How to replace the ignition coil on 2004 Buick LeSabre?

Flow the Ignition Coil replacement process by starting with turning off the Ignition Switch. Start by turning off the ignition then write down plug wire order before removing the wires from coil assemblies. Use a screwdriver to undo the screws that fasten coil assemblies onto the ignition control module (ICM). Next remove the coils from their position within the icm. Position the coils on the icm while making sure electrical terminals remain unbent. Install the Ignition Coil attaching screws at a torque setting of 4.5 n.m (40 lb in) while completing the assembly. Reinstall Spark Plug Wires to their original positions on the coil assemblies.

OEM 2004 Buick LeSabre Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Coil found

View related parts
2004 Buick LeSabre Ignition Coil Part Number: 19418991
$52.41 MSRP: $107.70
You Save: $55.29 (52%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Coil Assembly, Ignition; Coil Assembly; Coil; Coil, Ignition Coil
- Replaces: 10472401, 10482928, 19353734
- Condition: New
- SKU: 19418991
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2004 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS

2004 Buick LeSabre Ignition Coil

With a comprehensive array of OEM 2004 Buick LeSabre Ignition Coil, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Buick LeSabre Ignition Coil are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Buick LeSabre Ignition Coil Parts and Q&A

Q: How to replace the ignition coil on 2004 Buick LeSabre?
A: Flow the Ignition Coil replacement process by starting with turning off the Ignition Switch. Start by turning off the ignition then write down plug wire order before removing the wires from coil assemblies. Use a screwdriver to undo the screws that fasten coil assemblies onto the ignition control module (ICM). Next remove the coils from their position within the icm. Position the coils on the icm while making sure electrical terminals remain unbent. Install the Ignition Coil attaching screws at a torque setting of 4.5 n.m (40 lb in) while completing the assembly. Reinstall Spark Plug Wires to their original positions on the coil assemblies.