How to replace the RH exhaust heat shield (LP1, LY7) on 2005 Cadillac CTS?

The first step for replacing the right exhaust manifold heat shield (LP1, LY7) involves removing upper exhaust manifold heat shield bolts. After that elevate the vehicle and implement proper support. Begin by removing the lower bolt which secures the exhaust manifold heat shield. After that remove the heat shield from the location. The lower exhaust manifold heat shield retainers and lower exhaust manifold heat shield must also be uninstalled when needed. The first step for installation should involve the lower exhaust manifold heat shield together with its retainers. AdapterManager should install the exhaust manifold heat shield followed by secure bolting of the lower attachment point without full torque application. After lowering the vehicle you should install the upper bolts of the exhaust manifold heat shield while tightening them to 10 Nm (89 inch lbs.). After raising and supporting the vehicle you should tighten the lower bolt to 10 Nm (89 inch lbs.) before completely lowering the vehicle down.

OEM 2005 Cadillac CTS Exhaust Heat Shield

Heat Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Exhaust Heat Shields found

View related parts
2005 Cadillac CTS Heat Shield, Driver Side Part Number: 12578032
$12.73 MSRP: $18.96
You Save: $6.23 (33%)
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Position: Driver Side
- Item Weight: 2.00 Pounds
- Item Dimensions: 17.7 x 7.7 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12578032
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Cadillac CTS Submodels:
- V | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
2005 Cadillac CTS Heat Shield, Passenger Side Part Number: 12578031
$8.83 MSRP: $13.13
You Save: $4.30 (33%)
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Position: Passenger Side
- Item Weight: 1.10 Pounds
- Item Dimensions: 18.2 x 8.8 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12578031
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Cadillac CTS Submodels:
- V | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
2005 Cadillac CTS Heat Shield Part Number: 12617267
Product Specifications
- Other Name: Shield, Exhaust Manifold; Exhaust Heat Shield
- Replaces: 12580707
- Item Weight: 2.10 Pounds
- Item Dimensions: 14.6 x 8.0 x 7.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12617267
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Cadillac CTS Submodels:
- Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.6 L GAS
View related parts
2005 Cadillac CTS Heat Shield Part Number: 12580706
Product Specifications
- Other Name: Shield, Exhaust Manifold; Exhaust Heat Shield
- Item Weight: 2.00 Pounds
- Item Dimensions: 13.5 x 6.7 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12580706
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Cadillac CTS Submodels:
- Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.6 L GAS

2005 Cadillac CTS Exhaust Heat Shield

With a comprehensive array of OEM 2005 Cadillac CTS Exhaust Heat Shield, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Cadillac CTS Exhaust Heat Shield are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Cadillac CTS Exhaust Heat Shield Parts and Q&A

Q: How to replace the RH exhaust heat shield (LP1, LY7) on 2005 Cadillac CTS?
A: The first step for replacing the right exhaust manifold heat shield (LP1, LY7) involves removing upper exhaust manifold heat shield bolts. After that elevate the vehicle and implement proper support. Begin by removing the lower bolt which secures the exhaust manifold heat shield. After that remove the heat shield from the location. The lower exhaust manifold heat shield retainers and lower exhaust manifold heat shield must also be uninstalled when needed. The first step for installation should involve the lower exhaust manifold heat shield together with its retainers. AdapterManager should install the exhaust manifold heat shield followed by secure bolting of the lower attachment point without full torque application. After lowering the vehicle you should install the upper bolts of the exhaust manifold heat shield while tightening them to 10 Nm (89 inch lbs.). After raising and supporting the vehicle you should tighten the lower bolt to 10 Nm (89 inch lbs.) before completely lowering the vehicle down.