How to replace the Ignition Control Module on 2005 Chevrolet Blazer?

In order to replace the ignition control module, one has to disconnect the electrical connector, loosen the screws holding the module in place and heat sink, and remove. To install them, place them back to the bracket again with the screws but tighten them according to the Fastener Notice. Lastly, re-attach the electrical connectors.

OEM 2005 Chevrolet Blazer Ignition Control Module

Ignition Spark Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Control Module found

View related parts
2005 Chevrolet Blazer Control Module Part Number: 10482803
$134.05 MSRP: $275.46
You Save: $141.41 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module, Electronic Ignition Control (W/O Coil); Ignition Control Module; Ignition Module; ESC Control Module; Coil Module; Module
- Replaced by: 19435467
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.7 x 2.2 x 1.8 inches
- Condition: New
- SKU: 10482803
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Blazer Submodels:
- Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS

2005 Chevrolet Blazer Ignition Control Module

With a comprehensive array of OEM 2005 Chevrolet Blazer Ignition Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Blazer Ignition Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Blazer Ignition Control Module Parts and Q&A

Q: How to replace the Ignition Control Module on 2005 Chevrolet Blazer?
A: In order to replace the ignition control module, one has to disconnect the electrical connector, loosen the screws holding the module in place and heat sink, and remove. To install them, place them back to the bracket again with the screws but tighten them according to the Fastener Notice. Lastly, re-attach the electrical connectors.