How to replace the blower motor resistor assembly (C60) on 2002 Chevrolet S10?

You need to avoid grounding the metal coils of the blower resistor against any metal parts to protect its internal components. First disassemble the control Relay bracket with the Relay then disconnect the blower resistor wiring. Unscrew your hand for access to the ip and then remove the Blower Motor Resistor mounting screw. Use a sharp utility knife to cut a square opening in the case where you will find three attaching screws on the access cover. Insert the new Blower Motor Resistor assembly and fasten it with its mounting screw at 1.9 n.m tightness setting. Run black weather-strip adhesive along the cut-line edges until it sets up for 15 minutes to form a skin. Reposition the stud and connect the resistor harness before putting in the a/c Relay bracket.

OEM 2002 Chevrolet S10 Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor Resistor found

View related parts
2002 Chevrolet S10 Resistor Part Number: 15094285
$24.76 MSRP: $46.50
You Save: $21.74 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Resistor, Blower Motor; Blower Motor Resistor; Resistor, A/C Evaporator Blower; Resistor, Heater Blower Motor
- Replaces: 15652873
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.4 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15094285
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet S10 Submodels:
- Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS

2002 Chevrolet S10 Blower Motor Resistor

With a comprehensive array of OEM 2002 Chevrolet S10 Blower Motor Resistor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet S10 Blower Motor Resistor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet S10 Blower Motor Resistor Parts and Q&A

Q: How to replace the blower motor resistor assembly (C60) on 2002 Chevrolet S10?
A: You need to avoid grounding the metal coils of the blower resistor against any metal parts to protect its internal components. First disassemble the control Relay bracket with the Relay then disconnect the blower resistor wiring. Unscrew your hand for access to the ip and then remove the Blower Motor Resistor mounting screw. Use a sharp utility knife to cut a square opening in the case where you will find three attaching screws on the access cover. Insert the new Blower Motor Resistor assembly and fasten it with its mounting screw at 1.9 n.m tightness setting. Run black weather-strip adhesive along the cut-line edges until it sets up for 15 minutes to form a skin. Reposition the stud and connect the resistor harness before putting in the a/c Relay bracket.