How to replace the steering knuckle on 2003 Buick Rendezvous?

To change the Steering Knuckle have initially the vehicle to be raised properly and supported. Once the tire and wheel assembly has been removed, next comes the front wheel drive shaft bearing. Subsequently, disconnect the front lower control arm ball stud and take out the outer Tie Rod End from Steering Knuckle. Scribe the strut to the knuckle and then take off the bolts that are connecting the strut to the knuckle before taking off the knuckle from the vehicle. To install, start by installing the knuckle back to the vehicle. Mount the bolts that join to the strut to the knuckle, making sure to tighten them up to 123 nm (90 ft. Lbs.). Remove the adapter washer to fit and replace then remove the top nut, lock washer and nut then washers and nut to the Steering Knuckle not the strut. The ball stud now goes on the front lower control arm knob to the knuckle steer the wheel drive shaft bearing then reattach the outer tie rod to the Steering Knuckle and the front bottom then lower. Lastly, reinstall the tire and wheel assemy and lower the vehicle. There is a list of tools that are needed for this procedure including the j24319-b universal steering linkage puller.

OEM 2003 Buick Rendezvous Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Steering Knuckles found

View related parts
2003 Buick Rendezvous Knuckle, Driver Side Part Number: 23127629
$268.88 MSRP: $442.93
You Save: $174.05 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering (Machining); Knuckle, Steering
- Position: Driver Side
- Replaces: 18060638, 18060652, 88955418, 10434254, 18060680, 20899802, 25816684, 22990752
- Item Weight: 5.10 Pounds
- Item Dimensions: 5.9 x 12.9 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 23127629
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
2003 Buick Rendezvous Knuckle, Passenger Side Part Number: 22990753
$265.66 MSRP: $421.79
You Save: $156.13 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering (Machining)
- Position: Passenger Side
- Replaced by: 23127630
- Item Weight: 5.20 Pounds
- Item Dimensions: 5.4 x 13.1 x 12.6 inches
- Condition: New
- SKU: 22990753
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
2003 Buick Rendezvous Knuckle, Rear Driver Side Part Number: 18060684
Product Specifications
- Other Name: Knuckle, Rear Wheel
- Position: Rear Driver Side
- Item Weight: 5.30 Pounds
- Item Dimensions: 11.8 x 11.2 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18060684
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
2003 Buick Rendezvous Knuckle, Rear Passenger Side Part Number: 18060685
Product Specifications
- Other Name: Knuckle, Rear Wheel
- Position: Rear Passenger Side
- Item Weight: 5.50 Pounds
- Item Dimensions: 11.4 x 11.7 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18060685
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS

2003 Buick Rendezvous Steering Knuckle

With a comprehensive array of OEM 2003 Buick Rendezvous Steering Knuckle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Buick Rendezvous Steering Knuckle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Buick Rendezvous Steering Knuckle Parts and Q&A

Q: How to replace the steering knuckle on 2003 Buick Rendezvous?
A: To change the Steering Knuckle have initially the vehicle to be raised properly and supported. Once the tire and wheel assembly has been removed, next comes the front wheel drive shaft bearing. Subsequently, disconnect the front lower control arm ball stud and take out the outer Tie Rod End from Steering Knuckle. Scribe the strut to the knuckle and then take off the bolts that are connecting the strut to the knuckle before taking off the knuckle from the vehicle. To install, start by installing the knuckle back to the vehicle. Mount the bolts that join to the strut to the knuckle, making sure to tighten them up to 123 nm (90 ft. Lbs.). Remove the adapter washer to fit and replace then remove the top nut, lock washer and nut then washers and nut to the Steering Knuckle not the strut. The ball stud now goes on the front lower control arm knob to the knuckle steer the wheel drive shaft bearing then reattach the outer tie rod to the Steering Knuckle and the front bottom then lower. Lastly, reinstall the tire and wheel assemy and lower the vehicle. There is a list of tools that are needed for this procedure including the j24319-b universal steering linkage puller.