How to replace the engine oil and oil filter on 2006 Chevrolet Cobalt?

The proper replacement of an engine oil and Oil Filter begins with putting the vehicle on a suitable stand while elevating it. A drain pan needs placement beneath the oil Drain Plug before removing this plug to allow total oil drainage. You should install the oil pan Drain Plug while using a torque of 25 nm (18 ft. Lbs.). A 32 mm (1 1/4 inch) socket or an Oil Filter wrench must be utilized for Oil Filter cap removal by gripping the outside diameter and never use an open-end wrench on the hex. Start the procedure by unscrewing the Oil Filter and filter cap before breaking the filter free from the cap. Start by mounting a freshly installed Oil Filter to the cap before inserting both the cap and filter. Apply a torque of 25 nm (18 ft. Lbs.) maximum to the Oil Filter cap since excessive force could cause damage which leads to leaking oil; properly seat the cap. Lower the vehicle after securing a new filter in position and carry out oil engine filling.

OEM 2006 Chevrolet Cobalt Oil Filter

Engine Oil filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oil Filters found

View related parts
2006 Chevrolet Cobalt Oil Filter, Green Line Part Number: 12605566
$16.34 MSRP: $29.18
You Save: $12.84 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter, Engine Oil Filter; Filter Change Maintenance Kit; Filter Element; Element; Filter; Engine Oil Filter
- Replaces: 24460713, 12579143, 88917138
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.7 x 2.7 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12605566
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2006 Chevrolet Cobalt Oil Filter Part Number: 12605565
$10.99 MSRP: $19.64
You Save: $8.65 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter, Engine Oil Filter; Filter Change Maintenance Kit; Oil Filter Housing; Filter Housing; Filter Assembly; Engine Oil Filter
- Replaced by: 12737844
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.2 x 3.6 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12605565
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

2006 Chevrolet Cobalt Oil Filter

With a comprehensive array of OEM 2006 Chevrolet Cobalt Oil Filter, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Cobalt Oil Filter are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Cobalt Oil Filter Parts and Q&A

Q: How to replace the engine oil and oil filter on 2006 Chevrolet Cobalt?
A: The proper replacement of an engine oil and Oil Filter begins with putting the vehicle on a suitable stand while elevating it. A drain pan needs placement beneath the oil Drain Plug before removing this plug to allow total oil drainage. You should install the oil pan Drain Plug while using a torque of 25 nm (18 ft. Lbs.). A 32 mm (1 1/4 inch) socket or an Oil Filter wrench must be utilized for Oil Filter cap removal by gripping the outside diameter and never use an open-end wrench on the hex. Start the procedure by unscrewing the Oil Filter and filter cap before breaking the filter free from the cap. Start by mounting a freshly installed Oil Filter to the cap before inserting both the cap and filter. Apply a torque of 25 nm (18 ft. Lbs.) maximum to the Oil Filter cap since excessive force could cause damage which leads to leaking oil; properly seat the cap. Lower the vehicle after securing a new filter in position and carry out oil engine filling.