How to replace the Camshaft Position Sensor on 2005 Chevrolet Blazer?

In order to change the Camshaft Position (CMP) Sensor, unconnect the spark plug wires and the ignition coil wire, and then the CMP sensor harness. Take out distributor cap and rotor. Align the reluctor wheel to the CMP sensor, and then install a new CMP sensor along with new screws. Use new screws and reconnect the wires.

OEM 2005 Chevrolet Blazer Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
2005 Chevrolet Blazer Camshaft Position Sensor Part Number: 19417445
$69.96 MSRP: $124.92
You Save: $54.96 (44%)
Product Specifications
- Other Name: Sensor Assembly, Camshaft Position (Kit); Engine Camshaft Position Sensor; Camshaft Sensor; Cam Sensor; Position Sensor; Switch; Sensor, Distributor (Also Knock Sensor)
- Replaces: 10490645, 10485432
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.4 x 2.7 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19417445
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Blazer Submodels:
- Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS

2005 Chevrolet Blazer Camshaft Position Sensor

With a comprehensive array of OEM 2005 Chevrolet Blazer Camshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Blazer Camshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Blazer Camshaft Position Sensor Parts and Q&A

Q: How to replace the Camshaft Position Sensor on 2005 Chevrolet Blazer?
A: In order to change the Camshaft Position (CMP) Sensor, unconnect the spark plug wires and the ignition coil wire, and then the CMP sensor harness. Take out distributor cap and rotor. Align the reluctor wheel to the CMP sensor, and then install a new CMP sensor along with new screws. Use new screws and reconnect the wires.