU: 12588992
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS

2006 Chevrolet HHR Crankshaft Position Sensor

With a comprehensive array of OEM 2006 Chevrolet HHR Crankshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet HHR Crankshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet HHR Crankshaft Position Sensor Parts and Q&A

Q: How to replace the Crankshaft Position Sensor on 2006 Chevrolet HHR?
A: To replace Crankshaft Position (CKP) sensor, you should disconnect the plug connector of CKP sensor, then unfasten the CKP sensor bolt and get the CKP sensor. Prior to installation, check the CKP sensor O-ring against its tightness and then lubricate it with a mineral-based grease. Slightly place the CKP sensor into the block and install the CKP sensor bolt with a torque of 10 N.m (89 lb in). Finally, connect the CKP sensor electrical connector and follow CKP system variation learn procedure.