OEM 2002 Buick Rendezvous Ignition Control Module

Ignition Spark Control Module
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Control Module found

  • 2002 Buick Rendezvous Ignition Control Module Diagram - 19245557
    View related parts

    2002 Buick Rendezvous Control Module Part Number: 19245557

    $221.80 MSRP: $455.78
    You Save: $233.98 (52%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Module Assembly, Electronic Ignition Control (W/O Coil); Ignition Control Module; Ignition Module; Coil Module; Module; Bracket, Distributor (Also Knock Sensor); Module, Distributor (Also Knock Sensor)
    • Replaces: 10489422
    • Item Weight: 1.00 Pounds
    • Item Dimensions: 7.8 x 4.7 x 1.7 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 19245557
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2002 Buick Rendezvous Submodels:
    • CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS

2002 Buick Rendezvous Ignition Control Module

With a comprehensive array of OEM 2002 Buick Rendezvous Ignition Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Buick Rendezvous Ignition Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Buick Rendezvous Ignition Control Module Parts and Q&A

  • Q: How to service the Ignition Control Module on 2002 Buick Rendezvous?
    A: Before servicing the Ignition Control Module begin by disconnecting all electrical connectors at the icm while noting the spark plug wire positions before unclipping them from the ignition coils. The coil assemblies attach to the Ignition Control Module through screws that need removal before disconnecting the coils from their position. Start by removing the fasteners that keep the Ignition Control Module assembly fixed to the engine then extract the entire module from its bracket. Place the Ignition Control Module back on its bracket then mount the coils onto the module. Reinstall the fasteners which attach the Ignition Control Module assembly to the engine using the instructions in the service precautions section for safe fastener installation. Next install the screws by torquing them to 4.5 n.m (40 lb in). To finish the process connect the Spark Plug Wires following the removal sequence while also attaching the electrical connectors to the Ignition Control Module.

Related 2002 Buick Rendezvous Parts