How to replace the rack and pinion boot and breather tube using the J 22610 Keystone Clamp Pliers on 2006 Buick Rendezvous?

Using J 22610 Keystone Clamp Pliers, remove the outer tie rod and hexagon jam nut, then detach clamps and take off the rack-and-pinion boot and breather tube, marking its position. Grease components, fit new boot, align breather tube, crimp clamps with J 22610, reinstall tie-rod jam nut.

OEM 2006 Buick Rendezvous Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Rack and Pinion Boot found

View related parts
2006 Buick Rendezvous Tie Rod Boot Part Number: 21011025
Product Specifications
- Other Name: Boot Kit, Steering Tie Rod; Power Steering Cylinder; Rack and Pinion Bellows Kit; Rack & Pinion Boot.; Inner Tie Rod Boot; Boot Kit; Boot; Boot Kit, Tie Rod End Dust
- Item Weight: 0.80 Pounds
- Item Dimensions: 12.0 x 4.3 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 21011025
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS

2006 Buick Rendezvous Rack and Pinion Boot

With a comprehensive array of OEM 2006 Buick Rendezvous Rack and Pinion Boot, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Buick Rendezvous Rack and Pinion Boot are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Buick Rendezvous Rack and Pinion Boot Parts and Q&A

Q: How to replace the rack and pinion boot and breather tube using the J 22610 Keystone Clamp Pliers on 2006 Buick Rendezvous?
A: Using J 22610 Keystone Clamp Pliers, remove the outer tie rod and hexagon jam nut, then detach clamps and take off the rack-and-pinion boot and breather tube, marking its position. Grease components, fit new boot, align breather tube, crimp clamps with J 22610, reinstall tie-rod jam nut.