OEM 2006 Chevrolet HHR Alternator

2006 Chevrolet HHR Alternator Parts and Q&A

• Q: How to replace the alternator on 2006 Chevrolet HHR?

  A: Start by disconnecting the negative Battery Cable and then remove the Drive Belt before replacing the Alternator. After disconnecting the generator electrical connector remove the air cleaner assembly before relocating the engine harness boot whenever required. Start by taking off the generator terminal nut and engine harness terminal attached to the generator and finish by removing generator bolts before extracting the generator. Open the space by placing the generator against the engine block then bolt it into position while tightening the bolts to 22 n.m (16 lb ft). After connecting the engine harness terminal to the generator mount the generator terminal nut with a torque setting of 20 n.m (15 lb ft). Place the engine harness boot into its correct position and hook up the generator electrical connector. Reshuffling the air cleaner assembly, install the Drive Belt while also reattaching the negative Battery Cable.