How to replace the cruise control module on 2005 Chevrolet Silverado 1500?

The first step to replacing the cruise control module is to take out the upper fender brace bolts and after that, the upper fender brace. Then, you should take off the electrical connector from the cruise control module and undo the module's nuts. Release the cruise control cable from the module and after that, take the cruise control module out. When you are installation, place the cruise control module first and then attach the cruise control cable to it. Attach the nuts to the module and tighten them to 9 N.m (80 lb in), and then attach the electrical connector. At the end, install the upper fender brace again and fasten it with the bolts, be sure to tighten them to 9 N.m (80 lb in).

OEM 2005 Chevrolet Silverado 1500 Cruise Control Module

Cruise Control Module Speed Control

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Cruise Control Module found

View related parts
2005 Chevrolet Silverado 1500 Control Module Part Number: 25351423
Product Specifications
- Other Name: Module, Cruise Control; Cruise Control Module; Module
- Item Weight: 2.30 Pounds
- Item Dimensions: 4.2 x 5.6 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25351423
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Silverado 1500 Submodels:
- Base, LS, LT, WT | 6 Cyl 4.3 L GAS

2005 Chevrolet Silverado 1500 Cruise Control Module

With a comprehensive array of OEM 2005 Chevrolet Silverado 1500 Cruise Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Silverado 1500 Cruise Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Silverado 1500 Cruise Control Module Parts and Q&A

Q: How to replace the cruise control module on 2005 Chevrolet Silverado 1500?
A: The first step to replacing the cruise control module is to take out the upper fender brace bolts and after that, the upper fender brace. Then, you should take off the electrical connector from the cruise control module and undo the module's nuts. Release the cruise control cable from the module and after that, take the cruise control module out. When you are installation, place the cruise control module first and then attach the cruise control cable to it. Attach the nuts to the module and tighten them to 9 N.m (80 lb in), and then attach the electrical connector. At the end, install the upper fender brace again and fasten it with the bolts, be sure to tighten them to 9 N.m (80 lb in).