How to replace the blower motor resistor assembly with RPO Code C60 on 2003 Chevrolet S10?

To change the blower motor resistor assembly to RPAC60, make sure that the metal coils are not grounded to any surface. Eliminate A/C control relay bracket and harness of blower resistor. Removal of access cover with the screws, installing the new assembly and fixing it. Use glue and ensure that it dries and then reattach parts.

OEM 2003 Chevrolet S10 Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor Resistor found

View related parts
2003 Chevrolet S10 Resistor Part Number: 15094285
$24.76 MSRP: $46.50
You Save: $21.74 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Resistor, Blower Motor; Blower Motor Resistor; Resistor, A/C Evaporator Blower; Resistor, Heater Blower Motor
- Replaces: 15652873
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.4 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15094285
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet S10 Submodels:
- Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS

2003 Chevrolet S10 Blower Motor Resistor

With a comprehensive array of OEM 2003 Chevrolet S10 Blower Motor Resistor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Chevrolet S10 Blower Motor Resistor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Chevrolet S10 Blower Motor Resistor Parts and Q&A

Q: How to replace the blower motor resistor assembly with RPO Code C60 on 2003 Chevrolet S10?
A: To change the blower motor resistor assembly to RPAC60, make sure that the metal coils are not grounded to any surface. Eliminate A/C control relay bracket and harness of blower resistor. Removal of access cover with the screws, installing the new assembly and fixing it. Use glue and ensure that it dries and then reattach parts.