How to service the lower ball joint on 2001 GMC Jimmy?

Start servicing the lower Ball Joint by raising and supporting the vehicle before taking off its tire and wheel components. After taking off the Torsion Bar you should remove the wheel drive shaft from its position. Start with a 3.175mm (1/8 inch) drill to make a 6.35mm (1/4 inch) deep hole at the center of lower Ball Joint rivet. Shift to a 12.7mm (1/2 inch) drill to remove the rivet heads. Push the pin punch through each rivet to unfasten them before taking the lower Ball Joint out of the Control Arm. Slip the lower Ball Joint onto its position on the lower Control Arm while keeping to the fastener notice instructions. Connect the lower Ball Joint bolts and nuts then tighten them to 23 nm (17 ft. Lbs.) torque. Put the wheel drive shaft back and position the Torsion Bar before putting tire and wheel together. After putting the vehicle down end to end check the front wheel alignment.

OEM 2001 GMC Jimmy Ball Joint

Control Arm Joint

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Ball Joints found

View related parts
2001 GMC Jimmy Ball Joint, Front Upper Part Number: 88911387
$34.06 MSRP: $60.81
You Save: $26.75 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint Kit, Front Upper Control Arm Ball; Suspension Ball Joint; Upper Ball Joint; Stud Kit, Steering Knuckle Control Arm; Ball Joint Kit
- Position: Front Upper
- Replaced by: 19460397
- Item Weight: 1.80 Pounds
- Item Dimensions: 4.3 x 4.0 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 88911387
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 GMC Jimmy Submodels:
- Base, Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
2001 GMC Jimmy Lower Ball Joint Part Number: 88967425
$65.21 MSRP: $107.41
You Save: $42.20 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stud Kit, Front Lower Control Arm Ball; Suspension Ball Joint; Ball Joint; Stud Kit, Steering Knuckle Lower Control Arm Pivot; Stud, Steering Knuckle Lower Control Arm Pivot
- Position: Front Lower
- Replaces: 22156908, 17980954
- Item Weight: 1.70 Pounds
- Item Dimensions: 7.2 x 4.5 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88967425
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 GMC Jimmy Submodels:
- Base, Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
2001 GMC Jimmy Upper Ball Joint, Front Part Number: 19133669
$67.87 MSRP: $165.60
You Save: $97.73 (60%)
ADD TO CART
Product Specifications
- Other Name: Stud Kit, Front Upper Control Arm Ball; Suspension Ball Joint; Ball Joint; Upper Ball Joints; Steering Knuckle Upper Control Arm; Stud Kit.
- Position: Front Upper
- Replaces: 17980952
- Item Weight: 1.70 Pounds
- Item Dimensions: 6.9 x 4.5 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19133669
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 GMC Jimmy Submodels:
- Base, Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
2001 GMC Jimmy Ball Joint, Front Lower Part Number: 19416895
$20.58 MSRP: $50.23
You Save: $29.65 (60%)
ADD TO CART
Product Specifications
- Other Name: Stud Kit, Front Lower Control Arm Ball; Ball Joints; Lower Ball Joint Kit for Steering Knuckle and Front Wheel Control Arm.
- Position: Front Lower
- Replaces: 09767281, 9767281, 19122185
- Item Weight: 2.00 Pounds
- Item Dimensions: 7.0 x 4.5 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19416895
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 GMC Jimmy Submodels:
- Base, Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS

2001 GMC Jimmy Ball Joint

With a comprehensive array of OEM 2001 GMC Jimmy Ball Joint, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 GMC Jimmy Ball Joint are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 GMC Jimmy Ball Joint Parts and Q&A

Q: How to service the lower ball joint on 2001 GMC Jimmy?
A: Start servicing the lower Ball Joint by raising and supporting the vehicle before taking off its tire and wheel components. After taking off the Torsion Bar you should remove the wheel drive shaft from its position. Start with a 3.175mm (1/8 inch) drill to make a 6.35mm (1/4 inch) deep hole at the center of lower Ball Joint rivet. Shift to a 12.7mm (1/2 inch) drill to remove the rivet heads. Push the pin punch through each rivet to unfasten them before taking the lower Ball Joint out of the Control Arm. Slip the lower Ball Joint onto its position on the lower Control Arm while keeping to the fastener notice instructions. Connect the lower Ball Joint bolts and nuts then tighten them to 23 nm (17 ft. Lbs.) torque. Put the wheel drive shaft back and position the Torsion Bar before putting tire and wheel together. After putting the vehicle down end to end check the front wheel alignment.