How to replace the steering wheel on 2002 Chevrolet Malibu?

Begin Steering Column replacement by disabling the supplemental inflatable restraint (SIR) system before removing Steering Wheel and trim covers. Disconnect all electrical connectors that are attached to the multifunction switch and remove the electrical harness from the Steering Column area. Move on to remove both the sir coil and the driver's insulator panel from the vehicle. Work starts with removing the upper pinch bolt attached to the intermediate shaft. Then proceed to take out lower Steering Column mounting bolts and upper mounting bolts. Steering columns become damage-prone after removal so exercise caution at all times. Avoid dropping it or hammering on the end of the shaft to protect the collapsible design of the component. Install the new Steering Column into the vehicle while first tightening the lower fasteners before moving on to tighten the upper fasteners for safety. Tighten the lower mounting nuts on the Steering Column at 26 nm (19 ft. Lbs.) and upper mounting bolts at the same torque rating. Firmly connect the intermediate shaft's upper pinch bolt using a 22 nm torque (16 ft. Lbs.). Reposition the sir coil then hook up electrical connectors to the multifunction switch while reattaching the electrical harness to the Steering Column. Complete the installation by putting back the trim covers and driver insulator panel along with the Steering Wheel before you enable the sir system.

OEM 2002 Chevrolet Malibu Steering Wheel

Navigation Steering Wheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Steering Wheels found

View related parts
2002 Chevrolet Malibu Wheel Part Number: 22622837
Product Specifications
- Other Name: Wheel, Steering
- Item Weight: 3.30 Pounds
- Item Dimensions: 15.8 x 16.1 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22622837
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Malibu Submodels:
- Base, LS | 6 Cyl 3.1 L GAS
View related parts
2002 Chevrolet Malibu Steering Wheel Part Number: 22605434
Product Specifications
- Other Name: Wheel, Steering; Wheel
- Item Weight: 3.30 Pounds
- Item Dimensions: 16.1 x 15.4 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22605434
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Malibu Submodels:
- Base, LS | 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
View related parts
2002 Chevrolet Malibu Steering Wheel Part Number: 22622836
Product Specifications
- Other Name: Wheel, Steering; Wheel
- Item Weight: 4.40 Pounds
- Item Dimensions: 18.1 x 16.9 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22622836
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Malibu Submodels:
- Base, LS | 6 Cyl 3.1 L GAS
View related parts
2002 Chevrolet Malibu Steering Wheel Part Number: 22605432
Product Specifications
- Other Name: Wheel, Steering; Wheel
- Item Weight: 4.60 Pounds
- Item Dimensions: 18.4 x 9.2 x 17.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22605432
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Malibu Submodels:
- Base, LS | 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
View related parts
2002 Chevrolet Malibu Wheel Part Number: 22605430
Product Specifications
- Other Name: Wheel, Steering
- Item Weight: 4.60 Pounds
- Item Dimensions: 18.1 x 17.0 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22605430
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Malibu Submodels:
- Base, LS | 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
View related parts
2002 Chevrolet Malibu Steering Wheel, Oak Part Number: 22622835
Product Specifications
- Other Name: Wheel Assembly-Steering *Oak; Wheel; Wheel, Steering
- Item Weight: 2.90 Pounds
- Item Dimensions: 18.7 x 17.4 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22622835
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Malibu Submodels:
- Base, LS | 6 Cyl 3.1 L GAS

2002 Chevrolet Malibu Steering Wheel

With a comprehensive array of OEM 2002 Chevrolet Malibu Steering Wheel, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Malibu Steering Wheel are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Malibu Steering Wheel Parts and Q&A

Q: How to replace the steering wheel on 2002 Chevrolet Malibu?
A: Begin Steering Column replacement by disabling the supplemental inflatable restraint (SIR) system before removing Steering Wheel and trim covers. Disconnect all electrical connectors that are attached to the multifunction switch and remove the electrical harness from the Steering Column area. Move on to remove both the sir coil and the driver's insulator panel from the vehicle. Work starts with removing the upper pinch bolt attached to the intermediate shaft. Then proceed to take out lower Steering Column mounting bolts and upper mounting bolts. Steering columns become damage-prone after removal so exercise caution at all times. Avoid dropping it or hammering on the end of the shaft to protect the collapsible design of the component. Install the new Steering Column into the vehicle while first tightening the lower fasteners before moving on to tighten the upper fasteners for safety. Tighten the lower mounting nuts on the Steering Column at 26 nm (19 ft. Lbs.) and upper mounting bolts at the same torque rating. Firmly connect the intermediate shaft's upper pinch bolt using a 22 nm torque (16 ft. Lbs.). Reposition the sir coil then hook up electrical connectors to the multifunction switch while reattaching the electrical harness to the Steering Column. Complete the installation by putting back the trim covers and driver insulator panel along with the Steering Wheel before you enable the sir system.