How to replace the Crankshaft Position Sensor on 2007 Chevrolet HHR?

Removal of the starter and the electrical connector of the CKP sensor are required in order to replace the Crankshaft Position Sensor. Removal The CKP sensor has an O-ring which is lubricated and should be checked. Reconnect the electrical connector, reattach the CKP sensor, reconnect the bolt and put the starter back in place. Carry out the CKP system variation learn process.

OEM 2007 Chevrolet HHR Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Position Sensor found

View related parts
2007 Chevrolet HHR Crankshaft Position Sensor, Green Line Part Number: 12588992
$33.33 MSRP: $62.60
You Save: $29.27 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor
- Replaced by: 12674703
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.1 x 2.3 x 1.1 inches
- Condition: New
- SKU: 12588992
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS

2007 Chevrolet HHR Crankshaft Position Sensor

With a comprehensive array of OEM 2007 Chevrolet HHR Crankshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet HHR Crankshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet HHR Crankshaft Position Sensor Parts and Q&A

Q: How to replace the Crankshaft Position Sensor on 2007 Chevrolet HHR?
A: Removal of the starter and the electrical connector of the CKP sensor are required in order to replace the Crankshaft Position Sensor. Removal The CKP sensor has an O-ring which is lubricated and should be checked. Reconnect the electrical connector, reattach the CKP sensor, reconnect the bolt and put the starter back in place. Carry out the CKP system variation learn process.